Search

Pharmacogenomics data can facilitate our understanding of the sources of variability in drug response, which can potentially lead to improved safety and efficacy of drug therapy for individual patients. A key requirement for the development of individualized medicine or personalized therapy is the ability to rapidly and conveniently test patients for genetic polymorphisms and/or mutations. However, in today’s world, genotyping technology remains a bottleneck in clinical applications because of its slow speed and high cost. Therefore, we have recently developed a rapid and cost-effective method for SNP detection, named Smart Amplification Process 2 (SmartAmp2), which enables us to detect genetic polymorphisms or mutations in 30–45 min under isothermal conditions without DNA isolation and PCR amplification. This article presents the SNP detection method and its underlying molecular mechanism as well as clinical research applications.

One single-nucleotide polymorphism (SNP), 538G>A (Gly180Arg), in the ABCC11 gene determines the type of earwax. The G/G and G/A genotypes correspond to the wet type of earwax, whereas A/A corresponds to the dry type. Wide ethnic differences exist in the frequencies of those alleles, reflecting global migratory waves of the ancestors of humankind. We herein provide the evidence that this genetic polymorphism has an effect on the N-linked glycosylation of ABCC11, intracellular sorting, and proteasomal degradation of the variant protein. Immunohistochemical studies with cerumen gland-containing tissue specimens revealed that the ABCC11 WT protein was localized in intracellular granules and large vacuoles, as well as at the luminal membrane of secretory cells in the cerumen gland, whereas granular or vacuolar localization was not detected for the SNP (Arg180) variant. This SNP variant lacking N-linked glycosylation is recognized as a misfolded protein in the endoplasmic reticulum and readily undergoes ubiquitination and proteasomal degradation, which determines the dry type of earwax as a mendelian trait with a recessive phenotype. For rapid genetic diagnosis of axillary osmidrosis and potential risk of breast cancer, we developed specific primers for the SmartAmp method that enabled us to clinically genotype the ABCC11 gene within 30 min.

In a previous study, a single nucleotide polymorphism (SNP) diagnostic system named the SMart Amplification Process version 2 (SMAP 2) was reported, which enabled rapid gene diagnostics from crude samples such as whole blood. The asymmetric primer design and use of Taq MutS were reported as innovative background suppression technologies employed by SMAP 2, but Taq MutS is known to display differential affinities for various mismatch combinations, and hence may not be entirely effective for all possible applications. To address this issue we developed another approach using a competitive probe (CP) to enhance background suppression technology instead of Taq MutS. CP is a 3'-end aminated oligonucleotide that competes with 3'-end of a discrimination primer or the self-priming elongation site on intermediate product 2 (IM2) for non-target sequences, such as the alternative allele. The preferred hybridization kinetics for the full-match CP on the non-target sequence results in effective background suppression in SMAP 2 assays. By using a CP, we demonstrated the sensitive detection of EGFR gene mutations in purified genomic DNA from mixed cell populations. The CP approach is another tool enhancing the effectiveness and versatility of SMAP 2 assays, expanding its potential applications, and reinforcing its position as a highly effective technology for molecular diagnostics.

We developed a simple and rapid single nucleotide polymorphism (SNP) detection system named SMart Amplification Process (SMAP). SMAP is an isothermal nucleic acid amplification method, which uses novel Aac DNA Polymerase isolated from Alicyclobacillus acidocaldarius. Aac DNA Polymerase is in particular suitable isothermal amplification processes having a strand displacement activity. Moreover, SMAP employs an asymmetrical primer design and uses Thermus aquaticus MutS (Taq MutS). Taq MutS is a mismatch binding protein providing a highly effective approach to achieving complete suppression of background amplification derived from mis-amplified DNA. Therefore DNA amplification only occurs with a perfect primer match, and amplification alone is sufficient to identify the target allele. These features of SMAP enable us to perform rapid and precise SNP detection assays. SMAP has immense potential for the development of medical diagnostic products, as for example, to rapidly detect EGFR or K-ras gene mutations at high accuracy. The development of molecular diagnostics along with an increasing knowledge about genomic information has caused a paradigm shift away from the standard protocol of medical care towards pharmacogenomics. This new field of medical science is based on the growing knowledge about genetic alterations and their relationship to specific phenotypes, such as disease predisposition, drug metabolism, and disease development. Due to its ability for high-throughput gene analysis and SNP detection, SMAP is certain to have significant impact in this field.

A key feature of the smart amplification process version 2 (SMAP-2) is the ability to suppress mismatch amplification by using a unique asymmetric primer design and Thermus aquaticus MutS (Taq MutS). However, we report here that use of SMAP-2 for polymorphism determination of the UGT1A1*28 allele required a further ancillary approach for complete background suppression. The UGT1A1*28 allele is a microsatellite copy number polymorphism. This is the first reported SMAP-2 assay designed for genotyping genetic variations of microsatellites. We found that by the addition of a primer to the amplification reaction, called a competitive probe (CP), assay specificity could be significantly enhanced. Including sample preparation time and use of a CP-enhanced SMAP-2 assay, we could rapidly detect the UGT1A1*28 polymorphism within 60 min. To test our method, we compared results from PCR sequencing and the CP-enhanced SMAP-2 assay on 116 human blood samples for UGT1A1*28 polymorphism and demonstrated perfect concordance. These results illustrate the versatility of SMAP-2 for molecular diagnostics and provide a new approach for enhancing SMAP-2 assay specificity.

Purpose: A positive response to gefitinib in non–small cell lung cancer (NSCLC) has been correlated to mutations in epidermal growth factor receptor (EGFR) gene. Previous reports have been based mainly on diagnostic screening by sequencing. However, sequencing is a time-consuming and complicated procedure, not suitable for routine clinical use. Experimental Design: We have developed rapid, simple, and sensitive mutation detection assays based on the SMart Amplification Process (SMAP) and applied it for analyzing EGFR gene mutations in clinical samples. By using SMAP, we can detect mutations within 30 min including sample preparation. To validate the assay system for potential use in clinical diagnostics, we examined 45 NSCLC patients for EGFR mutations using sequencing and SMAP. Results: The outcomes of the SMAP assay perfectly matched the sequencing results, except in one case where SMAP was able to identify a mutation that was not detected by sequencing. We also evaluated the sensitivity and specificity of SMAP in mutation detection for EGFR. In a serial dilution study, SMAP was able to find a mutation in a sample containing only 0.1% of the mutant allele in a mixture of wild-type genomic DNA. We also could show amplification of mutated DNA with only 30 copies per reaction. Conclusions: The SMAP method offers higher sensitivity and specificity than alternative technologies, while eliminating the need for sequencing to identify mutations in the EGFR gene of NSCLC. It provides a robust and point-of-care accessible approach for a rapid identification of most patients likely to respond to gefitinib.

We developed a rapid single nucleotide polymorphism (SNP) detection system named smart amplification process version 2 (SMAP 2). Because DNA amplification only occurred with a perfect primer match, amplification alone was sufficient to identify the target allele. To achieve the requisite fidelity to support this claim, we used two new and complementary approaches to suppress exponential background DNA amplification that resulted from mispriming events. SMAP 2 is isothermal and achieved SNP detection from whole human blood in 30 min when performed with a new DNA polymerase that was cloned and isolated from Alicyclobacillus acidocaldarius (Aac pol). Furthermore, to assist the scientific community in configuring SMAP 2 assays, we developed software specific for SMAP 2 primer design. With these new tools, a high-precision and rapid DNA amplification technology becomes available to aid in pharmacogenomic research and molecular-diagnostics applications.

Activating mutations in the Kirsten rat sarcoma viral oncogene homolog (KRAS) loci are largely predictive of resistance to epidermal growth factor receptor (EGFR) therapy in colorectal cancer (CRC). A highly sensitive detection system for the KRAS gene mutations is urgently needed; however, conventional methods have issues with feasibility and cost performance. Here, we describe a novel detection system using a fluorescence ‘Eprobe’ capable of detecting low level KRAS gene mutations, via real-time PCR, with high sensitivity and simple usability. We designed our Eprobes to be complementary to wild-type (WT) KRAS or to the commonly mutated codons 12 and 13. The WT Eprobe binds strongly to the WT DNA template and suppresses amplification by blocking annealing of the primer during PCR. Eprobe-PCR with WT Eprobe shows high sensitivity (0.05–0.1% of plasmid DNA, 1% of genomic DNA) for the KRAS mutation by enrichment of the mutant type (MT) amplicon. Assay performance was compared to Sanger sequencing using 92 CRC samples. Discrepancies were analyzed by mutation genotyping via Eprobe-PCR with full match Eprobes for 7 prevalent mutations and the next generation sequencing (NGS). Significantly, the Eprobe system had a higher sensitivity for detecting KRAS mutations in CRC patient samples; these mutations could not be identified by Sanger sequencing. Thus, the Eprobe approach provides for highly sensitive and convenient mutation detection and should be useful for diagnostic applications.

Somatic mutation in human epidermal growth factor receptor-related 2 gene (HER2) is one of the driver mutations in lung cancer. HER2 mutations are found in about 2% of lung adenocarcinomas (ADCs). Previous reports have been based mainly on diagnostic screening by Sanger sequencing or next-generation sequencing (NGS); however, these methods are time-consuming and complicated. We developed a rapid, simple, sensitive mutation detection assay for detecting HER2 12 base pair-duplicated insertion mutation based on the Eprobe-mediated PCR method (Eprobe-PCR) and validated the sensitivity of this assay system for clinical diagnostics. We examined 635 tumor samples and analyzed HER2 mutations using the Eprobe-PCR method, NGS, and Sanger sequencing. In a serial dilution study, the Eprobe-PCR was able to detect mutant plasmid DNA when its concentration was reduced to 0.1% by mixing with wild-type DNA. We also confirmed amplification of the mutated plasmid DNA with only 10 copies per reaction. In ADCs, Eprobe-PCR detected the HER2 mutation in 2.02% (9/446), while Sanger sequencing detected it in 1.57% (7/446). Eprobe-PCR was able to detect the mutation in two samples that were undetectable by Sanger sequencing. All non-ADC samples were wild-type. There were no discrepancies between frozen and formalin-fixed paraffin-embedded tissues in the nine samples. HER2 mutations detected by NGS data validated the high sensitivity of the method. Therefore, this new technique can lead to precise molecular-targeted therapies.

Most commonly used intercalating fluorescent dyes in DNA detection are lacking any sequence specificity, whereas so-called Exciton Primers can overcome this limitation by functioning as “sequence-specific dyes.” After hybridization to complementary sequences, the fluorescence of Exciton Primers provides sequence-specific signals for real-time monitoring of amplification reactions. Applied to the SmartAmp2 mutation detection process, Exciton Primers show high signal strength with low background leading to a superior specificity and sensitivity compared to SYBR Green I. Signal strength can be further enhanced using multiple dyes within one Exciton Primer or use of multiple Exciton Primers in the same amplification reaction. Here we demonstrate the use of Exciton Primers for genotyping a single nucleotide polymorphism (SNP) in the VKORC1 locus (−1639G>A) relevant for Warfarin dosing as an example for Exciton Primers mediated genotyping by SmartAmp2. The genotyping assay can use only one labeled Exciton Primer for endpoint detection, or simultaneously by real-time monitoring detect wild-type and mutant alleles in a one-tube reaction using two Exciton Primers having different dyes. Working directly from blood samples, Exciton Primer mediated genotyping by SmartAmp2 offers superior solutions for rapid point-of-care testing. Hum Mutat 31:208–217, 2010. © 2010 Wiley-Liss, Inc.

Sequencing of the human genome in combination with computational annotation has provided tremendous data on predicted genes. However, for most of them, no corresponding cDNAs are available yet. Furthermore, even where cDNA clones were obtained, gene transcripts often have many different splice variants that are not covered by current gene collections. For direct synthesis of cDNA clones corresponding to predicted genes, new splice variants, or any other gene of interest, we established optimal PCR conditions for the direct amplification of exons from genomic DNA, which require a specific Taq aptamer. PCR products comprising differently tagged exons were concatenated by overlap extension into full-length cDNAs. To prove the effectiveness of the approach, the 1900-bp full-length open reading frame of the human mitochondrial aldehyde dehydrogenase (ALDH2) gene was synthesized in a two-step reaction comprising all 13 exons. Thus, our conditions are of general value for in vitro synthesis of cDNAs and alternative splice variants from genomic DNA.