Search

• The optimization of 10 important design parameters of a GCPV plant is introduced. • The IRR objective function includes both technical and economic aspects. • Genetic algorithm is suitable and effective to find the global optimum. • Optimal configurations are presented for six locations worldwide. • The effects of decreasing PV module costs on optimal plant design are analysed. The increasing penetration of photovoltaic (PV) technology calls for the development of an effective method for optimization of grid-connected photovoltaic power plants. This paper presents a simultaneous optimization method of ten important design parameters of a PV plant, including the module power, inverter sizing, support structure dimensions, cable losses, module orientation and row spacing. A mathematical PV performance model taking into account the important effects and losses and an economic cost model were developed and presented in detail. The objective function is the internal rate of return and the optimization is performed by a genetic algorithm. The results show that the proposed models and method are capable to optimize the grid-connected PV plant and provide reliable results after a 6–7 min calculation time. The method was demonstrated in detail for a Hungarian location, including the losses and cost structure of the optimal plant configuration. The optimization was also performed for 5 additional sites around the world to assess the effect of location and meteorology. The impact of the decreasing PV module prices on the optimal design is calculated to identify the expected future trends in PV plant design. The presented optimization method can be utilized to facilitate the optimal design of commercial PV plants and for research purposes. [ABSTRACT FROM AUTHOR]

Abstract: A new application of the cost function-based rearrangement of genes (proposed by Liu (2008) ) is presented in this paper through the genetic algorithm-based solution of the inverse heat conduction problem of identifying the temperature dependent thermal conductivity of a solid material using transient temperature histories. The inverse problem was defined according to the evaluation of the BICOND thermophysical property measurement method. Through the solution of the inverse problem (using simulated measurements), different approaches of the application of the rearrangement of genes were studied and compared. Application of the rearrangement significantly improved the convergence performance and accuracy of the inverse solution compared to a real-valued genetic algorithm, which was adapted to the problem by the authors. In the algorithm that performed best, the rearrangement was applied in an approach different from Liu’s. The effect of random noise added to the temperature history and the effect of regularization was also studied. With significant improvement in computational efficiency, the proposed algorithm is likely to be very effective in evaluation of real measured temperature histories to determine thermophysical properties. [Copyright &y& Elsevier]

Simultaneous inverse identification of the temperature-dependent volumetric heat capacity and thermal conductivity of a solid material based on transient temperature histories was studied. The inverse problem was defined according to the evaluation of the BICOND thermophysical property measurement method. The material property functions were defined by several data points with linear interpolation between them. In this way, no previous information is needed about the expected temperature dependency of the material property functions. The inverse problem was solved by a real-valued genetic algorithm using simulated measurement results. New genetic operators (smooth initialization and smooth mutation) were developed and applied. The accuracy of the inverse solution was studied in two test cases including linear, square, and sinusoidal functions. The effects of regularization and random noise in the temperature histories were also analyzed. Based on the results, the proposed method is likely to be effective in evaluation of real measured temperature histories to simultaneously determine temperature-dependent thermophysical properties. [ABSTRACT FROM AUTHOR]

Photovoltaic (PV) power is emission-free during operation. However, its life-cycle environmental impacts should be accounted for during the design phase. This paper presents the first methodology to calculate the product environmental footprint (PEF) and the levelized cost of electricity (LCOE) based on a unified technical modeling framework of ground-mounted, grid-connected PV power plants. To test the model, we determined the single- and multiobjective optima of 8 main balance-of-system design parameters applying a genetic algorithm for a case study of two geographical locations with distinct solar resources. Results show that impacts can be reduced by 1–13% in each of the 16 different PEF environmental impact categories. Unfortunately, the different types of impacts cannot be reduced simultaneously with a single design solution, calling for the use of a weighted environmental footprint as the most favorable single-score environmental indicator. Pareto-optimal design solutions for multiple objectives show that increasing the AC/DC ratio, row distance, tilt angle, and cable losses compared to the economic optimum is beneficial for carbon and environmental footprint reduction. By accepting a small cost increase, the majority of the potential impact reduction can be achieved. Trade-offs between economic and environmental objectives are analyzed by assigning a price tag to environmental impacts. Based on the proposed weighting scheme, regions with polluting electricity production mix should choose the most profitable plant design for the largest environmental benefit. In other places eco-design could lead to a 1% overall impact reduction for just 0.1% extra cost. Balancing power requirements, copper recycling scenarios, the uncertainty of ecological impacts, and combined land use are identified as future research areas. Image 1 • First study to integrate environmental footprint method in the design of PV plants. • Economic and environmental optimization results in fairly distinctive designs. • Environmental optimization leads to greater capacity factor but larger land area. • Weighting method between environmental and economic objective is proposed. • Taxing environmental impacts leads to a minor change in least-cost design. [ABSTRACT FROM AUTHOR]

• Technical, economic and environmental modeling frameworks are proposed. • Economic and environmental optima of hybrid renewable energy systems are different. • Local climatic conditions highly influence the impacts and the optimal design. • Single- and multi-objective optimization both have advantages and disadvantages. • Installing photovoltaics is the cheapest way to decrease environmental impacts. The rapid spread of renewables made it essential to design optimal hybrid renewable energy systems (HRES) with the distinctive economic and environmental impacts of each technology in mind. According to a comprehensive literature review, very few studies consider life-cycle environmental impacts in small-scale hybrid renewable energy system optimization. This paper aims to fill this gap by providing a multi-objective design framework for household-scale systems based on the technical modeling of several typical components. Solar photovoltaic, wind turbine, solar heat collector, heat pump, heat storage, battery, and as a novelty, heat insulation thickness are considered. Backup power is either drawn from the grid or produced by a diesel generator in grid-connected and off-grid scenarios, respectively. Single objective optimization using genetic algorithm resulted in the least cost and the least environmental footprint options in a case study of three different locations across Europe. Then, Pareto-optimal solutions between the two extremities were explored with a multi-objective genetic algorithm. Single objective results show substantial differences between environmental and economic optima, while multi-objective optimization proved to be an efficient tool to investigate the trade-offs between the two conflicting goals. Solar photovoltaics is proved to be the most competitive technology to reduce environmental impacts in the case of grid-connected systems. Off-grid systems, however, benefit the most from a balanced mix of different renewable energy sources. Life-cycle impacts in the design of systems involving renewables is proven to be relevant while potential applications of the framework are also revealed. Further research areas, as well as the limitations of the methodology are identified in the conclusion. [ABSTRACT FROM AUTHOR]