Search

Aerosol deposition (AD) is a dynamic loading process that can be envisioned as a shock wave loading, necessitating the consideration of the elastic/plastic response of solid materials. Due to the dynamic nature of this process, however, experimental determination of the local pressures during the deposition process is difficult. This work addresses this by investigating the compression and subsequent structure modification of a silicate glass after room‐temperature AD on a silicate glass substrate with Raman spectroscopy. Clear structural changes in the short‐ and middle‐range order of the silicate glass were observed, both as intertetrahedral angle distribution and as ring statistic. Therefore, the AD induced permanent densification of the glass, equivalent, in a hydrostatic approximation, to a minimal pressure of 10.5 ± 1.5 GPa during the film deposition process. Furthermore, the analysis of the Nd3+ photoluminescence of the 4F3/2 − 4I9/2 transition provided complementary information on the glass network modifications occurring during film formation. More than a pure hydrostatic densification, the AD seems to present a very intense shear deformation. This work opens up the perspective of evaluating the mechanical response of film‐substrate and of the particles themselves, and provides critical information on the mechanisms responsible for the AD film formation. [ABSTRACT FROM AUTHOR]

Evolution of spectroscopic properties of a soda–lime silicate glass with different thermal history and under applied uniaxial stress was investigated using Raman and Brillouin spectroscopies as well as Nd3+ photoluminescence techniques. Samples of soda–lime silicate with a cooling rate from 6 × 10−4 to 650 K/min were prepared either by controlled cooling from the melt using a differential scanning calorimeter or by a conventional annealing procedure. Uniaxial stress effects in a range from 0 to −1.3 GPa were investigated in situ by compression of the glass cylinders. The spectroscopic observations of rearrangements in the network structure were related to the set cooling rates or the applied uniaxial stress to calculate an interrelated set of calibrations. Comparing the results from Raman and Brillouin spectroscopy with Nd3+ photoluminescence analysis, we find a linear dependence that can be used to identify uniaxial stress and cooling rate in any given combination concurrently. The interrelated calibrations and linear dependence models are established and evaluated, and equations relating the change of glass network due to effects of cooling rate or uniaxial stress are given. [ABSTRACT FROM AUTHOR]