Search

New sensation: A resistance-based biosensor uses gold-coated magnetic nanoparticles (Au@MNPs) functionalized with the antibiotic enrofloxin (see picture; purple), which bind to anti-enrofloxin as analyte (blue). The Au@MNPs can be magnetically assembled between electrodes, and the measured resistance R is a function of analyte concentration., (Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Herein, we demonstrate the use of modified gold-coated magnetic nanoparticles as 'dispersible electrodes' which act as selective capture vehicles for electrochemical detection of prostate-specific antigen (PSA). A key advantage of this system is the ability to quantify non-electrochemical active analytes such as proteins with unprecedented detection limits and fast response times., (This journal is © The Royal Society of Chemistry 2012)

The effect of gold attachment on the physical characteristics, cellular uptake, gene expression efficiency, and biocompatibility of magnetic iron oxide (MNP) vector was investigated in vitro in BHK21 cells. The surface modification of magnetite with gold was shown to alter the morphology and surface charge of the vector. Nonetheless, despite the differences in the surface charge with and without gold attachment, the surface charge of all vectors were positive when conjugated with PEI/DNA complex, and switched from positive to negative when suspended in cell media containing serum, indicating the adsorption of serum components onto the composite. The cellular uptake of all MNP vectors under the influence of a magnetic field increased when the composite loadings increased, and was higher for the MNP vector that was modified with gold. Both bare magnetite and gold-coated magnetite vectors gave similar optimal gene expression efficiency, however, the gold-coated magnetite vector required a 25-fold higher overall loading to achieve a comparable efficiency as the attachment of gold increased the particle size, thus reducing the surface area for PEI/DNA complex conjugation. The MNP vector without gold showed optimal gene expression efficiency at a specific magnetite loading, however further increases beyond the optimum loading decreased the efficiency of gene expression. The drop in efficiency at high magnetite loadings was attributed to the significant reduction in cellular viability, indicating the bare magnetite became toxic at high intracellular levels. The gene expression efficiency of the gold-modified vector, on the other hand, did not diminish with increasing magnetite loadings. Intracellular examination of both bare magnetite and gold-coated magnetite vectors at 48h post-magnetofection using transmission electron microscopy provided evidence of the localization of both vectors in the cell nucleus for gene expression and elucidated the nuclear uptake mechanism of both vectors. The results of this work demonstrate the efficacy of gold-modified vectors to be used in cellular therapy research that can function both as a magnetically-driven gene delivery vehicle and an intracellular imaging agent with negligible impact on cell viability., (Copyright © 2010 Elsevier Inc. All rights reserved.)

Herein, we introduce the concept of utilizing conductive gold-coated magnetic nanoparticles as 'dispersible electrodes', which serve as the active element in the selective capture and direct electro-analytical quantification of analytes. This concept reduces response times and decreases detection limits by bringing the sensor to the analyte rather than the conventional paradigm of the analyte finding the sensor.

Physical and electrochemical properties of gold nanoparticle-based electrodes are highlighted. Polycrystalline gold electrodes are passivated by a self-assembled monolayer, then the immobilization of gold nanoparticles "switch on" the electrochemical reactivity of ruthenium. Herein, gap-mode Raman studies show that the location of the nanoparticles is on the top of the monolayer, meaning that the "switching on" cannot be attributed to a direct electrical contact between nanoparticles and the gold support. This "switching on" feature is also not affected by the size of the gold nanoparticles with a range of diameters between 4 and 67 nm. Further, the charge of the nanoparticles is investigated by grafting chemical groups onto the nanoparticles which is observed to alter the electron-transfer kinetics. The variation in rate constant however is insufficient to attribute the "switching on" phenomenon to a possible adsorption of the redox species onto the nanoparticles.

A nonaqueous photodeposition procedure for forming Au nanoparticles on semiconducting supports (TiO(2), CeO(2), and ZrO(2)) was investigated. Intrinsic excitation of the support was sufficient to induce Au(0) nucleation, without the need for an organic hole-scavenging species. Photoreduction rates were higher over TiO(2) and ZrO(2) than over CeO(2), likely due to a lower rate of photogenerated electron recombination. Illumination resulted in metallization of the adsorbed Au species and formation of crystalline Au nanoparticles dispersed across the oxide surfaces. On the basis of transmission electron microscopy (TEM) evidence of a strong Au particle-metal oxide interaction, it is proposed that Au deposit formation proceeds via the nucleation of highly dispersed clusters which can diffuse and amalgamate at room temperature to form larger surface-defect-immobilized clusters, with the final particle size being significantly smaller than that achieved by conventional aqueous photodeposition. From this work, it is possible to draw several new fundamental insights, with regards to both the nonaqueous photodeposition process and the general mechanism by which dispersed metallic Au nanoparticles are formed from ionic precursors adsorbed upon metal oxide supports.

Abstract: Visible light pre‐treatment has been found to be capable of enhancing the catalytic oxygen activation on AuPt/TiO2 by up to seven times. Visible light pre‐treatment exploits the localized surface plasmon resonance effect of Au to generate free electrons, which are transferred to the Pt active sites. The electron transfer was evident from a change in Pt speciation observed from X‐ray photoelectron spectroscopy, showing the presence of PtO after visible light pre‐treatment. Photoluminescence spectroscopy was used to reveal the bimetallic synergistic enhancement, as indicated by an overall decrease in the charge recombination rate. Further examination revealed that a good bimetallic interaction is necessary to achieve the enhancement by visible light pre‐treatment. Weak bimetallic interaction, such as the occurrence of element segregation in the bimetallic alloy, inhibits electron transfer from the Au to the Pt and increases electron recombination rates, diminishing the degree to which visible light pre‐treatment improves catalytic performance. [ABSTRACT FROM AUTHOR]

An ensemble cast: The confinement of ensembles of Au‐Pd inside unique mesoporous TiO2 spheres contributes to their superior photocatalytic activity. Direct spectroscopic evidence reveals that the addition of palladium could suppress the growth of gold nanoclusters and prolong the lifetime of the excited electrons on these nanoclusters, thereby resulting in enhanced photoactivity. [ABSTRACT FROM AUTHOR]

Herein, we investigate the mechanisms involved in the selective oxidation of ethanol to acetaldehyde by localised surface plasmon resonance (LSPR) enhanced Au-Cu alloys. Temperature programmed oxidation results in tandem with quantitative in-situ DRIFTS of the surface species under different illumination conditions revealed that the cleaving of C C bonds at the Au-TiO 2 interface were inhibited in the presence of Cu at temperatures <175 °C. HAADF-STEM and XPS analysis of the spent catalysts demonstrated that the suppression of C C cleavage was due to selective electron transfer between the atomically ordered Cu and Au arrays. Thus, the selectivity of Au-Cu/TiO 2 towards the formation of acetaldehyde could be enhanced by over 800% at 100 °C under visible light illumination compared to standard thermal catalysis. Nonetheless, the selective electron charge transfer was disrupted at temperature >175 °C, lowering acetaldehyde selectivity. The work suggests that LSPR photo-enhancement is defined by the inherent electronic interactions within the bimetallic alloy and is facilitated by atomically ordering of the Au-Cu arrays. As such, in addition to performance enhancement, LSPR photo-enhancement can be used in combination with other characterisation techniques to ascertain the selective electronic pathways in bimetallic catalysts. [ABSTRACT FROM AUTHOR]