Search

We investigate a large geodetic data set of interferometric synthetic aperture radar (InSAR) and GPS measurements to determine the source parameters for the three main shocks of the 2016 Central Italy earthquake sequence on 24 August and 26 and 30 October (M-w 6.1, 5.9, and 6.5, respectively). Our preferred model is consistent with the activation of four main coseismic asperities belonging to the SW dipping normal fault system associated with the Mount Gorzano-Mount VettoreMount Bove alignment. Additional slip, equivalent to a Mw similar to 6.1-6.2 earthquake, on a secondary (1) NE dipping antithetic fault and/or (2) on a WNW dipping low-angle fault in the hanging wall of the main system is required to better reproduce the complex deformation pattern associated with the greatest seismic event (the Mw 6.5 earthquake). The recognition of ancillary faults involved in the sequence suggests a complex interaction in the activated crustal volume between the main normal faults and the secondary structures and a partitioning of strain release.

This paper focuses on the boundary area between the Central and Southern Apennines thrust belt of the Italian peninsula, which separates two different patterns of distribution of active faults and strong earthquakes along the Apennines chain. In order to reduce the remarkable lack of data on this area, part of this boundary has been investigated. The study area corresponds to the surroundings of the town of Isernia, an important centre of the Molise region, and contains the Carpino and Le Piane (CLP) intermountain Basins of Quaternary age. The research was based on unpublished data, consisting of 65 well logs drilled in the CLP Basins, integrated with detailed field surveys (scale 1:10,000), mesoscale structural analysis and aerial photograph interpretation. This study allowed to define the geometry and kinematics of the CLP Basins. They result to be asymmetric halfgrabens partially filled with fluvio-lacustrine deposits, where the sedimentation is controlled by the activity of a set of normal faults striking N30jW and NE dipping. This set of faults, which developed mainly during the Late Pleistocene–Holocene, is about 10 km long and is located close to the northwestern end of the Boiano Basin extensional Fault System. The average slip rate calculated for part of the Holocene for one of the recognised faults ranges from 0.75 to 1.00 mm/year. The identification of the active CLP Basins Fault System partially fills the gap of data at the boundary between the Central and Southern Apennines. From a more general point of view, we hypothesise that this boundary might be regarded as a ‘‘persistent segment boundary’’, forming a long-term barrier to the propagation of rupture of active fault systems. Under this perspective, a redefinition of the seismic zonation of Italy for the study area is suggested. D 2002 Elsevier Science B.V. All rights reserved.

A comprehensive comparison among the three strongest earthquakes occurred in Italy in the past 30 years is presented. These three earthquakes struck the regions of Umbria and Marche in 1997, Abruzzo in 2009, and Emilia-Romagna, Lombardia and Veneto in 2012, respectively. They were assigned exactly the same local magnitude, Ml5.9, and comparable focal depths. In spite of having occurred in the same country, these earthquakes displayed considerable differences from both the scientific and the civil protection points of view. Differences can be ascribed to the released energy, the seismotectonic and geomorphological features, as well as the diverse population density, building features and socio-economic conditions that characterize the three epicentral areas. Nevertheless, the overall economic losses come out to be almost the same, although deriving from quite diverse distributions among the different categories of costs. Differences and similarities among the three events are carefully analysed and discussed in the paper. © 2015, Springer Science+Business Media Dordrecht.

Combined structural and geophysical investigations were carried out in the Matese Massif at the boundary between the Central and the Southern Apennines. The aim of this research was to define the structural geometry and the kinematics of Neogene deformation in order to validate the applicability of either thin-skinned or thick-skinned compressive styles in the Apennines of Italy. On the basis of two surface N–S cross-sections, integrated with recently acquired magnetotelluric data, the Matese structure appears as a single thrust sheet limited at the bottom by a low-angle thrust fault with sense-of-displacement towards the North. The structure was later deformed by footwall thrusts carrying Molise–Sannio Pelagic Basin Units and Apulian Carbonate Platform Units. The structure of the Matese Massif is composed mainly of Mesozoic carbonates of inner platform to by-pass and slope facies, separated within the thrust sheet by high-angle faults with low reverse horizontal displacement. These faults acted as normal faults in the Mesozoic and Cenozoic and controlled the carbonate facies distribution. During Neogene compression, these structures were tilted and then truncated by the basal short-cut thrust fault that cut from pre-Triassic units to Jurassic dolostone towards the foreland. Finally, Quaternary extensional tectonics dissected the whole structure with fault-related displacement values of up to 1000 m. This resulted in the present-day structural setting of the Matese Massif as a horst bounded to the SW and NE by fault-controlled basins, filled with continental deposits. This revised structural scenario is discussed within the framework of the structural style of external zones of the Apennines.

The Abruzzi–Molise sector in the Central Apennines is a part of a fold and thrust belt that has been deforming since the Late Cretaceous as a result of collision tectonics between the European and Adriatic plates. The superposition of different deformational styles highly reworked the originally complex palaeogeography of this portion of the southern Tethyan margin. Analogue modelling has been performed on thrusting mechanisms in the Abruzzi–Molise area in order to (1) reduce the number of admissible hypotheses regarding palaeogeographic setting, and (2) define thrusting mechanics. Both of these goals are crucial for hydrocarbon exploration purposes. The sandbox apparatus used to simulate the undeformed passive margin consisted of a thin compartment juxtaposed against a thick one along a linear boundary having variable geometries and mechanical stratigraphy; a rigid but mobile backstop was used to deform the stratigraphy in a Coulomb thrust wedge. Results from six experiments show that the geometric relationships between different structural units depend on the distribution of palaeogeographic domains. These domains are defined by mechanical and/or geometrical parameters, such as the orientation between the maximum compression direction and the palaeogeographic boundary, the mechanical stratigraphy and the thickness of the successions reproduced in the models. The present-day tectonic styles and Meso–Cenozoic palaeogeography of the Abruzzi–Molise area are discussed in terms of the mechanisms and structures analysed through the models.

The Adriatic foreland of the Apennines comes ashore only in Apulia (easternmost Italy). Its southern part, our study area, lacks any structural analysis devoted to define its recent-to-active tectonics. Throughout the Quaternary, this region was affected by mild brittle deformation with rare faults, characterized by small displacement, and widespread extension joints, frequently organized in sets. Therefore, we conducted a quantitative and systematic analysis of the joint sets affecting Quaternary deposits, by applying an inversion technique ad hoc to infer the orientation and ratio of the principal stress axes, R = (σ2 − σ3)/(σ1 − σ3). Within a general extensional regime, we recognized three deformational events of regional significance. The oldest event, constrained to the early and middle part of the Middle Pleistocene, is characterized by variable direction of extension and R between 0.64 and 0.99. The penultimate event, dated late Middle Pleistocene, is characterized by an almost uniaxial tension, with a horizontal σ3 striking ∼N43°E; R is high, between 0.85 and 0.99. The most recent event is characterized by the lowermost R values, that never exceed 0.47 and are frequently

An integration of seismological data with geological and geomorphological information aided by seismic interpretation was performed to characterise the Quaternary tectonic evolution of the Metauro River basin area (northern Marche) and adjacent off-shore sector of the external Northern Apennines. On-shore, along the Adriatic coast, the youngest age of thrusting and folding post-dates the Early-Middle Pliocene, while Pleistocene deposits appear to be, at least in part, not involved in the deformation. Recent (i.e. post-thrusting) tectonic structures have been recognised both in pre-Quaternary substratum rocks and in Upper Quaternary continental deposits (Upper Pleistocene terrace alluvium, Upper Pleistocene–Holocene slope deposits). These faults are all compatible with a WSW–ENE oriented extension. In the Metauro River basin area, preserved flights of stream terraces have been categorised according to the presence or absence of alluvial suites in relationship to each terrace level. Here, based on both the heights above the valley floor and the areal distribution of stream terraces, a generalised vertical tectonic uplift can be inferred, particularly during the Middle–Late Pleistocene. Moreover, the along-valley distribution of stream terraces provides further constraints on the age of thrusting and folding. In fact, the reconstructed terrace-levels are substantially parallel, and no evidence for any significant deformation by fold activity has been recognised. Local deformation displayed by both terrace surfaces and alluvial/slope-waste deposits suggests, instead, the intervening of some minor differential movements associated with the generalised uplift and/or to Middle–Late Pleistocene normal faulting. Their occurrence appears anyhow to be unrelated with the pattern of folds and associated thrusts. The present-day seismic activity of the study area was considered by analysing 83 seismic events that occurred from 1987 to 2000. The epicentre distribution is very scattered, and depths are generally comprised within the first 20 km of the crust, clustering between 0 and 15 km. Most of the events have magnitude

The active geodynamic setting of the Northern Apennines is characterised by extension in the axial zone of the chain, and by a more complex tectonic behaviour in the frontal part of the belt. In the latter sector, moderate seismicity occurs, displaying compressional, strike-slip and extensional focal plane solutions with variably oriented P and T axes. For this area, a review of available geological and geophysical data has been integrated by the analysis of seismic reflection lines calibrated with deep well logs. This study confirms that, as already suggested by some previous workers, thrusting and related folding in the study area ceased in Early Pleistocene times. This feature is in contrast with the hypothesis of active thrusting related to a subducting lithospheric slab beneath the chain—an issue which is largely debated based on available geophysical information. Our analysis shows that the Northern Apennines are characterised by an active tectonic setting which is similar to that of the central and southern portions of the belt. These areas all display a Late Quaternary inactivity of the thrust front. NE–SW oriented extension (perpendicular to the strike of the orogen) is well established in their axial zones, whereas a less homogeneous stress field characterises their external sectors and the adjacent foreland. Within this framework, the seismotectonic behaviour of the Northern Apennines—and probably of the whole Italian peninsula between the Po Plain and the Southern Apennines (north of the Calabrian Arc)—may be interpreted as essentially controlled by two main processes. The first of them involves tectonic uplift, possibly related with slab detachment and associated unbending of the foreland plate. The second process consists of a present-day northwestward motion of the Adria block with respect to stable Europe.