Search

Two organo‐soluble polyimide (PI) resins were prepared from a tricyclic fluoro‐containing dianhydride 9,9‐bis(trifluoromethyl)xanthene‐2,3,6,7‐tetracarboxylic dianhydride (6FCDA) and aromatic diamine of 2,2‐bis[4‐(4‐aminophenoxy)phenyl]hexafluoropropane (BDAF) for PI‐IIa and 1,3‐bis(3‐aminophenoxy)benzene (133APB) for PI‐IIb, respectively. For comparison, two analogous PIs were prepared from 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride (6FDA) and the same diamines to afford PI‐Ia (6FDA‐BDAF) and PI‐Ib (6FDA‐133APB), respectively. Incorporation of the rigid and planar xanthene units in the 6FCDA‐PIs obviously decreased the solubility of the resins in organic solvents. Flexible and tough PI films were fabricated from the PI solutions in N,N‐dimethylacetamide (DMAc). The PI films derived from the rigid and planar 6FCDA dianhydride exhibited obviously enhance thermal stability, and high‐temperature dimensional stability. For example, PI‐IIa (6FCDA‐BDAF) showed the glass transition temperature (Tg) and coefficient of linear thermal expansion (CTE) values of 311.5°C and 50.5 × 10−6/K, respectively, which were all superior to those of the PI‐Ia counterpart (Tg = 264.6°C; CTE = 55.4 × 10−6/K). In addition, the 6FCDA‐PI films maintained the intrinsically excellent optical transparency of the fluoro‐containing PI films and showed the comparable optical properties to those of the 6FDA‐PI films. As for the properties highly related to the space applications, all the PI films exhibited low solar absorptivity (α) values of 0.18–0.20 and the good thermal emissivity (ε) values in the range of 0.68–0.70. PI‐Ia (6FDA‐BDAF) and PI‐IIa (6FCDA‐BDAF) films showed the similar atomic oxygen erosion behaviors with the standard Kapton® type of PI film derived from pyromellitic dianhydride (PMDA) and 4,4′‐oxydianiline (ODA). [ABSTRACT FROM AUTHOR]

Colorless and transparent polyimide (CPI) films with good atomic oxygen (AO) resistance and high thermal endurance are highly required in low earth orbit (LEO) space exploration. Conventional CPI films based on fluoro-containing 4,4′-(hexafluoroisopropylidene)diphthalic anhydride (6FDA) have been widely used in space applications. However, the AO erosion yields and glass transition temperatures (Tg) of the 6FDA-based CPI films have to be modified in order to meet the severe serving environments. In the current work, novel CPI films based on a multi-ring fluoro-containing 9,9-bis(trifluoromethyl)xanthene-2,3,6,7-tetracarboxylicdianhydride (6FCDA) monomer were developed. In order to enhance the AO resistance of the derived CPI film, a phosphorus-containing aromatic diamine, 2,5-bis[(4-aminophenoxy)phenyl]diphenylphosphine oxide (BADPO) was used to polymerize with the dianhydride to create the organo-soluble resin. Then, two phosphorus-containing CPI films (PPI), including PPI-1 (6FDA-BADPO) and PPI-2 (6FCDA-BADPO) were prepared by thermally curing of the PPI solutions at elevated temperatures. The PPI films maintained good optical transparency with transmittance values over 80% at a wavelength of 450 nm. PPI-2 exhibited a Tg value of 311.0 °C by differential scanning calorimetry (DSC) measurement, which was 46.7 °C higher than that of the PPI-1 counterpart (Tg = 264.3 °C). In addition, the PPI-2 film showed a coefficient of linear thermal expansion (CTE) value of 41.7 × 10−6/K in the range of 50~250 °C, which was apparently lower than that of the PPI-1 sample (CTE = 49.2 × 10−6/K). Lastly, both of the two PPI films exhibited good AO resistance with the erosion yields (Ey) of 6.99 × 10−25 cm3/atom for PPI-1 and 7.23 × 10−25 cm3/atom for PPI-2 at an exposure flux of 5.0 × 1020 atoms/cm2. The Ey values of the current PPI films were obviously lower than that of the standard polyimide (PI) film based on pyromellitic dianhydride (PMDA) and 4,4′-oxydianiline (ODA) (Ey = 3.0 × 10−24 cm3/atom). [ABSTRACT FROM AUTHOR]

Colorless and transparent semi‐alicyclic fluoro‐containing polyimide (PI) nanocomposite films with enhanced high‐temperature dimensional stability and sustained optical transparency were designed and prepared via incorporation of nano‐sized colloidal silica (SiO2) fillers into the PI matrix derived from hydrogenated pyromellitic dianhydride (HPMDA) and 2,2′‐bis[(4‐aminophenoxy)phenyl]hexafluoropropane (BDAF). The derived PI composite films, abbreviated as 6FCPI‐X in which X stands for the weight percent of the SiO2 in the composite films, exhibited superior thermal and comparable optical properties to the pristine 6FCPI‐0 (6FDA‐BDAF) matrix film. For example, as for the thermal properties, 6FCPI‐35 composite film showed a glass transition temperature (Tg) of 279.1°C and a residual weight ratio at 750°C (Rw750) of 66.1%, which were apparently higher than those of 6FCPI‐0 matrix (Tg = 272.2°C; Rw750 = 47.1%). More importantly, the 6FCPI/SiO2 nanocomposite films showed obviously lower linear coefficients of thermal expansion (CTE) values as compared with that of the 6FCPI‐0 matrix. 6FCPI‐35 composite film showed a CTE value of 36.1 × 10−6/K in the temperature range of 50–250°C, which was lower than half of that of the 6FCPI‐0 matrix (CTE = 77.9 × 10−6/K) in the same range of temperature. In addition, incorporation of nano‐sized colloidal SiO2 particles basically maintained the intrinsically good optical properties of the pristine 6FCPI‐0 matrix film. 6FCPI‐35 composite film showed the optical transmittances of 81.7%, 85.3%, and 87.2% at the wavelength of 400 nm (T400), 450 nm (T450), and 500 nm (T500), respectively, which were in the same level with those of the 6FCPI‐0 film (T400 = 84.0%; T450 = 86.3%; T500 = 87.6%). The 6FCPI series of nanocomposite films also exhibited similar CIE Lab color parameters, including the yellow indices (b*) lower than 2.0 and haze values lower than 1.0%. [ABSTRACT FROM AUTHOR]

Two solution‐processable semi‐alicyclic transparent polyimide (PI) films with improved high‐temperature dimensional stability and low‐optical retardations were prepared from the stereo‐isomeric alicyclic dianhydrides, 1S,2R,4S,5R‐hydrogenated pyromellitic dianhydride (ccHPMDA) and 1R,2S,4S,5R‐hydrogenated pyromellitic dianhydride (ctHPMDA) and an aromatic diamine, 9,9‐bis[4‐(4‐aminobenzamide)phenyl]fluorene (FDAADA), respectively. The alicyclic cyclohexane units in the dianhydride moiety endowed the derived PI‐1 (ccHPMDA‐FDAADA) and PI‐2 (ctHPMDA‐FDAADA) films good optical transparency, the rigid‐rod benzanilide units provided the PI films low coefficients of thermal expansion (CTE), and the fluorene units resulted in good solution processability and low‐optical retardations (Rth) for the PI films. The PI films exhibited the glass transition temperatures over 400°C and the CTE value of 33.2 × 10−6/K for PI‐1 and 29.0 × 10−6/K for PI‐2 in the temperature range of 50 ~ 250°C, respectively. In addition, the PI films showed good optical transparency in the ultraviolet–visible light region with the optical transmittances higher than 80% for PI‐1 film at the wavelength of 500 nm. The PI films exhibited the average refractive indices of 1.6505 for PI‐1 and 1.6485 for PI‐2 film, respectively. The birefringence values of the PI films were all lower than 0.01, resulting in the low‐optical anisotropies with the optical retardation (Rth) of 77 nm for PI‐1 film and 84 nm for PI‐2 film. [ABSTRACT FROM AUTHOR]

Nanotechnologies are being increasingly widely used in advanced energy fields. Triboelectric nanogenerators (TENGs) represent a class of new-type flexible energy-harvesting devices with promising application prospects in future human societies. As one of the most important parts of TENG devices, triboelectric materials play key roles in the achievement of high-efficiency power generation. Conventional polymer tribo-negative materials, such as polytetrafluoroethylene (PTFE), polyvinylidene difluoride (PVDF), and the standard polyimide (PI) film with the Kapton® trademark based on pyromellitic anhydride (PMDA) and 4,4′-oxydianiline (ODA), usually suffer from low output performance. In addition, the relationship between molecular structure and triboelectric properties remains a challenge in the search for novel triboelectric materials. In the current work, by incorporating functional groups of trifluoromethyl (–CF3) with strong electron withdrawal into the backbone, a series of fluorine-containing polyimide (FPI) negative friction layers have been designed and prepared. The derived FPI-1 (6FDA-6FODA), FPI-2 (6FDA-TFMB), and FPI-3 (6FDA-TFMDA) resins possessed good solubility in polar aprotic solvents, such as the N,N-dimethylacetamide (DMAc) and N-methyl-2-pyrrolidone (NMP). The PI films obtained via the solution-casting procedure showed glass transition temperatures (Tg) higher than 280 °C with differential scanning calorimetry (DSC) analyses. The TENG prototypes were successfully fabricated using the developed PI films as the tribo-negative layers. The electron-withdrawing trifluoromethyl (–CF3) units in the molecular backbones of the PI layers provided the devices with an apparently enhanced output performance. The FPI-3 (6FDA-TFMDA) layer-based TENG devices showcased an especially impressive open-circuit voltage and short-circuit current, measuring 277.8 V and 9.54 μA, respectively. These values were 4~5 times greater when compared to the TENGs manufactured using the readily accessible Kapton® film. [ABSTRACT FROM AUTHOR]

Polymeric optical films with light colors, good optical transparency and high thermal resistance have gained increasing attention in advanced optoelectronic areas in recent years. However, it is somewhat inter-conflicting for achieving the good optical properties to the conventional thermal resistant polymers, such as the standard aromatic polyimide (PI) films, which are well known for the excellent combined properties and also the deep colors. In this work, a series of wholly aromatic PI films were prepared via the polycondensation chemistry of one fluorene-containing dianhydride, 9,9-bis(3,4-dicarboxyphenyl)fluorene dianhydride (FDAn) and several aromatic diamines with amide linkages in the main chain, including 9,9-bis [4-(4-aminobenzamide)phenyl]fluorene (FDAADA), 2,2′-bis(trifluoromethyl)-4,4′-bis[4-(4-aminobenzamide)] biphenyl (ABTFMB), and 2,2′-bis(trifluoromethyl)-4,4′-bis[4-(4-amino-3-methyl)benzamide] biphenyl (MABTFMB). The derived FLPI-1 (FDAn-FDAADA), FLPI-2 (FDAn-ABTFMB) and FLPI-3 (FDAn-MABTFMB) resins showed good solubility in the polar aprotic solvents, such as N-methyl-2-pyrrolidone (NMP), N,N-dimethylacetamide (DMAc) and dimethyl sulfoxide (DMSO). The solution-processing FDAn-PI films exhibited good optical transmittance over 80.0% at a wavelength of 500 nm (T500), yellow indices (b*) in the range of 1.01–5.20, and haze values lower than 1.0%. In addition, the FDAn-PI films showed low optical retardance with optical retardation (Rth) values in the range of 31.7–390.6 nm. At the same time, the FDAn-PI films exhibited extremely high glass transition temperatures (Tg) over 420 °C according to dynamic mechanical analysis (DMA) tests. The FDAn-PI films showed good dimensional stability at elevated temperatures with linear coefficients of thermal expansion (CTE) in the range of (31.8–45.8) × 10−6/K. [ABSTRACT FROM AUTHOR]

Polyimide (PI) optical films with high glass transition temperatures (high-Tg), high optical transparency, and low optical retardations (low-Rth) are highly desired in advanced optoelectronic applications. However, the standard PI films usually suffer from deep colors, high optical anisotropies and limited Tg values. In the current work, a series of semi-alicyclic colorless and transparent PI (CPI) films were developed from hydrogenated pyromellitic dianhydride stereoisomers, 1S,2R,4S,5R-hydrogenated pyromellitic dianhydride and 1R,2S,4S,5R-hydrogenated pyromellitic dianhydride, and fluorene-containing diamines, including 9,9-bis(4-aminophenyl)fluorene and 9,9-bis(3-fluoro-4-aminophenyl)fluorene, respectively. The derived CPI films showed Tg values higher than 420 °C according to differential scanning calorimetry measurements. In addition, the fluorene-based CPI film showed optical transmittances higher than 80% at the wavelength of 400 nm, with yellow indices in the range of 0.60~1.01 and haze values below 3.0%. The CPI films showed average refractive indices from 1.5407 to 1.6309, extremely low birefringence at the level of minus fourth power of ten, and further exhibited quite low optical retardations below 10 nm. [ABSTRACT FROM AUTHOR]