Search

Fault locking inversion can clarify the occurrence mechanisms of large earthquakes and the seismic hazards of future earthquakes. Due to limited observations in mainland China, fault locking inversions have typically been unstable. To investigate a more suitable fault locking behavior of the Longmenshan Thrust Belt (LTB) preceding the 2008 Wenchuan earthquake, GNSS velocity field data during 1999–2007 and the least-squares collocation method (LSCM) are used in this study. Despite the limited stations, after interpolating the GNSS velocity with the LSCM, uncertainties are reduced to some extent during the inversion. Based on the interpolation data, the inversion shows two locked areas that are consistent with the coseismic slip distribution of the Wenchuan earthquake. The third locked area is located on the southern LTB. A checkerboard scheme is proposed, and historic earthquakes larger than M 3.0 since 1950 are analyzed to recheck our inversion. According to the inverted result, the Wenchuan and Lushan earthquakes are two independent events. Additionally, we propose that future destructive earthquakes may occur on the southern segment of the LTB. The maximum magnitude of a future possible earthquake is Mw 8.2. • The fault locking behavior of the Longmenshan Thrust Belt was investigated. • After interpolating the GNSS data, the fault locking inversion is more reasonable. • The southern segment of LTB is more capable of a large and destructive earthquake. [ABSTRACT FROM AUTHOR]

Global Positioning System (GPS) stations installed in and around the epicenter of the Lushan earthquake (Mw 6.7), which occurred almost 5 years after the 2008 Wenchuan earthquake, recorded preseismic deformation corresponding to the Lushan earthquake within the southern Longmenshan thrust belt. A half-space dislocation model is used to simulate the theoretical values of the postseismic displacements caused by the 2008 Wenchuan earthquake, and after transforming the reference frame and filtering the GPS displacement time series, the theoretical and observed GPS values are compared to identify the geodetic anomaly preceding the Lushan earthquake. The abnormal extent of this geodetic anomaly decreases with increasing epicentral distance for each GPS site. This geodetic signal reflects preslip along a locked section of the 2013 seismogenic fault, which caused the accumulation of elastic strain energy until the faulting strength was overcome, thereby generating the Lushan earthquake. Hence, this anomaly might be used as an observable and identifiable precursor to forecast an impending earthquake within a period of less than two and half years before its occurrence. [ABSTRACT FROM AUTHOR]

Until the Mw 6.6 Luding earthquake ruptured the Moxi section of the Xianshuihe fault (XSHF) on 5 September 2022, the region had not experienced an Mw >6 earthquake since instrumental records began. We used Global Positioning System (GPS) and Sentinel-1 interferometric synthetic aperture radar (InSAR) observations to image the coseismic deformation and constrain the location and geometry of the seismogenic fault using a Bayesian method We then present a distributed slip model of the 2022 Mw6.6 Luding earthquake, a left-lateral strike-slip earthquake that occurred on the Moxi section of the Xianshuihe fault in the southwest Sichuan basin, China. Two tracks (T26 and T135) of the InSAR data captured a part of the coseismic surface deformation with the line-of-sight displacements range from ∼−0.16 m to ~0.14 m in the ascending track and from ~−0.12 m to ~0.10 m in the descending track. The inverted best-fitting fault model shows a pure sinistral strike-slip motion on a west-dipping fault plane with a strike of 164.3°. We adopt a variational Bayesian approach and account for the uncertainties in the fault geometry to retrieve the distributed slip model. The inverted result shows that the maximum slip of ~1.82 m occurred at a depth of 5.3 km, with the major slip concentrated within depths ranging from 0.9–11 km. The InSAR-determined moment is 1.3 × 1019 Nm, with a shear modulus of 30 GPa, equivalent to Mw 6.7. The published coseismic slip models of the 2022 Luding earthquake show apparent differences despite the use of similar geodetic or seismic observations. These variations underscore the uncertainty associated with routinely performed source inversions and their interpretations for the underlying fault model. [ABSTRACT FROM AUTHOR]

Four gridding methods for GPS velocities are compared in terms of their precision, applicability and robustness by analyzing simulated data with uncertainties from 0.0 to ±3.0 mm/a. When the input data are 1° × 1° grid sampled and the uncertainty of the additional error is greater than ±1.0 mm/a, the gridding results show that the least-squares collocation method is highly robust while the robustness of the Kriging method is low. In contrast, the spherical harmonics and the multi-surface function are moderately robust, and the regional singular values for the multi-surface function method and the edge effects for the spherical harmonics method become more significant with increasing uncertainty of the input data. When the input data (with additional errors of ±2.0 mm/a) are decimated by 50% from the 1° × 1° grid data and then erased in three 6° × 12° regions, the gridding results in these three regions indicate that the least-squares collocation and the spherical harmonics methods have good performances, while the multi-surface function and the Kriging methods may lead to singular values. The gridding techniques are also applied to GPS horizontal velocities with an average error of ±0.8 mm/a over the Chinese mainland and the surrounding areas, and the results show that the least-squares collocation method has the best performance, followed by the Kriging and multi-surface function methods. Furthermore, the edge effects of the spherical harmonics method are significantly affected by the sparseness and geometric distribution of the input data. In general, the least-squares collocation method is superior in terms of its robustness, edge effect, error distribution and stability, while the other methods have several positive features. [ABSTRACT FROM AUTHOR]