Search

A self-assembled nanodielectric (SAND) is an ultrathin film, typically with periodic layer pairs of high-k oxide and phosphonic-acid-based π-electron (PAE) molecular layers. IPAE, having a molecular structure similar to that of PAE but with an inverted dipole direction, has recently been developed for use in thin-film transistors. Here we report that replacing PAE with IPAE in SAND-based thin-film transistors induces sizable threshold and turn-on voltage shifts, indicating the flipping of the built-in SAND polarity. The bromide counteranion (Br-) associated with the cationic stilbazolium portion of PAE or IPAE is of great importance, because its relative position strongly affects the electric dipole moment of the organic layer. Hence, a set of X-ray synchrotron measurements were designed and performed to directly measure and compare the Br- distributions within the PAE and IPAE SANDs. Two trilayer SANDs, consisting of a PAE or IPAE layer sandwiched between an HfOx and a ZrOx layer, were deposited on the SiOx surface of Si substrates or periodic Si/Mo multilayer substrates for X-ray reflectivity and X-ray standing wave measurements, respectively. Along with complementary DFT simulations, the spacings, elemental (Hf, Br, and Zr) distributions, molecular orientations, and Mulliken charge distributions of the PAE and IPAE molecules within each of the SAND trilayers were determined and correlated with the dipole inversion.

Improved understanding of fundamental structure–property relationships, particularly the effects of molecular shape and intermolecular packing on film morphology and active layer charge transport characteristics, enables more rational synthesis of new p-type small molecules. Here we investigate a series of small molecules consisting of an acene-based electron-rich core flanked by one or two electron-deficient diketopyrrolopyrrole (DPP) moieties. Through minor changes in the molecule structures, measurable variations in the crystal structure and sizable differences in macroscopic properties are achieved. The molecular symmetry as well as the conformation of the side chains affects the unit cell packing density and strength of the intermolecular electronic coupling in single crystals of all molecules in this series. The addition of a second DPP unit to the benzodithiophene (BDT) core increases molecular planarity leading to decreased reorganization energy, strong cofacial coupling, and moderate hole mobility (2.7 × 10−4 cm2 V−1 s−1). Increasing the length of the acene core from benzodithiophene to naphthodithiophene (NDT) results in a further reduction in reorganization energy and formation of smaller crystalline domains (∼11 nm) when mixed with PCBM. Decreasing the aspect ratio of the core using a “zig-zag” naphthodithiophene (zNDT) isomer results in the highest hole mobility of 1.3 × 10−3 cm2 V−1 s−1 due in part to tight lamellar (d = 13.5 A) and π–π stacking (d = 3.9 A). The hole mobility is directly correlated with the short-circuit current (11.7 mA cm−2) and solar cell efficiency (4.4%) of the highest performing zNDT:PCBM device. For each of these small molecules the calculated π-coupling constant is correlated with the hole mobility as a function of crystal structure and orientation indicating the importance of designing molecules that create extended crystalline networks with maximal π-orbital overlap.

The recent emergence of a wide variety of two-dimensional (2D) materials has created new opportunities for device concepts and applications. In particular, the availability of semiconducting transition metal dichalcogenides, in addition to semi-metallic graphene and insulating boron nitride, has enabled the fabrication of all 2D van der Waals heterostructure devices. Furthermore, the concept of van der Waals heterostructures has the potential to be significantly broadened beyond layered solids. For example, molecular and polymeric organic solids, whose surface atoms possess saturated bonds, are also known to interact via van der Waals forces and thus offer an alternative for scalable integration with 2D materials. Here, we demonstrate the integration of an organic small molecule p-type semiconductor, pentacene, with a 2D n-type semiconductor, MoS2. The resulting p-n heterojunction is gate-tunable and shows asymmetric control over the anti-ambipolar transfer characteristic. In addition, the pentacene-MoS2 heterojunction exhibits a photovoltaic effect attributable to type II band alignment, which suggests that MoS2 can function as an acceptor in hybrid solar cells., Comment: 5 figures and supporting information. To appear in Nano Letters

Perylenediimides (PDIs) are among the best performing organic luminescent materials, both in terms of emission efficiency and chemical and photochemical stability because of their rigid, symmetric and planar structure; however, they exhibit very small Stokes shifts. The sizeable reabsorption of the emitted light limits the performances of perylenediimides in imaging applications and luminescent solar concentrators. Perylenemonoimides (PMIs) having an electron donating substituent in one of the free peri positions feature larger Stokes shift values while retaining high chemical stability. The selection of the most appropriate donor, both in terms of electron donating capability and steric demand, boosts emission efficiency and limits reabsorption losses. The synthesis, optical spectroscopy, molecular orbital computations, UPS, electrochemical, spectroelectrochemical, and multinuclear NMR investigation of a series of PMI derivatives functionalized with donors having different electronic characteristics and steric demands are discussed. Results are relevant for the fabrication of single layer plastic luminescent solar concentrators (LSC).

The design, synthesis and characterization of five diphenylhydrazone end capped molecules as donors for Bulk Heterojunction (BHJ) solar cells are described. The use of the hydrazone donor instead of the more common amine one is advantageous in terms of synthetic access and overall stability. We show that the variation of both the nature and the substitution pattern of the electron deficient conjugated bridge enables the tuning of the optical energy gap as well as of the HOMO and LUMO. In particular, our data show that the low energy shift of the HOMO level along the series of hydrazone compounds, one of the critical parameters affecting the performance of BHJ cells, is as high as 0.42 eV. We tested all derivatives as donors in a BHJ configuration, using the fullerene derivative [6,6]-phenyl-C-71-butyric acid methyl ester (PC71BM) as the acceptor. We found that the trend we observed in the progressive stabilization of the chromophore HOMO level upon increasing the electron accepting capabilities of the conjugated bridge is reflected in the progressive increase of the cell open circuit voltage (V-oc). Our preliminary results show that it is possible to obtain a V-oc as high as 0.74 V, along with a power conversion efficiency of 1.2%.