Search

A novel eco-friendly two-step synthesis process of neutral pullulan (PUL)-ferulic acid (FA) conjugates was reported in this work. Ferulic acid was first transformed to activated ferulate-imidazolide using N,N'-carbonyldiimidazole (CDI), a green activated reagent. Issued product was then reacted with pullulan. PUL-FA derivatives were characterized by FTIR and 1 H NMR leading to substitution degrees (DS) between 0.02 and 0.1 (mol FA per mol PUL repeat unit). The study in dilute regime indicated an associative behavior with the presence of aggregate structures in solution due to the hydrophobic interactions between the grafted FA onto polysaccharide backbones. Laccase from Trametes versicolor was then used to crosslink polysaccharide chains to obtain biomimetic PUL-FA hydrogels. Gelling's kinetics were analyzed with rheology in dynamic mode showing the impact of laccase amount, DS and concentration. Mechanical and swelling properties appear related only to DS and concentration of PUL-FA products., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Antioxidant and cytocompatible chemically modified polysaccharides and their hydrogels were obtained by a biomimetic approach. For this purpose, carboxymethylpullulan grafted with ferulic acid (CMP-FA) was firstly synthesized with different substitution degrees (DS FA ). Their hydrogels were secondly obtained by enzymatic cross-linking with laccase. Hydrogel swelling has been found dependent on both DS FA and media ionic strength. The CMP-FA antioxidant properties were evaluated by the DPPH method and ABTS assays. The DPPH radical scavenging effect was high for CMP-FA solutions (80% after 30 min) and lower for the corresponding hydrogels (70% after 7 h). The antibacterial properties of ferulic acid and CMP-FA derivatives were tested against Staphylococcus aureus but the minimal inhibitory concentration of CMP-FA was not reached in the range of concentrations studied. Finally the CMP-FA derivatives showed no cytotoxicity towards mouse fibroblast cells., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

Carboxymethylpullulan (CMP) has been modified in a two-step grafting reaction of ferulic acid (FA). Acid adipic dihydrazyde (ADH) was first reacted with FA activated with 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride (EDC). Then the product of this first reaction was reacted with CMP (activated with EDC). Grafted polysaccharides structure was confirmed by FTIR and (1)H NMR spectroscopy. Analyses by size-exclusion chromatography (SEC) coupling on-line with a multi-angle light scattering detector (MALS), a viscometer and a differential refractive index detector (DRI) (SEC/MALS/DRI/Visco) showed that associations between FA moieties occurred due to hydrophobic interactions. The grafting rates of FA were determined by the Folin-Ciocalteu method and were found between 1.0% and 11.2% (mol/mol anhydroglucose unit). The CMP-FA were then enzymatically cross-linked with laccase from Pleurotus ostreatus. The crosslinking reactions were followed by rheological measurements, demonstrating the influence of laccase concentration on kinetics. Elastic modulus and swelling rates of hydrogels depends on FA content only for low values., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

The immobilization of pullulanase from Klebsiella pneumoniae by grafting was investigated. Pullulanase was linked after activation of alginate via a covalent bond between the amine groups of the enzyme and the carboxylic acid groups of alginate. The immobilization yield was 60%. The activity of free pullulanase and immobilized pullulanase was followed by the quantification of reducing ends by colorimetric assay and the determination of the molar masses of the hydrolyzed pullulan by SEC/MALS/DRI. Compared to free pullulanase, the kinetics is largely slowed. The evolution of the weight average molar mass of pullulan leading to high production of shorter oligosaccharides during hydrolysis is not the same as that obtained with free enzyme. Immobilized pullulanase retained 75% and 30% of its initial activity after 24 h and 14 days of incubation at 60°C, respectively while free pullulanase lost its activity after 5 h of hydrolysis at the same temperature. The kinetic parameters of immobilized pullulanase were also investigated by isothermal titration calorimetry (ITC). The affinity of immobilized enzyme to its substrate was reduced compared to the free pullulanase due to steric hindrance and chemical links., (© 2015 American Institute of Chemical Engineers.)

Thermoassociative nanoparticles were obtained through the crosslinking reaction of periodate oxidized carboxymethyl pullulan with two difunctional Jeffamines: ED-600 and ED-2003. The nanoparticles were characterized through (1)H NMR spectra; their particle size, determined by dynamic light scattering (DLS) presented a bimodal distribution, with dimensions varying as a function of amount and type of crosslinking agent used; transmission electron microscopy photos confirmed the spherical shape of the nanoparticles and their dimensions determined by DLS. Their amphiphilic character was evidenced by retention of the dyes: hydrophobic (Rose Bengal), amphiphilic (Brilliant Blue) and hydrophilic (Vitamin B12). The thermosensitive properties, more pronounced for ED-2003 crosslinked nanoparticles, were evidenced through absorbance variation, fluorescence and DLS measurements as a temperature function. The nanoparticles retain important amounts of anionic (diclofenac: 40-80 mg/g), cationic (methylene blue: 70-125 mg/g) and hydrophobic (alpha-tocopherol: 220-350 mg/g) drugs. The in vitro characterization of the drug-polymer conjugates recommends the synthesized nanoparticles as supports for drug delivery., (Copyright © 2014 Elsevier Ltd. All rights reserved.)

Pullulanase from Klebsiella pneumoniae was entrapped into calcium alginate beads. Its activity was estimated by the determination of number-average molar masses using two different methods: a colorimetric assay of reducing ends (REs) and a size-exclusion chromatography/multiangle light scattering/differential refractive index. The second method also provided weight-average molar masses of hydrolyzed pullulan and the quantity of maltotriose (DP3) and its multiples (DP6 and DP9) produced by the enzymatic treatment. The alginate beads showed a good retention of the loaded pullulanase (30%), and the system showed a downturn of hydrolysis kinetics in comparison with free pullulanase due to the limiting access of substrate-enzyme. On the contrary with the results obtained from free enzyme hydrolysis, for which a large distribution of pullulan fragments is observed during the treatment, the immobilized enzyme system has evidenced, during the enzymatic treatment, the coexistence of native or only slightly degraded pullulan chains together with maltotriose units. Complete hydrolysis of pullulan chains was achieved once diffused into the gel., (© 2014 Wiley Periodicals, Inc.)

The behavior of a hydrolytic enzyme (pullulanase) toward its substrate (pullulan) in the presence of a nonsubstrate (alginate), both below and above the critical entanglement concentration (C*), was studied. The hydrolysis kinetics were studied with the enzyme and alginate concentrations varied using two main methods: a colorimetric assay of the reducing extremities (RE), which allowed the number-average molar masses (Mn) of the oligosaccharides to be determined, and size exclusion chromatography with on-line, multiangle light scattering, viscometer, and differential refractive index detectors, which allowed the average molar masses, Mn and Mw, of the oligosaccharides during hydrolysis to be determined. Free pullulanase acts via an "endo" process. The presence of alginate slows the hydrolysis kinetics, particularly when the alginate concentration is greater than the C*. These results were confirmed by the evolution of the kinetic parameters (KM, Vmax) obtained via isothermal titration calorimetry (ITC). The amount of oligosaccharides produced is not dependent on the alginate concentration, and the endo enzyme behavior is not modified by the entanglement in the medium. These observations were also confirmed by ITC analysis in the presence of degraded alginate (without entanglement). Our results correlated with the substrate diffusion in entangled media. The pullulanase reaction in the presence of alginate is shown to be diffusion-dependent.

The water soluble properties of different copolymers based on pullulan-block-polyetheramine have been deeply studied. The polyetheramine group (PEA) corresponding to a propylene oxyde/ethylene oxyde ratio (PO/EO) of 29/6, is condensed, via amine link, to pullulans with various chain lengths. Different polysaccharide/PEA (PS/PEA) ratio copolymers have been investigated through macroscopic (cloud point, enthalpy) and mesoscopic scale approaches (critical aggregation concentration (CAC), mean number average hydrodynamic diameter (Dh) or aggregation number (Nag)). These systems are both pH and/or thermo-sensitive. Finally, it seems that three states can describe such systems (i) isolated copolymers (unimers) below the CAC, (ii) water soluble aggregates above the CAC and whatever the PS/PEA ratio is due to hydrophobic interactions and (iii) non-soluble aggregates (above the critical temperature) due to dehydration of polyetheramine groups but only if PS/PEA ratio is low enough., (Copyright © 2013 Elsevier Ltd. All rights reserved.)

Interfacial behavior of a thermosensitive homologous series of linear copolymers based on polyetheramine (commercially named Jeffamine® M2005) and on pullulan is investigated. The influence of the polysaccharide block length has been significantly highlighted on the copolymer structuring at the aqueous solution/air interface. Indeed, these systems induce a decrease in the surface tension depending on the pullulan length. To highlight the impact of the pullulan length in such a series at the aqueous solution/air interface, the interfacial rheological measurement and the transferred Gibbs films of these systems have been studied. The storage modulus of the adsorption layers and the Gibbs film thickness increase along with the length of pullulan in the block, probably because of a structuring effect in the subphase and to an entanglement effect of the pullulan chains under the interface. Moreover, the results obtained through the transferred Gibbs films backup those obtained by the surface tension and the interfacial rheological measurements., (Copyright © 2013 Elsevier Inc. All rights reserved.)

Pullulanase is an enzyme that hydrolyses the α-1,6 linkages of pullulan (Pull) to produce maltotriose units. We studied the capacity of pullulanase to cleave its modified substrate: carboxymethylpullulan (CMPull), synthesized with two different degrees of substitution (DS=0.16 and 0.8). Size exclusion chromatography with on line multi angle light scattering and differential refractive index detection (SEC/MALS/DRI) was used to estimate both number and weight average molar masses, respectively, Mn and Mw, of pullulan and CMPulls together with the percentage of maltotriose formed during hydrolysis. Determination of reduced sugars gave also a Mn that is compared to data obtained by SEC. It revealed that CMPull is partially degraded by pullulanase and the rate of hydrolysis decreased with increased DS. At the end of the hydrolysis, Mn is decreased by a factor of 23 and 1.7 for CMPull with a DS of 0.16 and 0.8 respectively. The percentage of produced maltotriose decreased also when increasing DS (24% and 7% for CMPull DS 0.16 and 0.8 respectively). The kinetic properties of pullulanase were also investigated with Pull and CMPulls by isothermal titration calorimetry (ITC) using simple injection method. Based on Michaelis-Menten kinetics, Vmax (maximal velocity) decreased and KM (Michaelis constant) increased when DS of modified pullulan CMPull increased., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

The paper studies the synthesis and characterization of crosslinked carboxymethylpullulan hydrogels containing Jeffamine (Jef) (M-600 and M-2005) [polyoxyalkyleneamines (polyethylene oxide, polypropylene oxide)] units as side chains, linked through amide bonds. These hydrogels present pH sensitive properties due to the presence of anionic functional groups and thermoassociative properties due to the Jeff units. They were characterized through FTIR spectra, swelling behavior in various media, at various pH or temperatures, retention of hydrophobic molecules, to appreciate their pH-sensitive and thermoassociative (multi-responsive) properties. The interaction with biomolecules as proteins: lysozyme, BSA and antioxidants as: lutein and alpha-tocopherol was studied, to estimate some potential application domains of these new synthesized hydrogels., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

Purpose: This work was intended to develop and evaluate a new polymeric system based on amphiphilic carboxymethylpullulans (CMP(49)C(8) and CMP(12)C(8)) that can spontaneously self-assemble in aqueous solutions and efficiently solubilize hydrophobic drugs., Methods: The self-assembling properties of CMP(49)C(8) and CMP(12)C(8) were characterized by fluorescence spectroscopy and surface tension measurements. The solubilization of benzophenone and docetaxel was assessed from surface tension measurements, UV spectrometry and HPLC assays. The in vitro cytoxicity of CMP(49)C(8) solutions and the docetaxel commercial vehicle (Tween 80/Ethanol-water) were evaluated in the absence and in the presence of docetaxel., Results: Compared to CMP(12)C(8), CMP(49)C(8) in aqueous solutions appeared to self-organize into monomolecular aggregates containing hydrophobic nanodomains, and to significantly increase the apparent solubility of benzophenone. Docetaxel solubility could also be improved in the presence of CMP(49)C(8) but to a lower extent due to the surface properties of the drug. Nevertheless, in vitro, the cytotoxicity studies revealed that against cancer cells, the CMP(49)C(8)-docetaxel formulation was equipotent to the commercial docetaxel one. Furthermore, in the absence of the drug, CMP(49)C(8) appeared less cytotoxic against macrophages than the Tween 80/Ethanol-water., Conclusions: CMP(49)C(8) is a good candidate for solubilizing hydrophobic drugs and could be applied to docetaxel formulations.

Pullulan derivative was synthesized by coupling carboxymethylpullulan (degree of substitution DS(0)(in)=0.7) and dimethylaminopropylamine (DMAPA), activated by a hydrosoluble carbodiimide N(')-(3-dimethylaminopropyl)-N-ethylcarbodiimide hydrochloride (EDAC). FTIR and (13)C and (1)H NMR spectroscopic analyses have evidenced that the polysaccharide has been successfully modified. (1)H NMR, nitrogen analysis, and conductimetric measurements allow determination of the degree of substitution in both carboxylic acid and amine functions. We have found that both functions present a similar DS of 0.35, which is characteristic of an ampholytic polymer with possible zwitterionic-type properties. Solution properties have been studied by flow field flow fractionation (F4) coupled on-line with multiangle laser light scattering (MALLS) and quasi elastic light scattering (QELS), surface tension, and viscosity measurements. The behavior has been found largely pH dependent and an amphiphilic behavior has been evidenced in alkaline media.

Size-exclusion chromatography (SEC) is a useful steric separation technique for the analysis of water-soluble polysaccharides in aqueous solution. However, in the case of amphiphilic derivatives, the usefulness is limited because of interactions between hydrophobic segments and the stationary phase. Alkyl-bearing pullulans differing from the extent and the length of alkyl groups were characterized using flow-field flow fractionation with on-line coupling multi-angle laser light scattering (F4/MALLS). Comparison of SEC and F4 is presented and the interest of F4 in the field of amphiphilic derivatives is demonstrated.