Search

Laboratory automation with robot-assisted processes enhances synthetic biology, but its economic impact on projects is uncertain. We have proposed an experiment price index (EPI) for a quantitative comparison of factors in time, cost, and sample numbers, helping measure the efficiency of laboratory automation in synthetic biology and biomolecular engineering. [ABSTRACT FROM AUTHOR]

Gene targeting (GT) allows precise manipulation of genome sequences, such as knock-ins and sequence substitutions, but GT in seed plants remains a challenging task. Engineered sequence-specific nucleases (SSNs) are known to facilitate GT via homology-directed repair (HDR) in organisms. Here, we demonstrate that Cas12a and a temperature-tolerant Cas12a variant (ttCas12a) can efficiently establish precise and heritable GT at two loci in Arabidopsis thaliana (Arabidopsis) through a sequential transformation strategy. As a result, ttCas12a showed higher GT efficiency than unmodified Cas12a. In addition, the efficiency of transcriptional and translational enhancers for GT via sequential transformation strategy was also investigated. These enhancers and their combinations were expected to show an increase in GT efficiency in the sequential transformation strategy, similar to previous reports of all-in-one strategies, but only a maximum twofold increase was observed. These results indicate that the frequency of double strand breaks (DSBs) at the target site is one of the most important factors determining the efficiency of genetic GT in plants. On the other hand, a higher frequency of DSBs does not always lead to higher efficiency of GT, suggesting that some additional factors are required for GT via HDR. Therefore, the increase in DSB can no longer be expected to improve GT efficiency, and a new strategy needs to be established in the future. This research opens up a wide range of applications for precise and heritable GT technology in plants. Key message: The combination of enhancers, Cas12a, and sequential transformation strategies enables efficient and precise heritable gene targeting in Arabidopsis. [ABSTRACT FROM AUTHOR]

Genetic engineering has become an essential element in developing climate-resilient crops and environmentally sustainable solutions to respond to the increasing need for global food security. Genome editing using CRISPR/Cas [Clustered regulatory interspaced short palindromic repeat (CRISPR)-associated protein (Cas)] technology is being applied to a variety of organisms, including plants. This technique has become popular because of its high specificity, effectiveness, and low production cost. Therefore, this technology has the potential to revolutionize agriculture and contribute to global food security. Over the past few years, increasing efforts have been seen in its application in developing higher-yielding, nutrition-rich, disease-resistant, and stress-tolerant "crops", fruits, and vegetables. Cas proteins such as Cas9, Cas12, Cas13, and Cas14, among others, have distinct architectures and have been used to create new genetic tools that improve features that are important for agriculture. The versatility of Cas has accelerated genomic analysis and facilitated the use of CRISPR/Cas to manipulate and alter nucleic acid sequences in cells of different organisms. This review provides the evolution of CRISPR technology exploring its mechanisms and contrasting it with traditional breeding and transgenic approaches to improve different aspects of stress tolerance. We have also discussed the CRISPR/Cas system and explored three Cas proteins that are currently known to exist: Cas12, Cas13, and Cas14 and their potential to generate foreign-DNA-free or non-transgenic crops that could be easily regulated for commercialization in most countries. [ABSTRACT FROM AUTHOR]

The identification of accurate gene insertion sites on chicken sex chromosomes is crucial for advancing sex control breeding materials. In this study, the intergenic region NC_006127.4 on the chicken Z chromosome and the non-repetitive sequence EE0.6 on the W chromosome were selected as potential gene insertion sites. Gene knockout vectors targeting these sites were constructed and transfected into DF-1 cells. T7E1 enzyme cleavage and luciferase reporter enzyme analyses revealed knockout efficiencies of 80.00% (16/20), 75.00% (15/20), and 75.00% (15/20) for the three sgRNAs targeting the EE0.6 site. For the three sgRNAs targeting the NC_006127.4 site, knockout efficiencies were 70.00% (14/20), 60.00% (12/20), and 45.00% (9/20). Gel electrophoresis and high-throughput sequencing were performed to detect potential off-target effects, showing no significant off-target effects for the knockout vectors at the two sites. EdU and CCK-8 proliferation assays revealed no significant difference in cell proliferation activity between the knockout and control groups. These results demonstrate that the EE0.6 and NC_006127.4 sites can serve as gene insertion sites on chicken sex chromosomes for gene editing without affecting normal cell proliferation. [ABSTRACT FROM AUTHOR]

Genetic engineering at the genomic scale provides a rapid means to evolve microbes for desirable traits. However, in many filamentous fungi, such trials are daunted by low transformation efficiency. Differentially expressed genes under certain conditions may contain important regulatory factors. Accordingly, although manipulating these subsets of genes only can largely reduce the time and labor, engineering at such a sub-genomic level may also be able to improve the microbial performance. Herein, first using the industrially important cellulase-producing filamentous fungus Trichoderma reesei as a model organism, we constructed suppression subtractive hybridization (SSH) libraries enriched with differentially expressed genes under cellulase induction (MMAvicel) and cellulase repression conditions (MM-Glucose). The libraries, in combination with RNA interference, enabled sub-genomic engineering of T. reesei for enhanced cellulase production. The ability of T. reesei to produce endoglucanase was improved by 2.8~3.3-fold. In addition, novel regulatory genes (tre49304, tre120391, and tre123541) were identified to affect cellulase expression in T. reesei. Iterative manipulation using the same strategy further increased the yield of endoglucanase activity to 75.6 U/mL, which was seven times as high as that of the wild type (10.8 U/mL). Moreover, using Humicola insolens as an example, such a sub-genomic RNAi-assisted strain evolution proved to be also useful in other industrially important filamentous fungi. H. insolens is a filamento us fungus commonly used to produce catalase, albeit with similarly low transformation efficiency and scarce knowledge underlying the regulation of catalase expression. By combining SSH and RNAi, a strain of H. insolens producing 28,500 ± 288 U/mL of catalase was obtained, which was 1.9 times as high as that of the parent strain. [ABSTRACT FROM AUTHOR]

Hairless (H) encodes the major antagonist in the Notch signaling pathway, which governs cellular differentiation of various tissues in Drosophila. By binding to the Notch signal transducer Suppressor of Hairless (Su(H)), H assembles repressor complexes onto Notch target genes. Using genome engineering, three new H alleles, HFA, HLLAA and HWA were generated and a phenotypic series was established by several parameters, reflecting the residual H-Su(H) binding capacity. Occasionally, homozygous HWA flies develop to adulthood. They were compared with the likewise semi-viable HNN allele affecting H-Su(H) nuclear entry. The H homozygotes were short-lived, sterile and flightless, yet showed largely normal expression of several mitochondrial genes. Typical for H mutants, both HWA and HNN homozygous alleles displayed strong defects in wing venation and mechano-sensory bristle development. Strikingly, however, HWA displayed only a loss of bristles, whereas bristle organs of HNN flies showed a complete shaft-to-socket transformation. Apparently, the impact of HWA is restricted to lateral inhibition, whereas that of HNN also affects the respective cell type specification. Notably, reduction in Su(H) gene dosage only suppressed the HNN bristle phenotype, but amplified that of HWA. We interpret these differences as to the role of H regarding Su(H) stability and availability. [ABSTRACT FROM AUTHOR]

SUMMARY: Previously, it has been shown that mutagenesis frequencies can be improved by directly fusing the human exonuclease TREX2 to Cas9, resulting in a strong increase in the frequency of smaller deletions at the cut site. Here, we demonstrate that, by using the SunTag system for recruitment of TREX2, the mutagenesis efficiency can be doubled in comparison to the direct fusion in Arabidopsis thaliana. Therefore, we also tested the efficiency of the system for targeted deletion formation by recruiting two other 3′‐5′ exonucleases, namely the human TREX1 and E. coli ExoI. It turns out that SunTag‐mediated recruitment of TREX1 not only improved the general mutation induction efficiency slightly in comparison to TREX2, but that, more importantly, the mean size of the induced deletions was also enhanced, mainly via an increase of deletions of 25 bp or more. EcExoI also yielded a higher amount of larger deletions. However, only in the case of TREX1 and TREX2, the effect was predominately SunTag‐dependent, indicating efficient target‐specific recruitment. Using SunTag‐mediated TREX1 recruitment at other genomic sites, we were able to obtain similar deletion patterns. Thus, we were able to develop an attractive novel editing tool that is especially useful for obtaining deletions in the range from 20 to 40 bp around the cut site. Such sizes are often required for the manipulation of cis‐regulatory elements. This feature is closing an existing gap as previous approaches, based on single nucleases or paired nickases or nucleases, resulted in either shorter or longer deletions, respectively. Significance Statement: Existing CRISPR/Cas‐based gene editing approaches result in either small insertions or deletions of less than 15 bp or in large deletions exceeding 40 bp while induction of medium‐sized deletions which are especially important for the manipulation of cis‐regulatory elements remains challenging. Through SunTag‐mediated recruitment of the human exonuclease TREX1, we were able to increase the efficiency of Cas9‐mediated mutagenesis and enable target‐specific induction of deletions in the range of 20–40 bp. [ABSTRACT FROM AUTHOR]

Gene targeting (GT) is a promising tool for precise manipulation of genome sequences, however, GT in seed plants remains a challenging task. The simple and direct way to improve the efficiency of GT via homology-directed repair (HDR) is to increase the frequency of double-strand breaks (DSBs) at target sites in plants. Here we report an all-in-one approach of GT in Arabidopsis by combining a transcriptional and a translational enhancer for the Cas expression. We find that facilitating the expression of Cas9 and Cas12a variant by using enhancers can improve DSB and subsequent knock-in efficiency in the Arabidopsis genome. These results indicate that simply increasing Cas protein expression at specific timings - egg cells and early embryos - can improve the establishment of heritable GTs. This simple approach allows for routine genome engineering in plants. [ABSTRACT FROM AUTHOR]

Background: The improvement of yeast tolerance to acetic, butyric, and octanoic acids is an important step for the implementation of economically and technologically sustainable bioprocesses for the bioconversion of renewable biomass resources and wastes. To guide genome engineering of promising yeast cell factories toward highly robust superior strains, it is instrumental to identify molecular targets and understand the mechanisms underlying tolerance to those monocarboxylic fatty acids. A chemogenomic analysis was performed, complemented with physiological studies, to unveil genetic tolerance determinants in the model yeast and cell factory Saccharomyces cerevisiae exposed to equivalent moderate inhibitory concentrations of acetic, butyric, or octanoic acids. Results: Results indicate the existence of multiple shared genetic determinants and pathways underlying tolerance to these short- and medium-chain fatty acids, such as vacuolar acidification, intracellular trafficking, autophagy, and protein synthesis. The number of tolerance genes identified increased with the linear chain length and the datasets for butyric and octanoic acids include the highest number of genes in common suggesting the existence of more similar toxicity and tolerance mechanisms. Results of this analysis, at the systems level, point to a more marked deleterious effect of an equivalent inhibitory concentration of the more lipophilic octanoic acid, followed by butyric acid, on the cell envelope and on cellular membranes function and lipid remodeling. The importance of mitochondrial genome maintenance and functional mitochondria to obtain ATP for energy-dependent detoxification processes also emerged from this chemogenomic analysis, especially for octanoic acid. Conclusions: This study provides new biological knowledge of interest to gain further mechanistic insights into toxicity and tolerance to linear-chain monocarboxylic acids of increasing liposolubility and reports the first lists of tolerance genes, at the genome scale, for butyric and octanoic acids. These genes and biological functions are potential targets for synthetic biology approaches applied to promising yeast cell factories, toward more robust superior strains, a highly desirable phenotype to increase the economic viability of bioprocesses based on mixtures of volatiles/medium-chain fatty acids derived from low-cost biodegradable substrates or lignocellulose hydrolysates. [ABSTRACT FROM AUTHOR]

HIV-1 latency remains a barrier to a functional cure because of the ability of virtually silent yet inducible proviruses within reservoir cells to transcriptionally reactivate upon cell stimulation. HIV-1 reactivation occurs through the sequential action of host transcription factors (TFs) during the "host phase" and the viral TF Tat during the "viral phase", which together facilitate the positive feedback loop required for exponential transcription, replication, and pathogenesis. The sequential action of these TFs poses a challenge to precisely delineate the contributions of the host and viral phases of the transcriptional program to guide future mechanistic and therapeutic studies. To address this limitation, we devised a genome engineering approach to mutate tat and create a genetically matched pair of Jurkat T cell clones harboring HIV-1 at the same integration site with and without Tat expression. By comparing the transcriptional profile of both clones, the transition point between the host and viral phases was defined, providing a system that enables the temporal mechanistic interrogation of HIV-1 transcription prior to and after Tat synthesis. Importantly, this CRISPR method is broadly applicable to knockout individual viral proteins or genomic regulatory elements to delineate their contributions to various aspects of the viral life cycle and ultimately may facilitate therapeutic approaches in our race towards achieving a functional cure. [ABSTRACT FROM AUTHOR]

Summary: The ErCas12a nuclease, also known as MAD7, is part of a CRISPR/Cas system from Eubacterium rectale and distantly related to Cas12a nucleases. As it shares only 31% sequence homology with the commonly used AsCas12a, its intellectual property may not be covered by the granted patent rights for Cas12a nucleases. Thus, ErCas12a became an attractive alternative for practical applications. However, the editing efficiency of ErCas12a is strongly target sequence‐ and temperature‐dependent. Therefore, optimization of the enzyme activity through protein engineering is especially attractive for its application in plants, as they are cultivated at lower temperatures. Based on the knowledge obtained from the optimization of Cas12a nucleases, we opted to improve the gene editing efficiency of ErCas12a by introducing analogous amino acid exchanges. Interestingly, neither of these mutations analogous to those in the enhanced or Ultra versions of AsCas12a resulted in significant editing enhancement of ErCas12a in Arabidopsis thaliana. However, two different mutations, V156R and K172R, in putative alpha helical structures of the enzyme showed a detectable improvement in editing. By combining these two mutations, we obtained an improved ErCas12a (imErCas12a) variant, showing several‐fold increase in activity in comparison to the wild‐type enzyme in Arabidopsis. This variant yields strong editing efficiencies at 22 °C which could be further increased by raising the cultivation temperature to 28 °C and even enabled editing of formerly inaccessible targets. Additionally, no enhanced off‐site activity was detected. Thus, imErCas12a is an economically attractive and efficient alternative to other CRISPR/Cas systems for plant genome engineering. [ABSTRACT FROM AUTHOR]

Background: Precise gene targeting (GT) is a powerful tool for heritable precision genome engineering, enabling knock-in or replacement of the endogenous sequence via homologous recombination. We recently established a CRISPR/Cas9-mediated approach for heritable GT in Arabidopsis thaliana (Arabidopsis) and rice and reported that the double-strand breaks (DSBs) frequency of Cas9 influences the GT efficiency. However, the relationship between DSBs and GT at the same locus was not examined. Furthermore, it has never been investigated whether an increase in the number of copies of sgRNAs or the use of multiple sgRNAs would improve the efficiency of GT. Results: Here, we achieved precise GT at endogenous loci Embryo Defective 2410 (EMB2410) and Repressor of Silencing 1 (ROS1) using the sequential transformation strategy and the combination of sgRNAs. We show that increasing of sgRNAs copy number elevates both DSBs and GT efficiency. On the other hand, application of multiple sgRNAs does not always enhance GT efficiency. Our results also suggested that some inefficient sgRNAs would play a role as a helper to facilitate other sgRNAs DSBs activity. Conclusions: The results of this study clearly show that DSB efficiency, rather than mutation pattern, is one of the most important key factors determining GT efficiency. This study provides new insights into the relationship between sgRNAs, DSBs, and GTs and the molecular mechanisms of CRISPR/Cas9-mediated GTs in plants. [ABSTRACT FROM AUTHOR]

Transposons are mobile genetic elements that have invaded all domains of life by moving between and within their host genomes. Due to their mobility (or transposition), transposons facilitate horizontal gene transfer in bacteria and foster the evolution of new molecular functions in prokaryotes and eukaryotes. As transposition can lead to detrimental genomic rearrangements, organisms have evolved a multitude of molecular strategies to control transposons, including genome defense mechanisms provided by CRISPR‐Cas systems. Apart from their biological impacts on genomes, DNA transposons have been leveraged as efficient gene insertion vectors in basic research, transgenesis and gene therapy. However, the close to random insertion profile of transposon‐based tools limits their programmability and safety. Despite recent advances brought by the development of CRISPR‐associated genome editing nucleases, a strategy for efficient insertion of large, multi‐kilobase transgenes at user‐defined genomic sites is currently challenging. The discovery and experimental characterization of bacterial CRISPR‐associated transposons (CASTs) led to the attractive hypothesis that these systems could be repurposed as programmable, site‐specific gene integration technologies. Here, we provide a broad overview of the molecular mechanisms underpinning DNA transposition and of its biological and technological impact. The second focus of the article is to describe recent mechanistic and functional analyses of CAST transposition. Finally, current challenges and desired future advances of CAST‐based genome engineering applications are briefly discussed. [ABSTRACT FROM AUTHOR]

In the field of synthetic biology, rapid advancements in DNA assembly and editing have made it possible to manipulate large DNA, even entire genomes. These advancements have facilitated the introduction of long metabolic pathways, the creation of large-scale disease models, and the design and assembly of synthetic mega-chromosomes. Generally, the introduction of large DNA in host cells encompasses three critical steps: design-cloning-transfer. This review provides a comprehensive overview of the three key steps involved in large DNA transfer to advance the field of synthetic genomics and large DNA engineering. [ABSTRACT FROM AUTHOR]

Research on Cas9 nucleases from different organisms holds great promise for advancing genome engineering and gene therapy tools, as it could provide novel structural insights into CRISPR editing mechanisms, expanding its application area in biology and medicine. The subclass of thermophilic Cas9 nucleases is actively expanding due to the advances in genome sequencing allowing for the meticulous examination of various microorganisms' genomes in search of the novel CRISPR systems. The most prominent thermophilic Cas9 effectors known to date are GeoCas9, ThermoCas9, IgnaviCas9, AceCas9, and others. These nucleases are characterized by a varying temperature range of the activity and stringent PAM preferences; thus, further diversification of the naturally occurring thermophilic Cas9 subclass presents an intriguing task. This study focuses on generating a construct to express a compact Cas9 nuclease (AnoCas9) from the thermophilic microorganism Anoxybacillus flavithermus displaying the nuclease activity in the 37–60 °C range and the PAM preference of 5′-NNNNCDAA-3′ in vitro. Here, we highlight the close relation of AnoCas9 to the GeoCas9 family of compact thermophilic Cas9 effectors. AnoCas9, beyond broadening the repertoire of Cas9 nucleases, suggests application in areas requiring the presence of thermostable CRISPR/Cas systems in vitro, such as sequencing libraries' enrichment, allele-specific isothermal PCR, and others. [ABSTRACT FROM AUTHOR]

Humans have been modifying plant traits for thousands of years, first through selection (i.e., domestication) then modern breeding, and in the last 30 years, through biotechnology. These modifications have resulted in increased yield, more efficient agronomic practices, and enhanced quality traits. Precision knowledge of gene regulation and function through high-resolution single-cell omics technologies, coupled with the ability to engineer plant genomes at the DNA sequence, chromatin accessibility, and gene expression levels, can enable engineering of complex and complementary traits at the biosystem level. Populus spp., the primary genetic model system for woody perennials, are among the fastest growing trees in temperate zones and are important for both carbon sequestration and global carbon cycling. Ample genomic and transcriptomic resources for poplar are available including emerging singlecell omics datasets. To expand use of poplar outside of valorization of woody biomass, chassis with novel morphotypes in which stem branching and tree height are modified can be fabricated thereby leading to trees with altered leaf to wood ratios. These morphotypes can then be engineered into customized chemotypes that produce high value biofuels, bioproducts, and biomaterials not only in specific organs but also in a cell-type-specific manner. For example, the recent discovery of triterpene production in poplar leaf trichomes can be exploited using cell-type specific regulatory sequences to synthesize high value terpenes such as the jet fuel precursor bisabolene specifically in the trichomes. By spatially and temporally controlling expression, not only can pools of abundant precursors be exploited but engineered molecules can be sequestered in discrete cell structures in the leaf. The structural diversity of the hemicellulose xylan is a barrier to fully utilizing lignocellulose in biomaterial production and by leveraging cell-type-specific omics data, cell wall composition can be modified in a tailored and targeted specific manner to generate poplar wood with novel chemical features that are amenable for processing or advanced manufacturing. Precision engineering poplar as a multi-purpose sustainable feedstock highlights how genome engineering can be used to re-imagine a crop species. [ABSTRACT FROM AUTHOR]

Genome manipulation methods in C. elegans require microinjecting DNA or ribonucleoprotein complexes into the microscopic core of the gonadal syncytium. These microinjections are technically demanding and represent a key bottleneck for all genome engineering and transgenic approaches in C. elegans. While there have been steady improvements in the ease and efficiency of genetic methods for C. elegans genome manipulation, there have not been comparable advances in the physical process of microinjection. Here, we report a simple and inexpensive method for handling worms using a paintbrush during the injection process that nearly tripled average microinjection rates compared to traditional worm handling methods. We found that the paintbrush increased injection throughput by substantially increasing both injection speeds and post-injection survival rates. In addition to dramatically and universally increasing injection efficiency for experienced personnel, the paintbrush method also significantly improved the abilities of novice investigators to perform key steps in the microinjection process. We expect that this method will benefit the C. elegans community by increasing the speed at which new strains can be generated and will also make microinjection-based approaches less challenging and more accessible to personnel and labs without extensive experience. [Display omitted] • A novel method nearly triples C. elegans microinjection efficiency. • Handling worms with a paintbrush significantly increases survival and injection speed. • The paintbrush method improves performance of experienced and novice injectors. [ABSTRACT FROM AUTHOR]

The ever-increasing food requirement with globally growing population demands advanced agricultural practices to improve grain yield, to gain crop resilience under unpredictable extreme weather, and to reduce production loss caused by insects and pathogens. To fulfill such requests, genome engineering technology has been applied to various plant species. To date, several generations of genome engineering methods have been developed. Among these methods, the new mainstream technology is clustered regularly interspaced short palindromic repeats (CRISPR) with nucleases. One of the most important processes in genome engineering is to deliver gene cassettes into plant cells. Conventionally used systems have several shortcomings, such as being labor- and time-consuming procedures, potential tissue damage, and low transformation efficiency. Taking advantage of nanotechnology, the nanoparticle-mediated gene delivery method presents technical superiority over conventional approaches due to its high efficiency and adaptability in different plant species. In this review, we summarize the evolution of plant biomolecular delivery methods and discussed their characteristics as well as limitations. We focused on the cutting-edge nanotechnology-based delivery system, and reviewed different types of nanoparticles, preparation of nanomaterials, mechanism of nanoparticle transport, and advanced application in plant genome engineering. On the basis of established methods, we concluded that the combination of genome editing, nanoparticle-mediated gene transformation and de novo regeneration technologies can accelerate crop improvement efficiently in the future. [ABSTRACT FROM AUTHOR]

Tandem gene duplicates are important parts of eukaryotic genome structure, yet the phenotypic effects of new tandem duplications are not well-understood, in part owing to a lack of techniques to build and modify them. We introduce a method, Recombinase-Mediated Tandem Duplication, to engineer specific tandem duplications in vivo using CRISPR and recombinases. We describe construction of four different tandem duplications of the Alcohol Dehydrogenase (Adh) gene in Drosophila melanogaster, with duplicated block sizes ranging from 4.2 to 20.7 kb. Flies with the Adh duplications show elevated ADH enzyme activity over unduplicated single copies. This approach to engineering duplications is combinatoric, opening the door to systematic study of the relationship between the structure of tandem duplications and their effects on expression. [ABSTRACT FROM AUTHOR]

Summary: The application of the CRISPR/Cas system as a biotechnological tool for genome editing has revolutionized plant biology. Recently, the repertoire was expanded by CRISPR‐Kill, enabling CRISPR/Cas‐mediated tissue engineering through genome elimination by tissue‐specific expression.Using the Cas9 nuclease from Staphylococcus aureus (SaCas9), CRISPR‐Kill relies on the induction of multiple double‐strand breaks (DSBs) in conserved repetitive genome regions, such as the rDNA, causing cell death of the targeted cells. Here, we show that in addition to spatial control by tissue‐specific expression, temporal control of CRISPR‐mediated cell death is feasible in Arabidopsis thaliana.We established a chemically inducible tissue‐specific CRISPR‐Kill system that allows the simultaneous detection of targeted cells by fluorescence markers. As proof of concept, we were able to eliminate lateral roots and ablate root stem cells. Moreover, using a multi-tissue promoter, we induced targeted cell death at defined time points in different organs at select developmental stages.Thus, using this system makes it possible to gain new insights into the developmental plasticity of certain cell types. In addition to enabling tissue engineering in plants, our system provides an invaluable tool to study the response of developing plant tissue to cell elimination through positional signaling and cell‐to‐cell communication. [ABSTRACT FROM AUTHOR]

Introgression of disease resistance genes (R-genes) to fight against an array of phytopathogens takes several years using conventional breeding approaches. Pathogens develop mechanism(s) to escape plants immune system by evolving new strains/races, thus making them susceptible to disease. Conversely, disruption of host susceptibility factors (or S-genes) provides opportunities for resistance breeding in crops. S-genes are often exploited by phytopathogens to promote their growth and infection. Therefore, identification and targeting of disease susceptibility genes (S-genes) are gaining more attention for the acquisition of resistance in plants. Genome engineering of S-genes results in targeted, transgene-free gene modification through CRISPR-Cas-mediated technology and has been reported in several agriculturally important crops. In this review, we discuss the defense mechanism in plants against phytopathogens, tug of war between R-genes and S-genes, in silico techniques for identification of host-target (S-) genes and pathogen effector molecule(s), CRISPR-Cas-mediated S-gene engineering, its applications, challenges, and future prospects. [ABSTRACT FROM AUTHOR]

The past decade witnessed the emergence in Shiga toxin-producing Escherichia coli (STEC) infections linked to the consumption of unpasteurized milk and raw milk cheese. The virulence of STEC is primarily attributed to the presence of Shiga toxin genes (stxl and stx2) carried by Stx-converting bacteriophages, along with the intimin gene eae. Most of the available information pertains to the "Top 7" serotypes associated with STEC infections. The objectives of this study were to characterize and investigate the pathogenicity potential of E. coli UC4224, a STEC O174:H2 strain isolated from semi-hard raw milk cheese and to develop surrogate strains with reduced virulence for use in food-related studies. Complete genome sequence analysis of E. coli UC4224 unveiled the presence of a Stx1a bacteriophage, a Stx2a bacteriophage, the Locus of Adhesion and Autoaggregation (LAA) pathogenicity island, plasmid-encoded virulence genes, and other colonization facilitators. In the Galleria mellonella animal model, E. coli UC4224 demonstrated high pathogenicity potential with an LD50 of 6CFU/10µL. Upon engineering E. coli UC4224 to generate single and double mutant derivatives by inactivating stxla and/or stx2a genes, the LD50 increased by approximately 1 Log-dose in the single mutants and 2 Log-doses in the double mutants. However, infectivity was not completely abolished, suggesting the involvement of other virulence factors contributing to the pathogenicity of STEC O174:H2. Considering the possibility of raw milk cheese serving as a reservoir for STEC, cheesemaking model was developed to evaluate the survival of UC4224 and the adequacy of the respective mutants as reduced-virulence surrogates. All tested strains exhibited the ability to survive the curd cooking step at 48°C and multiplied (3.4 Log CFU) in cheese within the subsequent 24h. These findings indicate that genomic engineering did not exert any unintended effect on the double stx1-stx2 mutant behaviour, making it as a suitable less-virulent surrogate for conducting studies during food processing. [ABSTRACT FROM AUTHOR]

Aldehydes are attractive chemical targets both as end products in the flavors and fragrances industry and as synthetic intermediates due to their propensity for C–C bond formation. Here, we identify and address unexpected oxidation of a model collection of aromatic aldehydes, including many that originate from biomass degradation. When diverse aldehydes are supplemented to E. coli cells grown under aerobic conditions, as expected they are either reduced by the wild-type MG1655 strain or stabilized by a strain engineered for r educed aromatic a ldehyde re duction (the E. coli RARE strain). Surprisingly, when these same aldehydes are supplemented to resting cell preparations of either E. coli strain, under many conditions we observe substantial oxidation. By performing combinatorial inactivation of six candidate aldehyde dehydrogenase genes in the E. coli genome using multiplexed automatable genome engineering (MAGE), we demonstrate that this oxidation can be substantially slowed, with greater than 50% retention of 6 out of 8 aldehydes when assayed 4 h after their addition. Given that our newly engineered strain exhibits r educed o xidation a nd r eduction of aromatic aldehydes, we dubbed it the E. coli ROAR strain. We applied the new strain to resting cell biocatalysis for two kinds of reactions – the reduction of 2-furoic acid to furfural and the condensation of 3-hydroxybenzaldehyde and glycine to form a non-standard β-hydroxy-α-amino acid. In each case, we observed substantial improvements in product titer 20 h after reaction initiation (9-fold and 10-fold, respectively). Moving forward, the use of this strain to generate resting cells should allow aldehyde product isolation, further enzymatic conversion, or chemical reactivity under cellular contexts that better accommodate aldehyde toxicity. • When genes encoding aldehyde reductases are knocked out in Escherichia coli , supplemented aldehydes can undergo oxidation. • For the aromatic aldehydes tested, oxidation is more substantial with resting cells than during aerobic fermentation. • We use multiplex genome engineering to identify the genes responsible for aldehyde oxidation. • The strain we engineered exhibits Reduced Oxidation And Reduction (ROAR), enabling more efficient aldehyde biocatalysis. [ABSTRACT FROM AUTHOR]

Methylotrophic yeasts such as Ogataea polymorpha and Komagataella phaffii (sin. Hansenula polymorpha and Pichia pastoris, respectively) are commonly used in basic research and biotechnological applications, frequently those requiring genome modifications. However, the CRISPR-Cas9 genome editing approaches reported for these species so far are relatively complex and laborious. In this work we present an improved plasmid vector set for CRISPR-Cas9 genome editing in methylotrophic yeasts. This includes a plasmid encoding Cas9 with a nuclear localization signal and plasmids with a scaffold for the single guide RNA (sgRNA). Construction of a sgRNA gene for a particular target sequence requires only the insertion of a 24 bp oligonucleotide duplex into the scaffold. Prior to yeast transformation, each plasmid is cleaved at two sites, one of which is located within the selectable marker, so that the functional marker can be restored only via recombination of the Cas9-containing fragment with the sgRNA gene-containing fragment. This recombination leads to the formation of an autonomously replicating plasmid, which can be lost from yeast clones after acquisition of the required genome modification. The vector set allows the use of G418-resistance and LEU2 auxotrophic selectable markers. The functionality of this setup has been demonstrated in O. polymorpha, O. parapolymorpha, O. haglerorum and Komagataella phaffii. [ABSTRACT FROM AUTHOR]

This review considers research into the treatment of Usher syndrome, a deaf-blindness syndrome inherited in an autosomal recessive manner. Usher syndrome mutations are markedly heterogeneous, involving many different genes, and research grants are limited due to minimal patient populations. Furthermore, gene augmentation therapies are impossible in all but three Usher syndromes as the cDNA sequence exceeds the 4.7 kb AAV packaging limit. It is, therefore, vital to focus research efforts on alternative tools with the broadest applicability. The CRISPR field took off in recent years following the discovery of the DNA editing activity of Cas9 in 2012. New generations of CRISPR tools have succeeded the original CRISPR/Cas9 model to enable more sophisticated genomic amendments such as epigenetic modification and precise sequence alterations. This review will evaluate the most popular CRISPR tools to date: CRISPR/Cas9, base editing, and prime editing. It will consider these tools in terms of applicability (in relation to the ten most prevalent USH2A mutations), safety, efficiency, and in vivo delivery potential with the intention of guiding future research investment. [ABSTRACT FROM AUTHOR]

The Cre/lox recombination system has become a powerful technology for gene function analysis in a broad spectrum of cell types and organisms. In our previous report, Cre protein had been successfully delivered into intact Arabidopsis thaliana cells using electroporation. To expand the feasibility of the method of protein electroporation to other plant cells, here we attempt the protein electroporation into tobacco-derived BY-2 cells, one of the most frequently used plant cell lines for industrial production. In this study, we successfully deliver Cre protein into BY-2 cells with intact cell walls by electroporation with low toxicity. Targeted loxP sequences in the BY-2 genome are recombined significantly. These results provide useful information for genome engineering in diverse plant cells possessing various types of cell walls. [ABSTRACT FROM AUTHOR]

Developing sustainable agricultural practices will require increasing our understanding of plant-microbe interactions. To study these interactions, new genetic tools for manipulating nonmodel microbes will be needed. To help meet this need, we recently reported development of chassis-independent recombinase-assisted genome engineering (CRAGE). CRAGE relies on cassette exchange between two pairs of mutually exclusive lox sites and allows direct, single-step chromosomal integration of large, complex gene constructs into diverse bacterial species. We then extended CRAGE by introducing a third mutually exclusive lox site, creating CRAGE-Duet, which allows modular integration of two constructs. CRAGE-Duet offers advantages over CRAGE, especially when a cumbersome recloning step is required to build single-integration constructs. To demonstrate the utility of CRAGE-Duet, we created a set of strains from the plant-growth-promoting rhizobacterium Pseudomonas simiae WCS417r that expressed various fluorescence marker genes. We visualized these strains simultaneously under a confocal microscope, demonstrating the usefulness of CRAGE-Duet for creating biological systems to study plant-microbe interactions.

Background: Sustainable production of triglycerides for various applications is a major focus of microbial factories. Oleaginous yeast species have been targeted for commercial production of microbial oils. Among all the oleaginous yeasts examined in a previous comparative study, Cutaneotrichosporon oleaginosus showed the highest lipid productivity. Moreover, a new lipid production process for C. oleaginosus with minimal waste generation and energy consumption resulted in the highest lipid productivity in the history of oleaginous yeasts. However, productivity and product diversity are restricted because of the genetic intractability of this yeast. To date, successful targeted genetic engineering of C. oleaginosus has not yet been reported. Results: The targeted gene editing was successfully carried out in C. oleaginosus using CRISPR/Cas system. A tailored enzyme system isolated to degrade the C. oleaginosus cell wall enabled the isolation of viable spheroplasts that are amenable to in-cell delivery of nucleic acids and proteins. The employment of both Cas9 protein and Cas mRNA was effective in obtaining strains with URA5 knockout that did not exhibit growth in the absence of uracil. Subsequently, we successfully created several strains with enhanced lipid yield (54% increase compared to that in wild type) or modified fatty acid profiles comparable with those of cocoa butter or sunflower oil compositions. Conclusion: This study establishes the first targeted engineering technique for C. oleaginosus using the CRISPR/Cas system. The current study creates the foundation for flexible and targeted strain optimizations towards building a robust platform for sustainable microbial lipid production. Moreover, the genetic transformation of eukaryotic microbial cells using Cas9 mRNA was successfully achieved. [ABSTRACT FROM AUTHOR]

Synthetic genomes were designed based on an understanding of natural genomic information, offering an opportunity to engineer and investigate biological systems on a genome-wide scale. Currently, the designer version of the M. mycoides genome and the E. coli genome, as well as most of the S. cerevisiae genome, have been synthesized, and through the cycles of design–build–test and the following engineering of synthetic genomes, many fundamental questions of genome biology have been investigated. In this review, we summarize the use of synthetic genome engineering to explore the structure and function of genomes, and highlight the unique values of synthetic genomics. [ABSTRACT FROM AUTHOR]

Bacteriophage research has been vital to fundamental aspects of modern biology. Advances in metagenomics have revealed treasure troves of new and uncharacterized bacteriophages ('phages') that are not yet understood. However, our ability to find new phages has outpaced our understanding of how sequence encodes function in phages. Traditional approaches for characterizing phages are limited in scale and face hurdles in determining how changes in sequence drive function. We describe powerful emerging technologies that can be used to clarify sequence–function relationships in phages through high-throughput genome engineering. Using these approaches, up to 105 variants can be characterized through pooled selection experiments and deep sequencing. We describe caveats when using these tools and provide examples of basic science and engineering goals that are pursuable using these approaches. High-throughput approaches can generate large libraries of phages that can be screened simultaneously in pooled selection experiments and scored using deep sequencing. Approaches for creating phage libraries frequently have a tradeoff between creating mutations throughout larger areas of a phage genome (breadth) versus our ability to specify mutations (programmability). Untargeted mutagenesis is a simple and effective approach for introducing random mutations and is a useful tool for high-throughput reverse genetics. Targeted mutagenesis can characterize phage–host interactions at a high resolution by accurately mapping key functional regions in a phage genome. Phage deletion libraries can be used to study gene essentiality under different environmental and host conditions, while insertion libraries can be used to characterize metagenomic gene function. [ABSTRACT FROM AUTHOR]

Background: Despite recent advances in genetic engineering tools for effectively regulating and manipulating genes, efficient simultaneous multigene insertion methods have not been established in Bacillus subtilis. To date, multilocus integration systems in B. subtilis, which is one of the main industrial enzyme producers and a GRAS (generally regarded as safe) microbial host, rely on iterative rounds of plasmid construction for sequential insertions of genes into the B. subtilis chromosome, which is tedious and time consuming. Results: In this study, we present development and proof-of-concept of a novel CRISPR-Cas9-based genome-editing strategy for the colorimetric detection of one-step multiple gene insertion in B. subtilis. First, up to three copies of the crtMN operon from Staphylococcus aureus, encoding a yellow pigment, were incorporated at three ectopic sites within the B. subtilis chromosome, rendering engineered strains able to form yellow colonies. Second, a single CRISPR-Cas9-based plasmid carrying a highly specific single guide RNA (sgRNA) targeting crtMN operon and a changeable editing template was constructed to facilitate simultaneous insertion of multiple gene-copies through homology-directed repair (HDR). Upon transformation of engineered strains with engineered plasmids, strains harboring up to three gene copies integrated into the chromosome formed white colonies because of the removal of the crtMN operon, clearly distinguishable from yellow colonies harboring undesired genetic modifications. As a result, construction of a plasmid-less, marker-free, high-expression stable producer B. subtilis strain can be completed in only seven days, demonstrating the potential that the implementation of this technology may bring for biotechnology purposes. Conclusions: The novel technology expands the genome-editing toolset for B. subtilis and means a substantial improvement over current methodology, offering new application possibilities that we envision should significantly boost the development of B. subtilis as a chassis in the field of synthetic biology. [ABSTRACT FROM AUTHOR]

mpkCCDc14 cells, a polarized epithelial cell line derived from mouse kidney cortical collecting ducts, are known to express the vasopressin V2 receptor (V2R) and aquaporin-2 (AQP2) that are responsive to vasopressin. However, a low abundance of the endogenous AQP2 protein in the absence of vasopressin and heterogeneity of AQP2 protein abundance among the cultured cells may limit the further application of the cell line in AQP2 studies. To overcome the limitation, we aimed to establish mpkCCDc14 cells constitutively expressing V2R and AQP2 via CRISPR/Cas9-mediated genome engineering technology (i.e., V2R-AQP2 cells). 3′- and 5′-Junction PCR revealed that the V2R-AQP2 expression cassette with a long insert size (~2.2 kb) was correctly integrated. Immunoblotting revealed the expression of products of integrated Aqp2 genes. Cell proliferation rate and dDAVP-induced cAMP production were not affected by the knock-in of Avpr2 and Aqp2 genes. The AQP2 protein abundance was significantly higher in V2R-AQP2 cells compared with control mpkCCDc14 cells in the absence of dDAVP and the integrated AQP2 was detected. Immunocytochemistry demonstrated that V2R-AQP2 cells exhibited more homogenous and prominent AQP2 labeling intensity in the absence of dDAVP stimulation. Moreover, prominent AQP2 immunolabeling (both AQP2 and pS256-AQP2) in the apical domain of the genome-edited cells was observed in response to dDAVP stimulation, similar to that in the unedited control mpkCCDc14 cells. Taken together, mpkCCDc14 cells constitutively expressing V2R and AQP2 via genome engineering could be exploited for AQP2 studies. [ABSTRACT FROM AUTHOR]

The cytochrome P450 (CYP450) monooxygenase superfamily, which is involved in the biosynthesis pathways of many primary and secondary metabolites, plays prominent roles in plant growth and development. However, systemic information about CYP450s in Brassica napus (BnCYP450) was previously undiscovered and their biological significance are far from understood. Members of clan 86 CYP450s, such as CYP704Bs, are essential for the formation of pollen exine in plant male reproduction, and the targeted mutagenesis of CYP704B genes has been used to create new male sterile lines in many crops. In the present study, a total of 687 BnCYP450 genes were identified in Brassica napus cultivar "Zhongshuang 11" (ZS11), which has nearly 2.8-fold as many CYP450 members as in Arabidopsis thaliana. It is rationally estimated since Brassica napus is a tetraploid oil plant with a larger genome compared with Arabidopsis thaliana. The BnCYP450 genes were divided into 47 subfamilies and clustered into nine clans. Phylogenetic relationship analysis reveals that CYP86 clan consists of four subfamilies and 109 BnCYP450s. Members of CYP86 clan genes display specific expression profiles in different tissues and in response to ABA and abiotic stresses. Two BnCYP450s within the CYP704 subfamily from CYP86 clan, BnCYP704B1a and BnCYP704B1b, display high similarity to MS26 (Male Sterility 26, also known as CYP704B1). These two BnCYP704B1 genes were specifically expressed in young buds. We then simultaneously knocked-out these two BnCYP704B1 genes through a clustered regularly interspaced short palindromic repeats/CRISPR-associated protein 9 (CRISPR/Cas9) genome engineering system. The edited plants displayed a pollenless, sterile phenotype in mature anthers, suggesting that we successfully reproduced genic male sterility (GMS, also known as nuclear male sterility) lines in Brassica napus. This study provides a systemic view of BnCYP450s and offers a strategy to facilitate the commercial utility of the CRISPR/Cas9 system for the rapid generation of GMS in rapeseed via knocking-out GMS controlling genes. [ABSTRACT FROM AUTHOR]

Tools developed in the fields of genome engineering, precise gene regulation, and synthetic gene networks have an increasing number of applications. When shared with the scientific community, these tools can be used to further unlock the potential of precision medicine and tissue engineering. A large number of different genetic elements, as well as modifications, have been used to create many different systems and to validate some technical concepts. New studies have tended to optimize or improve existing elements or approaches to create complex synthetic systems, especially those based on the relatively new CRISPR technology. In order to maximize the output of newly developed approaches and to move from proof-of-principle experiments to applications in regenerative medicine, it is important to navigate efficiently through the vast number of genetic elements to choose those most suitable for specific needs. In this review, we have collected information regarding the main genetic elements and their modifications, which can be useful in different synthetic systems with an emphasis of those based on CRISPR technology. We have indicated the most suitable elements and approaches to choose or combine in planning experiments, while providing their deeper understanding, and have also stated some pitfalls that should be avoided. [ABSTRACT FROM AUTHOR]

The presence and impact of variability in cells as the source material for genome engineering are important to consider for the design, execution and interpretation of outcomes of a genome-engineering process. Variability may be present at the genotype and phenotype level, yet the impact of these sources of variability on a genome-engineering experiment may not be regularly considered by researchers. In this perspective, we use clustered regularly interspaced short palindromic repeat (CRISPR)/CRISPR-associated protein (Cas) genome editing of mammalian cells to provide examples of how variation within or across cell samples may mislead a researcher in their expectations about the cells they are engineering. Furthermore, we highlight the need for understanding the baseline cell genotype and phenotype to appropriately understand the starting cell material and interpret and attribute the impact of engineering on cells. We emphasize that heterogeneity within a cell pool and the inherent variability in the cellular materials used for genome engineering are complex, but of high value to characterize and account for where possible, to move toward the potential of generating desired and predictable engineered products. Provided is a framework cause-and-effect diagram for CRISPR/Cas9 genome editing toward identifying and mitigating potential sources of variability. We encourage researchers to consider the variability of source materials and undertake strategies, which may include those described here, for detecting, attributing and minimizing additional sources of variability where possible toward the aim of fostering greater reliability, confidence and reproducibility in genome-engineering studies. Graphical Abstract [ABSTRACT FROM AUTHOR]

The bacterium Escherichia coli has been well-justified as an effective workhorse for industrial applications. In this study, we developed a toolkit for flexible genome engineering of this microorganism, including site-specific insertion of heterologous genes and inactivation of endogenous genes, such that bacterial hosts can be effectively engineered for biomanufacturing. We first constructed a base strain by genomic implementation of the cas9 and λRed recombineering genes. Then, we constructed plasmids for expressing gRNA, DNA cargo, and the Vibrio cholerae Tn6677 transposon and type I-F CRISPR-Cas machinery. Genomic insertion of a DNA cargo up to 5.5 kb was conducted using a transposon-associated CRISPR-Cas system, whereas gene inactivation was mediated by a classic CRISPR-Cas9 system coupled with λRed recombineering. With this toolkit, we can exploit the synergistic functions of CRISPR-Cas, λRed recombineering, and Tn6677 transposon for successive genomic manipulations. As a demonstration, we used the developed toolkit to derive a plasmid-free strain for heterologous production of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) by genomic knock-in and knockout of several key genes with high editing efficiencies. [ABSTRACT FROM AUTHOR]

CRISPR-Cas allows us to introduce desired genome editing, including mutations, epitopes, and deletions, with unprecedented efficiency. The development of CRISPR-Cas has progressed to such an extent that it is now applicable in various fields, with the help of model organisms. C. elegans is one of the pioneering animals in which numerous CRISPR-Cas strategies have been rapidly established over the past decade. Ironically, the emergence of numerous methods makes the choice of the correct method difficult. Choosing an appropriate selection or screening approach is the first step in planning a genome modification. This report summarizes the key features and applications of CRISPR-Cas methods using C. elegans, illustrating key strategies. Our overview of significant advances in CRISPR-Cas will help readers understand the current advances in genome editing and navigate various methods of CRISPR-Cas genome editing. [ABSTRACT FROM AUTHOR]

Background: Natural life systems can be significantly modified at the genomic scale by human intervention, demonstrating the great innovation capacity of genome engineering. Large epi-chromosomal DNA structures were established in Escherichia coli cells, but some of these methods were inconvenient, using heterologous systems, or relied on engineered E. coli strains. Results: The wild-type model bacterium E. coli has a single circular chromosome. In this work, a novel method was developed to split the original chromosome of wild-type E. coli. With this method, novel E. coli strains containing two chromosomes of 0.10 Mb and 4.54 Mb, and 2.28 Mb and 2.36 Mb were created respectively, designated as E. coli0.10/4.54 and E. coli2.28/2.36. The new chromosomal arrangement was proved by PCR amplification of joint regions as well as a combination of Nanopore and Illumina sequencing analysis. While E. coli0.10/4.54 was quite stable, the two chromosomes of E. coli2.28/2.36 population recombined into a new chromosome (Chr.4.64MMut), via recombination. Both engineered strains grew slightly slower than the wild-type, and their cell shapes were obviously elongated. Conclusion: Finally, we successfully developed a simple CRISPR-based genome engineering technique for the construction of multi-chromosomal E. coli strains with no heterologous genetic parts. This technique might be applied to other prokaryotes for synthetic biology studies and applications in the future. [ABSTRACT FROM AUTHOR]

Viruses are naturally endowed with the capacity to transfer genetic material between cells. Following early skepticism, engineered viruses have been used to transfer genetic information into thousands of patients, and genetic therapies are currently attracting large investments. Despite challenges and severe adverse effects along the way, optimized technologies and improved manufacturing processes are driving gene therapy toward clinical translation. Fueled by the outbreak of AIDS in the 1980s and the accompanying focus on human immunodeficiency virus (HIV), lentiviral vectors derived from HIV have grown to become one of the most successful and widely used vector technologies. In 2022, this vector technology has been around for more than 25 years. Here, we celebrate the anniversary by portraying the vector system and its intriguing properties. We dive into the technology itself and recapitulate the use of lentiviral vectors for ex vivo gene transfer to hematopoietic stem cells and for production of CAR T-cells. Furthermore, we describe the adaptation of lentiviral vectors for in vivo gene delivery and cover the important contribution of lentiviral vectors to basic molecular research including their role as carriers of CRISPR genome editing technologies. Last, we dwell on the emerging capacity of lentiviral particles to package and transfer foreign proteins. [ABSTRACT FROM AUTHOR]

A plethora of CRISPR effectors, such as Cas3, Cas9, and Cas12a, are commonly employed as gene editing tools. Among these, Cas12 effectors developed based on Class II type V proteins exhibit distinct characteristics compared to Class II type VI and type II effectors, such as their ability to generate non-allelic DNA double-strand breaks, their compact structures, and the presence of a single RuvC-like nuclease domain. Capitalizing on these advantages, Cas12 family proteins have been increasingly explored and utilized in recent years. However, the characteristics and applications of different subfamilies within the type V protein family have not been systematically summarized. In this review, we focus on the characteristics of type V effector (CRISPR/Cas12) proteins and the current methods used to discover new effector proteins. We also summarize recent modifications based on engineering of type V effectors. In addition, we introduce the applications of type V effectors for gene editing in animals and plants, including the development of base editors, tools for regulating gene expression, methods for gene targeting, and biosensors. We emphasize the prospects for development and application of CRISPR/Cas12 effectors with the goal of better utilizing toolkits based on this protein family for crop improvement and enhanced agricultural production. [ABSTRACT FROM AUTHOR]

Growing environmental concerns and the urgency to address climate change have increased demand for the development of sustainable alternatives to fossil-derived fuels and chemicals. Microbial systems, possessing inherent biosynthetic capabilities, present a promising approach for achieving this goal. This review discusses the coupling of systems and synthetic biology to enable the elucidation and manipulation of microbial phenotypes for the production of chemicals that can substitute for petroleum-derived counterparts and contribute to advancing green biotechnology. The integration of artificial intelligence with metabolic engineering to facilitate precise and data-driven design of biosynthetic pathways is also discussed, along with the identification of current limitations and proposition of strategies for optimizing biosystems, thereby propelling the field of chemical biology towards sustainable chemical production. [ABSTRACT FROM AUTHOR]

Experimental studies on DNA transposable elements (TEs) have been limited in scale, leading to a lack of understanding of the factors influencing transposition activity, evolutionary dynamics, and application potential as genome engineering tools. We predicted 130 active DNA TEs from 102 metazoan genomes and evaluated their activity in human cells. We identified 40 active (integration-competent) TEs, surpassing the cumulative number (20) of TEs found previously. With this unified comparative data, we found that the Tc1/ mariner superfamily exhibits elevated activity, potentially explaining their pervasive horizontal transfers. Further functional characterization of TEs revealed additional divergence in features such as insertion bias. Remarkably, in CAR-T therapy for hematological and solid tumors, Mariner2_AG (MAG), the most active DNA TE identified, largely outperformed two widely used vectors, the lentiviral vector and the TE-based vector SB100X. Overall, this study highlights the varied transposition features and evolutionary dynamics of DNA TEs and increases the TE toolbox diversity. [Display omitted] • Forty active DNA TEs from mining 102 metazoan genomes increase the TE toolbox diversity • Tc1 elements with high copy numbers and IR-DR structures tend to show high activity • Active TEs show diverged functional features such as insertion profile and cargo capacity • MAG outperforms lentiviral vectors in CAR-T cell therapy A heterologous survey of 130 DNA transposable elements (TEs) in human cells not only unveils evolutionary and functional features linked to transposition activity but also expands the TE-based genome engineering toolbox by incorporating functionally diverse TEs, particularly the highly potent MAG. [ABSTRACT FROM AUTHOR]

Reverse genetics uses loss-of-function alleles to interrogate gene function. The advent of CRISPR/Cas9-based gene editing now allows the generation of knock-out alleles for any gene and entire gene families. Even in the model plant Arabidopsis thaliana, gene editing is welcomed as T-DNA insertion lines do not always generate null alleles. Here, we show efficient generation of heritable mutations in Arabidopsis using CRISPR/Cas9 with a workload similar to generating overexpression lines. We obtain for several different genes Cas9 null-segregants with bi-allelic mutations in the T2 generation. While somatic mutations were predominantly generated by the canonical non-homologous end joining (cNHEJ) pathway, we observed inherited mutations that were the result of synthesis-dependent microhomology-mediated end joining (SD-MMEJ), a repair pathway linked to polymerase θ (PolQ). We also demonstrate that our workflow is compatible with a dual sgRNA approach in which a gene is targeted by two sgRNAs simultaneously. This paired nuclease method results in more reliable loss-of-function alleles that lack a large essential part of the gene. The ease of the CRISPR/Cas9 workflow should help in the eventual generation of true null alleles of every gene in the Arabidopsis genome, which will advance both basic and applied plant research.

This paper seeks to expand our appreciation of the gene editing tool, clustered regularly interspaced short palindromic repeats‐associated protein 9 (CRISPR‐Cas9), its function, its benefits and risks, and the challenges of regulating its use. I frame CRISPR's emergence and its current use in the context of 150 years of formal exploration of heredity and genetics. I describe CRISPR's structure and explain how it functions as a useful engineering tool. The contemporary international and domestic regulatory environment governing human genetic interventions is reviewed and shown to be increasingly ineffective in its ability to restrain, guide, and optimize the emerging use of CRISPR. Several reasons for this lack of consensus are discussed. In conclusion, I suggest a number of public policy recommendations that might allow us to simultaneously embrace our most important moral values and manage the inevitable power CRISPR will come to have in our lives. [ABSTRACT FROM AUTHOR]

This focus issue considers the normative implications of the recent emergence in genome editing technology known as CRISPR (clustered regularly interspaced short palindromic repeats) or CRISPR‐associated protein 9. Originally discovered in the adaptive immune systems of bacteria and archaea, CRISPR enables researchers to make efficient and site‐specific modifications to the genomes of cells and organisms. More accessible, precise, and economic than previous gene editing technologies, CRISPR holds the promise of not only transforming the fields of genetics, agriculture, and human medicine, but also heralding a new era of democratized biotechnology. However, the speed with which developments in the field have progressed threatens to overwhelm our normative sensibilities about the long‐term practical and ethical implications. The contributors to this focus issue attempt to think through some of the more salient moral and practical consequences of CRISPR in the context of religious ethics, particularly as they relate to themes of autonomy, human flourishing, social justice, and the ethics of enhancement. [ABSTRACT FROM AUTHOR]

CRISPR/Cas technology is a versatile tool for genome engineering in many organisms, including filamentous fungi. Cpf1 is a multi-domain protein of class 2 (type V) RNA-guided CRISPR/Cas endonuclease, and is an alternative platform with distinct features when compared to Cas9. However, application of this technology in filamentous fungi is limited. Here, we present a single CRISPR/Cpf1 plasmid system in Aspergillus aculeatus strain TBRC 277, an industrially relevant cell factory. We first evaluated the functionality of three Cpf1 orthologs from Acidaminococcus sp. BV3L6 (AsCpf1), Francisella tularensis subsp. novicida U112 (FnCpf1), and Lachnospiraceae bacterium (LbCpf1), in RNA-guided site-specific DNA cleavage at the pksP locus. FnCpf1 showed the highest editing efficiency (93 %) among the three Cpf1s. It was further investigated for its ability to delete a 1.7 kb and a 0.5 kb from pksP and pyr G genes, respectively, using two protospacers targeting these gene loci in a single crRNA array. Lastly, simultaneous editing of three sites within TBRC 277 genome was performed using three guide sequences targeting these two genes as well as an additional gene, kusA , which resulted in combined editing efficiency of 40 %. The editing of the NHEJ pathway by targeting kusA to generate a NHEJ-deficient strain of A. aculeatus TBRC 277 improved gene targeting efficiency and yielded more precise gene-editing than that of using wild-type strain. This promising genome-editing system can be used for strain improvement in industrial applications such as production of valuable bioproducts. [ABSTRACT FROM AUTHOR]

As a new genetic engineering technology, gene editing can precisely modify the specific gene sequence of the organism's genome. In the last 10 years, with the rapid development of gene editing technology, zinc-finger nucleases (ZFNs), transcription activator-like endonucleases (TALENs), and CRISPR/Cas9 systems have been applied to modify endogenous genes in organisms accurately. Now, gene editing technology has been used in mice, zebrafish, pigs, cattle, goats, sheep, rabbits, monkeys, and other species. Breeding for disease-resistance in agricultural animals tends to be a difficult task for traditional breeding, but gene editing technology has made this easier. In this work, we overview the development and application of gene editing technology in the resistance breeding of livestock. Also, we further discuss the prospects and outlooks of gene editing technology in disease-resistance breeding. [ABSTRACT FROM AUTHOR]

Background: Targeted knock-in assisted by the CRISPR/Cas9 system is an advanced technology with promising applications in various research fields including medical and agricultural sciences. However, improvements in the efficiency, precision, and specificity of targeted knock-in are prerequisites to facilitate the practical application of this technology. To improve the efficiency of targeted knock-in, it is necessary to have a molecular system that allows sensitive monitoring of targeted knock-in events with simple procedures. Methods and results: We developed an assay, named CD55 correction assay, with which to monitor CD55 gene correction accomplished by targeted knock-in. To create the reporter clones used in this assay, we initially introduced a 7.7-kb heterozygous deletion covering CD55 exons 2–5, and then incorporated a truncating mutation within exon 4 of the remaining CD55 allele in human cell lines. The resultant reporter clones that lost the CD55 protein on the cell membrane were next transfected with Cas9 constructs along with a donor plasmid carrying wild-type CD55 exon 4. The cells were subsequently stained with fluorescence-labeled CD55 antibody and analyzed by flow cytometry to detect CD55-positive cells. These procedures allow high-throughput, quantitative detection of targeted gene correction events occurring in an endogenous human gene. Conclusions: The current study demonstrated the utility of the CD55 correction assay to sensitively quantify the efficiency of targeted knock-in. When used with the PIGA correction assay, the CD55 correction assay will help accurately determine the efficiency of targeted knock-in, precluding possible experimental biases caused by cell line-specific and locus-specific factors. [ABSTRACT FROM AUTHOR]