Search

One of the main applications of the gravity field and steady-state Ocean Circulation Explorer (GOCE) satellite data is their combination with local gravity anomalies for geoid and gravity field modeling purposes. The aim of the present paper was the determination of an improved geoid model for the wider Hellenic area, using original GOCE SGG data filtered to retain only useful signals inside the measurement bandwidth (MBW) of the satellite. The filtered SGGs, originally at the satellite altitude, were projected to a mean orbit (MO) and then downward continued to the Earth’s surface (ES) in order to be combined with local gravity anomalies. For the projection to an MO, grids of disturbing gravity gradients from a global geopotential model (GGM) were used, computed per 1 km from the maximum satellite altitude to that of the MO. The downward continuation process was then undertaken using an iterative Monte Carlo (MC) simulated annealing method with GGM gravity anomalies on the ES used as ground truth data. The final geoid model over the wider Hellenic area was estimated, employing the remove–compute–restore method and both Fast Fourier Transform (FFT) and Least Squares Collocation (LSC). Gravity-only, GOCE-only and combined models using local gravity and GOCE data were determined and evaluation of the results was carried out against available GNSS/levelling data in the study area. From the results achieved, it was concluded that even when FFT is used, so that a combined grid of local gravity and GOCE data is used, improvements to the differences regarding GNSS/levelling data by 14.53% to 27.78% can be achieved. The geoid determination with LSC was focused on three different areas over Greece, with different characteristics in the topography and gravity variability. From these results, improvements from 14.73%, for the well-surveyed local data of Thessaly, to 32.88%, over the mountainous area of Pindos, and 57.10% for the island of Crete for 57.10% were found.

Summarization: This work presents the latest calibration results for the Copernicus Sentinel-3A and -3B and the Jason-3 radar altimeters as determined by the Permanent Facility for Altimetry Calibration (PFAC) in west Crete, Greece. Radar altimeters are used to provide operational measurements for sea surface height, significant wave height and wind speed over oceans. To maintain Fiducial Reference Measurement (FRM) status, the stability and quality of altimetry products need to be continuously monitored throughout the operational phase of each altimeter. External and independent calibration and validation facilities provide an objective assessment of the altimeter’s performance by comparing satellite observations with ground-truth and in-situ measurements and infrastructures. Three independent methods are employed in the PFAC: Range calibration using a transponder, sea-surface calibration relying upon sea-surface Cal/Val sites, and crossover analysis. Procedures to determine FRM uncertainties for Cal/Val results have been demonstrated for each calibration. Biases for Sentinel-3A Passes No. 14, 278 and 335, Sentinel-3B Passes No. 14, 71 and 335, as well as for Jason-3 Passes No. 18 and No. 109 are given. Diverse calibration results by various techniques, infrastructure and settings are presented. Finally, upgrades to the PFAC in support of the Copernicus Sentinel-6 ‘Michael Freilich’, due to launch in November 2020, are summarized. Presented on: Remote Sensing

Summarization: The aim of this work has been to examine the relationship of steep bathymetry in the coastal areas around the permanent Cal/Val facility of Gavdos, and their influence on the produced calibration values for the Jason-2 satellite altimeter. The paper describes how changes in seafloor topography (from 200 to 3500 m depth over a distance of 10 km) are reflected on the determined altimeter parameters using different reference surfaces for satellite calibration. Finally, it describes the relation between these parameter trends and the region’s local characteristics. Using 3.5 years of Jason-2 calibration data and careful data analysis, certain features and variations, with permanent signatures at some locations south of Gavdos, have been found in the altimeter bias values. Causes of these variations have been interpreted. Some of these features, for example, at 12 km south of the Cal/Val site seem to be related to the general oceanographic circulation, but others of short wavelength (in the order of 1 km) are because of the insufficient geoid model resolution. Along Pass No. 109, the concealed effect of bathymetry on the geoid has produced a slope of 3.1 cm over 14–21 km from Gavdos. Along the other Pass No.18 and in the range 12–21 km, a slope in the geoid model, caused again by the sharp changes in the topography of seafloor (from 300 to 3200 m depth over a distance of 10 km), have been discovered. Those geoid model imperfections of short wavelength do not change the previously reported bias values. Finally, boat campaigns that took place for verifying the previous features, were also used to determine an altimeter bias of B = +19.6 ± 4.5 cm, for cycle = 80, at 15:14:58 UTC, on 7-Sept-2010, along Pass No. 109. Calibration took place at a distance of about 19 km south of Gavdos, in the open sea while Jason-2 was flying over. Presented on: Advances in Space Research

Summarization: Satellite altimetry provides exceptional means for absolute and undisputable monitoring of changes in sea level and inland waters (rivers and lakes), over regional to global scales, with accuracy and with respect to the center of mass of the Earth. Altimetry system's responses have to be continuously monitored for their quality, biases, errors, drifts, etc. with calibration. Absolute calibration of altimeters is achieved by external and independent to satellite facilities on the ground. This is the mainstay for a continuous, homogenous, and reliable monitoring of the earth and its oceans. This paper describes the development of the Permanent Facility for Altimetry Calibration in Gavdos/Crete, Greece, as of 2001 along with its infrastructure and instrumentation. Calibration results are presented for the reference missions of Jason-1, Jason-2, and Jason-3. Then, this work continues with the determination of relative calibrations with respect to reference missions for Sentinel-3A, HY-2A, and SARAL/AltiKa. Calibration results are also given for Jason-2 and Jason-3 altimeters using the transponder at the CDN1 Cal/Val site on the mountains of Crete, with simultaneous comparisons against sea-surface calibration and during their tandem mission. Finally, the paper presents procedures for estimating uncertainties for altimeter calibration to meet the Fiducial Reference Measurement standards. Presented on: Remote Sensing

Summarization: In this work, absolute calibration of the Chinese HY-2 satellite altimetry mission is carried out, employing Pass No. 280 and the calibration facility, CRS1, located in the Southwest end of the island of Crete, Greece. Satellite Pass No. 280 is descending and follows a ground track almost parallel to the west coast of Crete. It comes close to the coast, at a distance of about 9 km from the CRS1 calibration site, and finally goes away south of Crete. The HY-2 sensor geophysical data records (S-GDR) have been incorporated into the calibration procedures and processing has taken place for cycles No. 54–62, at 20 Hz data rate. Some peculiarities in the HY-2 satellite altimeter data, as delivered and depicted in the I-GDR and S-GDR data, have also been noticed. All calibration results have been determined using a regional, precise and detailed geoid, along with a good knowledge of local ocean circulation and site characteristics and a well-defined sea-surface calibration methodology. The first preliminary results for the HY-2 altimeter calibration have shown that the initial cycles, up to No. 51, display an erratic behavior. After those cycles, the altimeter range bias values seem to be stable and reach a value of B = −45.6 cm ± 4.4 cm, when applying the net instrument corrections as provided in the GDR. If the relativistic effects of the satellite clocks are properly applied for the net instrument corrections, then the altimeter range bias goes down to B = −27 cm ± 3 cm. Also, preliminary cross-over analysis with the SARAL/AliKa and Jason-2 satellites show a bias of B = −23 cm, and B = −28.5 cm, respectively. The performance of the HY-2 on-board radiometer has also been examined in terms of the wet troposphere corrections and shows a mean difference of −1 cm ± 0.1 cm with respect to in-situ GNSS-derived corrections. Finally, the ionosphere path corrections of the HY-2 satellite show a difference of +1 cm ± 1.1 cm, when compared against the GNSS-derived ionosphere values. Presented on