Search

The signal-in-space (SIS) anomalies caused by satellites and control segments can greatly affect the reliability and safety of navigation and positioning users. The prior information associated with the failure of the Advanced Receiver Autonomous Integrity Monitoring (ARAIM) algorithm were obtained by the evaluation of SIS failure rates broadcasted with navigation ephemeris to investigate the integrity of navigation and positioning. For the existing ARAIM algorithm, the failure rate of satellites in the BeiDou Navigation Satellite System (BDS) is a conservative estimate, which is inconsistent with the actual SIS performance of BDS. Only the accurate detection of the SIS anomalies of BDS satellites can provide an effective reference to associate with failure. Therefore, to improve the accuracy of SIS anomaly detection for BDS satellites, and to provide higher integrity services for users, this study presents an improved method of SIS anomaly detection with precise ephemeris. The median method was used to detect a gross error in clock data before the calculation of clock datum, and the combination of an experience threshold and trimmed mean was used to determine the anomaly detection threshold. The feasibility and efficiency of the proposed method were also analyzed using data collected between 2015 and 2016. The detection results show that the constellation fault caused by erroneous clock data can be avoided, and the SIS anomalies can also be detected using the proposed method. Additionally, through the comprehensive tests performed in this study, it was found that from 2015 to 2016, the average accumulated duration of anomalies for BDS satellites was 10 h for geostationary orbit (GEO) and incline geosynchronous orbit (IGSO) and 55 h for medium earth orbit (MEO), respectively. These anomalies were primarily caused by the satellite clock. [ABSTRACT FROM AUTHOR]

The orbital maneuvers of the global navigation satellite system (GNSSs) have a significant influence on the performance of the precise positioning, navigation, and timing (PNT) services. Because the Chinese BeiDou Navigation Satellite System (BDS) has three types of satellites in the geostationary orbit (GEO), inclined geosynchronous orbit (IGSO), and medium earth orbit (MEO) maneuvers occur more frequently. Thus, it is essential to determine an effective approach for the detection of orbital maneuvers. This study proposes a method for the detection of orbital maneuvers using epoch-differenced carrier phase observations and broadcast ephemeris data. When using the epoch-differenced velocity estimation as a basic data solution model, the time discrimination and satellite identification factors are defined and used for the real-time detection of the beginning and the pseudorandom noise code (PRN) of satellites. The datasets from four GNSS stations (WUH1, BJF1, POHN, CUT0) from the year 2016 were collected and analyzed. The validations showed that the beginning, the PRN of the orbital maneuver of the satellite can be precisely detected in real time for all GEO, IGSO, and MEO satellites, and the detected results also showed good consistency, with the beginning time at a difference of 1–2 min across different stations. The proposed approach was observed to be more sensitive, and the detected beginning time was about 30 min earlier than the single point positioning approach when the high-precision carrier phase observation was used. Thus, orbital maneuvering can be accurately detected by the proposed method. It not only improves the utilization of the collected data but also improves the performance of PNT services. [ABSTRACT FROM AUTHOR]

The BeiDou navigation satellite system (BDS) comprises geostationary earth orbit (GEO) satellites as well as inclined geosynchronous orbit (IGSO) and medium earth orbit (MEO) satellites. Owing to their special orbital characteristics, GEO satellites require frequent orbital maneuvers to ensure that they operate in a specific orbital window. The availability of the entire system is affected during the maneuver period because service cannot be provided before the ephemeris is restored. In this study, based on the conventional dynamic orbit determination method for navigation satellites, multiple sets of instantaneous velocity pulses parameters which belong to one of pseudo-stochastic parameters were used to simulate the orbital maneuver process in the orbital maneuver arc and establish the observed and predicted orbits of the maneuvered and non-maneuvered satellites of BeiDou regional navigation satellite system (BDS-2) and BeiDou global navigation satellite system (BDS-3). Finally, the single point positioning (SPP) technology was used to verify the accuracy of the observed and predicted orbits. The orbit determination accuracy of maneuvered satellites can be greatly improved by using the orbit determination method proposed in this paper. The overlapping orbit determination accuracy of maneuvered GEO satellites of BDS-2 and BDS-3 can improve 2–3 orders of magnitude. Among them, the radial orbit determination accuracy of each maneuvered satellite is basically better than 1 m. simultaneously, the combined orbit determination of the maneuvered and non-maneuvered satellites does not have a great impact on the orbit determination accuracy of the non-maneuvered satellites. Compared with the multi GNSS products (indicated by GBM) from the German Research Centre for Geosciences (GFZ), the impact of adding the maneuvered satellites on the orbit determination accuracy of BDS-2 satellites is less than 9 %. Furthermore, the orbital recovery time and the service availability period are significantly improved. When the node of the predicted orbit is traversed approximately 3 h after the maneuver, the accuracy of the predicted orbit of the maneuvered satellite can reach that of the observed orbit. The SPP results for the BDS reached a normal level when the node of the predicted orbit was 2 h after the maneuver. [ABSTRACT FROM AUTHOR]

In order to analyse the contribution of inter-satellite ranging observation to the BeiDou regional navigation satellite system (BDS-2) satellite orbit determination under the condition of regional ground tracking stations, first, the methods of using the observation model, the dynamic parameters dilution of precision (DPDOP), and the satellite position dilution of precision (SPDOP) to describe the contribution of inter-satellite ranging observation to orbit determination accuracy are proposed. Then, based on the measured observation data of the regional ground tracking stations located in China, as well as simulated inter-satellite ranging observation data, the contribution of inter-satellite ranging observation to orbit determination accuracy for the three types of satellites used by BDS-2 is analysed. The results show that the inter-satellite ranging observation improves the solution strength of the dynamic parameters by adding redundant observations without adding new parameters to be estimated, which effectively improves the orbit determination accuracy of the along-track component of Geostationary Earth Orbit (GEO) satellite and the cross-track and radial components of Inclined Geosynchronous Orbit (IGSO) and Medium Earth Orbit (MEO) satellites. In addition, under the condition of the regional tracking stations, the inter-satellite ranging observation compensates for the disadvantage that the satellite cannot be tracked by the whole arc segment. The accuracy and continuous stability of the orbit determination solution and the geometry structure of satellites that can be observed by stations and other satellites are significant improved, for which the average DPDOP values of GEO, IGSO, and MEO satellites are improved 50.2%, 73.0%, and 72.1%, respectively. • Simulated ISL observations improves the orbit determination accuracy of BDS-2. • Simulated ISL observations compensates for the observed arc of satellites. • Simulated ISL observations improves the observed structure of satellites. [ABSTRACT FROM AUTHOR]