Search

In this study, the variations of spray characteristics are tested with air-assisted siphon type different size liquid atomizers. The spray characteristics are analyzed considering three atomizers having the same inlet diameter, with different constricted areas and exit diameters for the flow rates of 42, 57, and 71l pm. Three different mixtures of Oleic Acid with Ethanol, and three different mixtures of Di-Octyl Phthalate (DOP) with Ethanol are employed as working fluids along with the six different suction heights. Experimental outcomes show that, for the same flow rates, solution, and suction height, the droplet size changes by varying the diameter of the constricted area and exit area. The change of any area in atomizer changes the level of turbulence in flow that results in the variation of droplet size and its distribution. The increasing flow rate also assists in increasing the droplet size. Since the droplet size distribution decreases with the increasing viscosity, the use of DOP and Ethanol mixture increases the droplet size as it is more viscous than the Oleic Acid and Ethanol mixture. It is also noticed that at a constant airflow rate, Number Median Aerodynamic Diameter (NMAD), and liquid consumption rate are inversely proportional, whereas the Geometrical Standard Deviation (GSD) and Mass Median Aerodynamic Diameter (MMAD) is directly proportional to the suction height.

The study of interfacial Dzyaloshinskii–Moriya interaction (DMI) in perpendicularly magnetized structurally asymmetric heavy metal/ferromagnet multilayer systems is of high importance due to the formation of chiral magnetic textures in the presence of DMI. Here, we report the impact of cobalt oxidation at the Co/AlO x interface in Pt/Co/AlO x trilayer structures on the DMI by varying the post-growth annealing time, Al thickness and substrate. To quantify DMI we employed magneto-optical imaging of the asymmetric domain wall expansion, hysteresis loop shift, and spin-wave spectroscopy techniques. We further correlated the Co oxidation with low-temperature Hall effect measurements and x-ray photoelectron spectroscopy. Our results emphasize the importance of full characterization of the magnetic films that could be used for magnetic random access memory technologies when subjected to the semiconductor temperature processing conditions, as the magnetic interactions are critical for device performance and can be highly sensitive to oxidation and other effects.

Understanding the interfaces in heterostructures at an atomic scale is crucial in enabling the possibility to manipulate underlying functional properties in correlated materials. This work presents a detailed study on the atomic structures of heterogeneous interfaces in La0.7Sr0.3MnO3 (LSMO) film grown epitaxially on c-Al2O3 (0001) with a buffer layer of MgO. Using aberration-corrected scanning transmission electron microscopy, we detected nucleation of periodic misfit dislocations at the interfaces of the large misfit systems of LSMO/MgO and MgO/c-Al2O3 following the domain matching epitaxy paradigm. It was experimentally observed that the dislocations terminate with 4/5 lattice planes at the LSMO/MgO interface and with 12/13 lattice planes at the MgO/c-Al2O3 interface. This is consistent with theoretical predictions. Using the atomic-resolution image data analysis approach to generate atomic bond length maps, we investigated the atomic displacement in the LSMO/MgO and MgO/c-Al2O3 systems. Minimal presence of residual strain was shown at the respective interface due to strain relaxation following misfit dislocation formation. Further, based on electron energy-loss spectroscopy analysis, we confirmed an interfacial interdiffusion within two monolayers at both LSMO/MgO and MgO/c-Al2O3 interfaces. In essence, misfit dislocation configurations of the LSMO/MgO/c-Al2O3 system have been thoroughly investigated to understand atomic-scale insights on atomic structure and interfacial chemistry in these large misfit systems.

We studied the structural transformations and atomic rearrangements in strontium titanate (SrTiO3) via nanosecond pulsed laser irradiation-induced melting and ultrafast quenching. Using scanning transmission electron microscopy, we determine that the laser-irradiated surface in single-crystalline SrTiO3 transforms into an amorphous phase with an interposing disordered crystalline region between amorphous and ordered phases. The formation of disordered phase is attributed to the rapid recrystallization of SrTiO3 from the melt phase constrained by an epitaxial relation with the pristine region, which eases up on the surface, leading to amorphous phase formation. With electron energy-loss spectroscopic analysis, we confirm the transformation of Ti+4 to Ti+3 due to oxygen vacancy formation as a result of laser irradiation. In the disordered region, the maximum transformation of Ti+4 is observed to be 16.2 ± 0.2%, whereas it is observed to be 20.2 ± 0.2% in the amorphous region. Finally, we deduce that the degree of the disorder increases from atomically disordered to amorphous transition in SrTiO3 under laser-irradiation. The signatures of short-range ordering remain similar, leading to a comparable fingerprint of electronic structure. With these results, this study addresses the gap in understanding the atomic and electronic structure modified by pulsed laser irradiation and functionalizing pristine SrTiO3 for electronic, magnetic, and optical applications.