Search

We integrate structural, geophysical, and geodetic studies showing that the Dinarides-Hellenides orogen along the Adria-Europe plate boundary in the Western Balkan peninsula has experienced clockwise oroclinal bending since Eocene-Oligocene time. Rotation of the Hellenic segment of this orogen has accelerated since the middle Miocene and is associated with a north-to-south increase in shortening along the orogenic front. Within the Paleogene nappe pile, bending was accommodated by orogen-parallel extension, clockwise block rotation, and thrusting in the hanging wall of the Skhoder-Peja Normal Fault (SPNF). The SPNF and related faults cut the older Skhoder-Peja Transfer Zone with its pre-Neogene dextral offset of the West Vardar ophiolite nappe. Rotation of the SPNF hanging wall involved Miocene-to-recent, out-of-sequence thrusting that was transferred to the Hellenic orogenic front via lateral ramps on dextral transfer zones. Along strike of the Dinarides-Hellenides and coincident with the southward increase in Neogene shortening, the depth of the Adriatic slab increases from ~160 km north of the SPNF to ~200 km just to the south thereof, to several hundreds of kilometers to the south of the Kefalonia Transfer Zone. The geodynamic driver of tectonics since the early Miocene has been enhanced rollback of the Hellenic segment of the Adriatic slab in the aftermath of Eocene-Oligocene slab tearing and breakoff beneath the Dinarides, which focused slab pull in the south. The SW-retreating Hellenic slab segment induced clockwise bending of the southern Dinarides and northern Hellenides, including their Adriatic foreland, about a rotation pole in the vicinity of the Mid-Adriatic Ridge.

In the frame of the AlpArray project we analyse teleseismic data from permanent and temporary stations of the Alpine region to study seismic discontinuities down to about 140 km depth. We average broadband teleseismic S-waveform data to retrieve S-to-P converted signals from below the seismic stations. In order to avoid processing artefacts, no deconvolution or filtering is applied, and S arrival times are used as reference for stacking. We show a number of north-south and east-west profiles through the Alpine area. The Moho signals are always seen very clearly, and negative velocity gradients below the Moho depth are also visible in a number of profiles. A Moho depression is visible along larger parts of the Alpine chain. It reaches its largest depth of 60 km beneath the Tauern Window. However, the Moho depression ends abruptly near about 13'E below the eastern Tauern Window. This Moho depression may represent the crustal trench, where the Eurasian lithosphere is subducted below the Adriatic lithosphere. East of 13'E an important along-strike change occurs; the image of the Moho changes completely. No Moho deepening is found in this easterly region; instead the Moho bends up along the contact between the European and the Adriatic lithosphere all the way to the Pannonian Basin. An important along-strike change was also detected in the upper mantle structure at about 14'E. There, the lateral disappearance of a zone of negative velocity gradient in the uppermost mantle indicates that the S-dipping European slab laterally terminates east of the Tauern Window in the axial zone of the Alps. The area east of about 13'E is known to have been affected by severe late-stage modifications of the structure of crust and uppermost mantle during the Miocene when the ALCAPA (Alpine, Carpathian, Pannonian) block was subject to E-directed lateral extrusion., Solid Earth, 12 (11), ISSN:1869-9510, ISSN:1869-9529

Based on recent results of AlpArray, we propose a new model of Alpine collision that involves subduction and detachment of thick (∼ 180 km) European lithosphere. Our approach combines teleseismic P-wave tomography and existing local earthquake tomography (LET), allowing us to image the Alpine slabs and their connections with the overlying orogenic lithosphere at an unprecedented resolution. The images call into question the conventional notion that downward-moving lithosphere and slabs comprise only seismically fast lithosphere. We propose that the European lithosphere is heterogeneous, locally containing layered positive and negative Vp anomalies of up to 5 %–6 %. We attribute this layered heterogeneity to seismic anisotropy and/or compositional differences inherited from the Variscan and pre-Variscan orogenic cycles rather than to thermal anomalies. The lithosphere–asthenosphere boundary (LAB) of the European Plate therefore lies below the conventionally defined seismological LAB. In contrast, the lithosphere of the Adriatic Plate is thinner and has a lower boundary approximately at the base of strong positive Vp anomalies at 100–120 km. Horizontal and vertical tomographic slices reveal that beneath the central and western Alps, the European slab dips steeply to the south and southeast and is only locally still attached to the Alpine lithosphere. However, in the eastern Alps and Carpathians, this slab is completely detached from the orogenic crust and dips steeply to the north to northeast. This along-strike change in attachment coincides with an abrupt decrease in Moho depth below the Tauern Window, the Moho being underlain by a pronounced negative Vp anomaly that reaches eastward into the Pannonian Basin area. This negative Vp anomaly is interpreted as representing hot upwelling asthenosphere that heated the overlying crust, allowing it to accommodate Neogene orogen-parallel lateral extrusion and thinning of the ALCAPA tectonic unit (upper plate crustal edifice of Alps and Carpathians) to the east. A European origin of the northward-dipping, detached slab segment beneath the eastern Alps is likely since its down-dip length matches estimated Tertiary shortening in the eastern Alps accommodated by originally south-dipping subduction of European lithosphere. A slab anomaly beneath the Dinarides is of Adriatic origin and dips to the northeast. There is no evidence that this slab dips beneath the Alps. The slab anomaly beneath the Northern Apennines, also of Adriatic origin, hangs subvertically and is detached from the Apenninic orogenic crust and foreland. Except for its northernmost segment where it locally overlies the southern end of the European slab of the Alps, this slab is clearly separated from the latter by a broad zone of low Vp velocities located south of the Alpine slab beneath the Po Basin. Considered as a whole, the slabs of the Alpine chain are interpreted as highly attenuated, largely detached sheets of continental margin and Alpine Tethyan oceanic lithosphere that locally reach down to a slab graveyard in the mantle transition zone (MTZ)., Solid Earth, 12 (11), ISSN:1869-9510, ISSN:1869-9529

We present a map that correlates tectonic units between Alps and western Turkey accompanied by a text providing access to literature data, explaining the concepts used for defining the mapped tectonic units, and first-order paleogeographic inferences. Along-strike similarities and differences of the Alpine-Eastern Mediterranean orogenic system are discussed. The map allows (1) for superimposing additional information, such as e.g., post-tectonic sedimentary basins, manifestations of magmatic activity, onto a coherent tectonic framework and (2) for outlining the major features of the Alpine-Eastern Mediterranean orogen. Dinarides-Hellenides, Anatolides and Taurides are orogens of opposite subduction polarity and direction of major transport with respect to Alps and Carpathians, and polarity switches across the Mid-Hungarian fault zone. The Dinarides-Hellenides-Taurides (and Apennines) consist of nappes detached from the Greater Adriatic continental margin during Cretaceous and Cenozoic orogeny. Internal units form composite nappes that passively carry ophiolites obducted in the latest Jurassic–earliest Cretaceous or during the Late Cretaceous on top of the Greater Adriatic margin successions. The ophiolites on top of composite nappes do not represent oceanic sutures zones, but root in the suture zones of Neotethys that formed after obduction. Suturing between Greater Adria and the northern and eastern Neotethys margin occupied by the Tisza and Dacia mega-units and the Pontides occurred in the latest Cretaceous along the Sava-Izmir-Ankara-Erzincan suture zones. The Rhodopian orogen is interpreted as a deep-crustal nappe stack formed in tandem with the Carpatho-Balkanides fold-thrust belt, now exposed in a giant core complex exhumed in late Eocene to Miocene times from below the Carpatho-Balkan orogen and the Circum-Rhodope unit. Its tectonic position is similar to that of the Sakarya unit of the Pontides. We infer that the Rhodope nappe stack formed due to north-directed thrusting. Both Rhodopes and Pontides are suspected to preserve the westernmost relics of the suture zone of Paleotethys.

Central Anatolia exposes previously buried and metamorphosed, continent-derived rocks – the Kirsehir and Afyon zones – now covering an area of ∼300 × 400 km. So far, the exhumation history of these rocks has been poorly constrained. We show for the first time that the major, >120 km long, top-NE ‘Ivriz’ Detachment controlled the exhumation of the HP/LT metamorphic Afyon Zone in southern Central Anatolia. We date its activity at between the latest Cretaceous and early Eocene times. Combined with previously documented isolated extensional detachments found in the Kirsehir Block, our results suggest that a major province governed by extensional exhumation was active throughout Central Anatolia between ∼80 and ∼48 Ma. Although similar in dimension to the Aegean extensional province to the east, the Central Anatolian extensional province is considerably older and was controlled by a different extension direction. From this, we infer that the African slab(s) that subducted below Anatolia must have rolled back relative to the Aegean slab since at least the latest Cretaceous, suggesting that these regions were underlain by a segmented slab. Whether or not these early segments already corresponded to the modern Aegean, Antalya, and Cyprus slab segments remains open for debate, but slab segmentation must have occurred much earlier than previously thought.

The construction of five crustal-scale profiles across the Western Alps and the Ivrea mantle wedge integrates up-to-date geological and geophysical information and reveals important along strike changes in the overall structure of the crust of the Western Alpine arc. Tectonic analysis of the profiles, together with a review of the existing literature allows for proposing the following multistage evolution of the arc of the Western Alps: (1) exhumation of the mantle beneath the Ivrea Zone to shallow crustal depths during Mesozoic is a prerequisite for the formation of a strong Ivrea mantle wedge whose strength exceeds that of surrounding mostly quartz-bearing units, and consequently allows for indentation of the Ivrea mantle wedge and eastward back-thrusting of the western Alps during Alpine orogeny. (2) A first early stage (pre-35 Ma) of the West-Alpine orogenic evolution is characterized by top-NNW thrusting in sinistral transpression causing at least some 260 km displacement of internal Western Alps and E-W-striking Alps farther east, together with the Adria micro-plate, towards N to NNW with respect to stable Europe. (3) The second stage (35–25 Ma), further accentuating the arc, is associated with top-WNW thrusting in the external zones of the central portion of the arc and is related to the lateral indentation of the Ivrea mantle slice towards WNW by some 100–150 km. (4) The final stage of arc formation (25–0 Ma) is associated with orogeny in the Apennines leading to oroclinal bending in the southernmost Western Alps in connection with the 50° counterclockwise rotation of the Corsica-Sardinia block and the Ligurian Alps. Analysis of existing literature data on the Alps–Apennines transition zone reveals that substantial parts of the Northern Apennines formerly suffered Alpine-type shortening associated with an E-dipping Alpine subduction zone and were backthrusted to the NE during Apenninic orogeny that commences in the Oligocene.