Search

Extensive organic-matter (OM) rich facies (black shales) occur in the Ordo-Silurian boundary successions in the Yangtze area, South China. To investigate the redox changes of the Yangtze Sea during the Ordo-Silurian transition, two OM sections (Wangjiawan in Yichang, Hubei Province, and Sanjiaguan in Zhangjiajie, Hunan Province) straddling the Ordo-Silurian boundary are studied. The measurements finished in this study include contents of the total organic carbon (TOC), pyrite sulphur, and different species of Fe, including dithionite-extractable Fe (FeD), pyrite Fe (FeP), HCI-extractable Fe (FeH), and total Fe (FeT), in black shales, as well as other redox proxies, such as the S/C ratio, the ratio between highly reactive Fe (FeHR = FeD + FeP) and FeT, and the Fep/(FeP + FeH) ratio, known as the degree of pyritization (DOP). In the Wangjiawan section, the Middle Ashgill sediments have high FeHR/FeT ratios (0.20-0.77; avg. 0.45), high DOP values (0.21-0.72; avg. 0.54), and a relatively constant sulfur content independent of the organic carbon content. By the contrast, the mid-early Hirnantian deposits generally have low FeHR/FeT ratios (0.10-0.35; avg. 0.21), low DOP values (0.11-0.40; avg. 0.28), and S/C values are clustering on the normal marine value (S/C = 0.36). The late Hirnantian and early Rhuddanian deposits, similar to those of the Middle Ashgill deposits, are characterized by high FeHR/FeT ratios (0.32-0.49; avg. 0.41), high DOP values (0.46-0.68; avg. 0.53) and fairly constant sulfur contents. These data suggest the occurrences of marine anoxia on the Yangtze Sea shelf during intervals of the Mid Ashgill, Late Hirnantian and Early Rhuddanian, and ventilated and oxygenated marine conditions during the mid-early Hirnantian time. The mid-early Hirnantian ventilated event was concomitant with the global glacial period, likely resulted from the glacio-eustatic sea-level fall and subsequent circulation of cold, dense oxygenated waters upon the shelf seabed. Accordingly, the abrupt change from oxygenated to anoxic marine waters from the late Hirnantian and the early Rhuddanian were resulted from the post-glacial rise of eustatic sea level. Combined with the data from Sanjiaguan section near the subemergent highland, salinity stratification of water columns are strongly evidenced by very low S/C ratios (0.00-0.08, avg. 0.02), low FeHR/FeT ratios (0.10-0.37, avg. 0.27), low DOP values (0.01-0.27, avg. 0.10), and TOC contents (0.72%-4.27%, avg. 2.55%). Under this circumstance, the anoxic water columns could have formed beneath the halocline, above which desalinized waters formed. In the Wangjiawan section, TOC contents are generally high (0.94-9.32%, avg. 4.44%), but low (0.35%-2.12%, avg. 1.29%) in the mid-early Hirnantian that is coincident with the oceanic oxic stage, together with relation of the organic contents to the stratal thickness, suggesting that the accumulation of the organic matter was mainly controlled by the oxygen levels of the water columns; on the other hand, productivity and depositional rate may also have played a role in the organic accumulation and preservation.

Exhumation of deeply buried ultrahigh-pressure (UHP) terranes remains a puzzle in understanding lithospheric dynamic process. New evidence that constrains the exhumation process of the Dabie UHP terrane includes the following. (1) Structural data record the architecture of the Dabie UHP terrane. Three slices are recognized—i.e., from top to bottom, the Susong blueschist slice, the Huangzhen-Huangweihe (HH) HP slice, and the Jinheqiao-Shuanghe-Bixiling (JSB) UHP slice. These slices have been stacked and domed. (2) Geophysical data depict two offsets in the Moho. Offset-I separates the Dabie UHP terrane from the North China craton, and has served as a subduction channel, as well as an exhumation channel. Offset-II, separating the Dabie UHP terrane from the foreland belt, developed due to geodynamic regime reorganization. (3) Geochronological data reveal that the HP slice was exhumed earlier that the UHP slice. A northward-younging exhumation polarity is implied, with younger exhumation age closer to the exh...

Critical but controversial problems in the study of UHP metamorphic rocks from the Dabie-Sulu region include: (1) the possible existence of ophiolitic melange; (2) the “in situ” versus “foreign” origin of UHP eclogites and their enclosing gneisses; (3) the possible presence and role of fluids during ultrahigh-pressure (UHP) recrystallization; (4) the timing of collision between the Yangtze and Sino-Korean continental blocks; (5) the polarity of syncollisional subduction; and (6) a single-versus multistage exhumation scenario for the UHP rocks. These questions are discussed in light of new geological, geochemical, and isotopic constraints. Our conclusions for the Dabie-Sulu belt are as follows: (1) Mafic-ultramafic blocks are of two distinct origins: one group samples lithosphere of the suprasubductionzone mantle wedge, whereas the second group represents postcollisional magmatic intrusions. Neither lithologic group represents true oceanic crust. (2) Quartzofeldspathic gneisses enveloping the eclogites are...

Geological, geophysical and geochemical data show that both of the Dabie Orogen and Hefei Basin formed during a Mesozoic orogeny. A three-stage development of the Hefei Basin includes down-warping, half grabben, and positive inversion. Both the uplift in orogen and the depression in basin resulted from the “de-rooting” of orogen and up-welling of the mantle.

The top boundary of the ultra-high pressure metamorphic (UHPM) rocks in the Dabie Mountains, central China, has been mapped. The results show that the top boundary of the UHPM rocks is occupied by flat-lying felsic gneiss, on which tonalitic gneiss rests. Petrological and mineralogical evidence indicates a wide P-T gap across the boundary with an estimated peak metamorphic P-T value of the UHPM rocks being >30 kbar and 800 ± 50°C, and that of the tonalitic gneiss around 11 kbar and 800°C. Their P-T-t paths are different. The former has a clockwise path and the latter is counterclockwise. This implies that the UHPM rocks at the bottom and the tonalitic gneiss on top have been structurally juxtaposed together. The top boundary, i.e. the contact between the UHPM rocks and tonalitic gneiss, shows characteristics of a ductile shear zone. Microscopically, feldspar and quartz in the shear zone are characterized by ductile deformation. In larger scale, the top boundary is undulating. Shear sense in the top boundary is a two-way direction. Only the latest shear sense measured with c -axes of quartz show a consistent direction of top-to-the-north. The study provides some constraints to the exhumation process of the Dabie UHPM rocks.

Four main faults outline the metamorphic terrain in the Dabie Mountains, central China. The difference of metamorphic grade in the northern, central and southern parts is well-established. This study suggests that these metamorphic rocks belong to three individual geological-tectonic units, which are the northern Andean-type magmatic arc, the central UHPM rock-bearing melange zone and the mobilized sedimentary cover and basement of Yangtze southern continental margin. An old ductile sheared zone through Wuhe and the south of Yuexi-Shuihou divides the Dabie metamorphic complex into northern and central units. The northern unit is predominantly occupied by tonalitic-trondhjemitic grey gneisses and amphibolites facies metasediments. Several approximately E-W-trending ductile-sheared mylonitic belts cut through the grey gneisses, and are especially developed in the northern and southern margins of the unit (high-strain zones). There is a series of lenses of basic granulites, serpentinites and Grt-pyroxenites in the high-strain zones. They do not have the petrological and geochemical characteristics of ophiolitic rocks. However, they may represent the root of an arc combined with grey gneisses. Our study also demonstrates that all rocks from the northern block did not undergo eclogite facies metamorphism. Mesozoic post-collisional granites occur extensively in the Dabie terrain, especially in the northern unit. Coesite and diamond-bearing eclogites in the central unit indicate a regional ultra-high-pressure metamorphism of pressures of > 30 kbar and temperature of 600–800°C. Except for eclogites, various ultra-high-pressure metamorphic (UHPM) rocks include ultramafic rocks, marbles and other metamorphosed sedimentary rocks. They, as large-scale blocks, are mixed with lower P-T encompassing host rock orthogneisses. The central block is a UHPM rock-bearing melange zone. The south block is a metasedimentary sequence of continental margin of the Yangtze plate. The boundary between the central and southern blocks is located in the north from Huangzhen, extending eastwards through the dam of Huangliangting reservoir. In addition, the Foziling Group, north of the Dabieshan terrain was possibly deposited in an extensional basin on an extensional shear zone, comparable to the basin in the Variscan of France and the Caledonides of S. Norway (Dewey, Ryan and Anderson, Geological Society Special Publication No. 76, pp. 325–343, 1993). The authors hope that this information will provide more valid evidence of regional tectonic evolution.

The northern Dabieshan metamorphic terrain (NDT) is an analogue of an Andean-type magmatic arc. The predominant rock type is a trondhjemitic-tonalitic-granodioritic (TTG) gneiss with bodies of meta...

Based on petrological, structural, geological and geochronological research, the authors summarize the progress of ultra-high pressure (UHP) metamorphic rock study since 1989 by Chinese geoscientists and foreign geoscientists in the Dabie-Su-Lu region. The authors introduce and discuss a two-stage exhumation process for the UHP metamorphic rocks that have various lithologies; eclogite, ultramafics, jadeitic quartzite, gneiss, schist and marble. The metamorphic history of UHP metamorphic rocks is divided into three stages, that is, the pre-eclogite stage, coesite eclogite stage, and retrograde stage. Prior to UHP metamorphism, the ultramafics had a high temperature environment assemblage of mantle and others had blueschist facies assemblages. The granulite facies assemblages, which have recorded a temperature increase event with decompression, have developed locally in the Weihai basaltic rocks. Isotopic ages show a long range from > 700 Ma to 200 Ma. The diversity in protoliths of UHP metamorphic rocks may be related to the variation of isotopic ages older than 400 Ma. The Sm-Nd dating of ~ 220 Ma could reflect the initial exhumation stage after the peak UHP metamorphism in relation to the collision between the Sino-Korean and Yangtze blocks and subsequent events. Petrological and structural evidence imply a two-stage exhumation process. During the initial exhumation, the UHP metamorphic rocks were sheared and squeezed up in a high P/T regime. In the second exhumation stage the UHP metamorphic rocks were uplifted and eventually exposed with middle crustal rocks.

Coesite in a granulite host-rock is reported from Weihai City, northeastern Shandong Province, China. Coesite occurs as inclusions in garnet, which is separated from the fine-grained matrix of quartz + clinopyroxene + homblende by a zoned corona of plagioclase + clinopyroxene + orthopyroxene + hornblende. Petrological evidence shows that the coesite-bearing granulite is retrograded from eclogite. Three stages in the metamorphic history of the granulite have been recognized. (i) Coesite-eclogite stage: The assemblage reconstructed from the inclusions in garnet is Mg-rich garnet + omphacite + coesite + rutile. (ii) During the granulite stage, these minerals reacted to form quartz + clinopyroxene + hornblende (in the matrix), clinopyroxene + albite (omphacite pseudomorphs) and plagioclase + clinopyroxene + orthopyroxene + hornblende (as corona around garnet). (iii) Amphibolite stage: Earlier minerals were replaced by biotite, epidote and hornblende. The P-T conditions estimated with various geothermobarometers show a T-increasing and P-decreasing path from the eclogite stage (T ∼ 720°C, P > 28 kbar) to the granulite stage (T ∼ 850°C, P ∼ 10 kbar). Thus the exhumation of the ultra-high-pressure rocks in Weihai proceeded under increasing temperature, and may not have been as fast as it was thought before

The distributive characteristics of turbulence, turbulent velocity, turbulent intensity and Reynolds stress, in horizontal and vertical direction on leeward side of windbreak were discussed in this paper. The results show that all the three kinds of parameters of turbulence have the similar distributive patterns in lee, their peaks were around 10H for horizontal andZ/ H = 1 for vertical. The windbreak is important barrier to affect the structure and distribution of wind speed and turbulence. Porosities of windbreaks could alter the patterns of turbulence, therefore, affect the abilities and functions of windbreaks.

Most of petroliferous sedimentary basins in China have experienced multiple phases of tectonic evolution and deposition, and are characterized by tectonic and depositional superimposition. The term “superimposed basin” is suggested to describe those basins which consist of two or more simple prototype basins superimposing vertically and/or coalescing laterally. The characteristics of petroliferous superimposed basins are “multiple stages of basin forming and reworking, multiple layers of source rocks, multiple periods of hydrocarbon generation and expulsion, multiple periods of petroleum migration-accumulation-escape”. Therefore, applying the wave process analysis method to studying the process of basin formation, hydrocarbon generation, and reservoir formation, and then establishing theory of “petroleum accumulation system” is helpful to enhancing petroleum exploration efficiency in superimposed basins. This paper will, based on case study in the Tarim basin, report the major developments in studying basin formation, hydrocarbon generation and petroleum accumulation. In study of basin formation, (1) geophysical comprehensive profiles reveal that the Tarim plate has been subducted beneath the Tianshan orogenic belt with an interfinger structure and that the deep structure in the eastern section of the Tianshan orogenic belt is different from that in the western section. (2) The vertical variation in debris and geochemical composition reveals the nature and Mesozoic-Cenozoic evolution history of the Kuqa Depression. (3) Field investigation and paleostress reconstruction show that the Kuqa Depression has undergone gravity-driven extension in sedimentary cover when the Tianshan uplifted vertically. In hydrocarbon generation study, new developments include (1) setting environmental index to judge high grade source rocks in marine carbonates, and (2) establishing the lower limit of the organic carbon content for effective carbonate source rocks. In petroleum accumulation study, (1) methods of determining paleopressure and paleotemperature of forming fluid inclusions have been established. (2) The petroleum source analysis has indicated that the crude oil in the Lunnan and Tahe oilfields are derived from the source rocks of the Middle and Upper Ordovician. (3) Three generations of oil inclusions from the Lunnan oilfield have been recognized and dated.

We use the Pg seismic phase along the Korla-Jimsar profile across the Tianshan orogen and the 3D finite difference method to inverse the velocity structure of the upper crust beneath the basement of this mountain. Based on the velocity structure, the Korla-Jimsar profile can be divided into three parts, i.e. the north edge of the Tarim basin, the Tianshan orogen, and the south margin of the Junggar basin. Within the Tianshan there is a pattern of four convexities and three concavities, which correspond to the southern Tianshan, the Yanqi basin, the middle Tianshan, the Turpan basin, and the Bogda Mountains. In the north edge of the Tarim basin, the basement is about 10km deep with small lateral variations of velocity. In the Tianshan the velocity varies greatly laterally. The basement depth of the Yanqi basin is 6 km, which becomes shallow rapidly northward, and almost to the surface at the middle Tianshan. South to Kumux there is a small intermountain basin, where the maximum basement depth is 3 km, and also turns very shallow near Kumux. The Luntai fault, which bounds the Tarim basin and Tianshan, has vertical dislocation of about 5 km. The Turpan basin is covered with so thick a sediment that its basement is 7 km deep. The boundary fault between the Tianshan and Turpan is the Bolohoro fault which is characterized by quick deepening basement and 7 km vertical dislocation. In the Junggar basin the basement is 8 km deep. On the Korla-Jimsar profile, the velocity distribution of the upper crust and the structure are featured by NS symmetry on both sides of the axis of the Middle Tianshan, consistent with the deep structure revealed by this profile. It means that the Tarim basin and the Junggar basin underthrust toward the Tianshan from south and north, respectively. Such a structural style is different from that of another profile, i.e. the Xayar-Burjing profile, suggesting that there may be an important tectonic boundary between these two profiles.