Search

Powerful subsonic underwater discharges are used as a tool in various industrial applications. The aim of this article is to find the essential design parameters required for a pulsed-power system to efficiently drive such discharges. Using different capacitor banks and electrode geometries, a large number of studies were conducted in an effort to better understand the phenomenology of the discharge. Without developing a numerical model for the underwater plasma discharge, the phenomenological studies clearly demonstrated that the maximum pressure that can be generated depends on the discharge current, the distance between the electrodes, and the characteristic time of the discharge. The results of this work will allow the design of efficient pulsed-power-driven strong pressure impulse systems. [ABSTRACT FROM AUTHOR]

A number of high-power applications require a transportable high-energy, high-current GW generator to drive a pulsed power system at the output. A first prototype, based on exploding wire technology and using an H-bridge circuit configuration, was developed at Loughborough University a few years ago and has been previously reported. The present stage of the work has necessitated the development of a more powerful and energetic source, and this is now based on inductive storage technology. A 400 kJ capacitor bank is connected by a high-Coulomb explosively driven closing switch with an air-cored 0.6 MV transformer, an exploding wire array, and a high-power diode based on a polarity-dependent spark-gap completing the arrangement. The GW generator, including the command and control module, is accommodated in two ISO containers. The various components of the generator are described in this paper, together with results obtained from full-scale tests. [ABSTRACT FROM PUBLISHER]

SPHINX is a microsecond linear transformer driver LTD, used essentially for implosion of Z-pinch loads in direct drive mode. It can deliver a 6-MA current pulse within 800 ns into a Z-pinch load. The dynamic load current multiplier concept enables the current pulse to be modified by increasing its amplitude while reducing its rise time before being delivered to the load. This compact system is made up of concentric electrodes (autotransformer), a dynamic flux extruder (cylindrical wire array), a vacuum convolute (eight postholes), and a vacuum closing switch, which is the key component of the system. Several different schemes are investigated for designing a vacuum switch suitable for operating the dynamic load current multiplier on the SPHINX generator for various applications, including isentropic compression experiments and Z-pinch radiation effects studies. In particular, the design of a compact vacuum surface switch and a multichannel vacuum switch, located upstream of the load are studied. Electrostatic simulations supporting the switch designs are presented along with test bed experiments. Initial results from shots on the SPHINX driver are also presented. [ABSTRACT FROM PUBLISHER]

SPHINX is a microsecond linear transformer driver located at Atomic Energy Comission (CEA) Gramat (France), which can deliver a current pulse of 6 MA within 800 ns in a Z -pinch load. Using the concept of the dynamic load current multiplier (DLCM), which was proposed by Chuvatin, we expect to increase the load current above 6 MA, while decreasing its rise time to \sim300 ns. The DLCM developed by the CEA Gramat and International Technologies for High Pulsed Power (ITHPP) is a compact system made up of concentric electrodes (autotransformer), a dynamic flux extruder (cylindrical wire array), a vacuum convolute (eight post-hole rods), and a closing switch (compact vacuum surface switch). The latter is a key component of the system, which is used to prevent the current from flowing into the load until the inductance builds up due to the implosion of the wire array. This paper presents the design and testing of the DLCM surface switch, resulting from both electrostatic simulations and experiments on the SPHINX generator. These studies, carried out either with or without load (open circuit), were valuable for a first experimental evaluation of the DLCM scheme in a microsecond regime and provided detailed information on the surface switch behavior. [ABSTRACT FROM AUTHOR]

Nowadays, a broad range of modern defense applications requires compact pulsed power generators to produce high-power electromagnetic waves. In a conventional design, such generators consist of a primary energy source and an antenna, separated by a power-amplification system, such as a Marx generator or a Tesla transformer, which forwards the energy from the source to the antenna. The present system, however, uses a novel and very compact high-voltage resonant pulsed transformer to drive a dipole antenna. The complete pulsed power source, termed MOUNA (French acronym for “Module Oscillant Utilisant une Nouvelle Architecture”), is composed of a set of batteries, a dc/dc converter for charging four capacitors, four synchronized spark gap switches, a resonant pulsed transformer that can generate 555 kV/265 ns pulses, an oil peaking switch and, during preliminary testing, a dipole antenna. The paper not only provides design details for each system component, but also presents the mechanical arrangement of the complete pulsed power system and the electrical diagnostics, particularly those related to measurement of the resonant transformer output waveform, the line oscillations, and the radiated electric field. [ABSTRACT FROM PUBLISHER]