Search

Adsorption of a biofouling layer on the surface of biosensors decreases the electrochemical activity and hence shortens the service life of biosensors, particularly implantable and wearable biosensors. Real-time quantification of the loss of activity is important for in situ assessment of performance while presenting an opportunity to compensate for the loss of activity and recalibrate the sensor to extend the service life. Here, we introduce an electrochemical noise measurement technique as a tool for the quantification of the formation of a biofouling layer on the surface of gold. The technique uniquely affords thermodynamic and kinetic information without applying an external bias (potential and/or current), hence allowing the system to be appraised in its innate state. The technique relies on the analysis of non-faradaic current and potential fluctuations that are intrinsically generated by the interaction of charged species at the electrode surface, i.e., gold. An analytical model is extended to explain the significance of parameters drawn from statistical analysis of the noise signal. This concept is then examined in buffered media in the presence of albumin, a common protein in the blood and a known source of a fouling layer in biological systems. Results indicate that the statistical analysis of the noise signal can quantify the loss of electrochemical activity, which is also corroborated by impedance spectroscopy as a complementary technique.

The assembly of sophisticated gold nanoparticle constructs where thermoresponsive core-satellite nanostructures are created and the satellites are close enough to the core for strong surface plasmon resonance coupling to occur, has begun to be developed. The linker between the core and the satellites being a thermoresponsive polymer means that a dispersion of these nanostructures will show temperature-dependent optical properties as the distance between the core and the satellites changes. Unlike previous related thermoresponsive core-satellite systems that undergo a single thermoresponsive transition, herein a polymer system with dual thermoresponsive transitions (block copolymer with both lower critical solution temperature and upper critical solution temperature) is employed as a linker that modulates the gap distance between the "core" and "satellites" in response to the temperature. In this way, optical properties of dispersions can be dynamically tuned. The system permits wide and reversible control of the optical properties, which may render them excellent candidates for reversible nanosensors., (© 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Gold coated magnetic nanoparticles (Au@MNPs) have become increasingly interesting to nanomaterial scientists due to their multifunctional properties and their potential in both analytical chemistry and nanomedicine. The past decade has seen significant progress in the synthesis and surface modification of Au@MNPs. This progress is based on advances in the preparation and characterization of iron/iron oxide nanocrystals with the required surface functional groups. In this critical review, we summarize recent developments in the methods of preparing Au@MNPs, surface functionalization and their application in analytical sensing and biomedicine. We highlight some of the remaining major challenges, as well as the lessons learnt when working with Au@MNPs.

The conjugation of gold nanorods (AuNRs) with polyethylene glycol (PEG) is one of the most effective ways to reduce their cytotoxicity arising from the cetyltrimethylammonium bromide (CTAB) and silver ions used in their synthesis. However, typical PEGylation occurs only at the tips of the AuNRs, producing partially modified AuNRs. To address this issue, we have developed a novel, facile, one-step surface functionalization method that involves the use of Tween 20 to stabilize AuNRs, bis(p-sulfonatophenyl)phenylphosphine (BSPP) to activate the AuNR surface for the subsequent PEGylation, and NaCl to etch silver from the AuNRs. This method allows for the complete removal of the surface-bound CTAB and the most active surface silver from the AuNRs. The produced AuNRs showed far lower toxicity than other methods to PEGylate AuNRs, with no apparent toxicity when their concentration is lower than 5 μg/mL. Even at a high concentration of 80 μg/mL, their cell viability is still four times higher than that of the tip-modified AuNRs.

The phenomenon of nanoparticles attached to an electrode passivated by an organic layer allowing efficient electron transfer between redox species in solution and the underlying electrode to be restored has resulted in Chazalviel and Allongue proposing a theory [Chazalviel, J.-N.; Allongue, P. J. Am. Chem. Soc.2011, 133, 762-764] to explain this phenomenon. The theory suggests that with electrode-organic layer-nanoparticle constructs, high exchange current densities, compared with when the nanoparticles are absent, results in the rate of electron transfer being independent of the thickness of the organic layer until a threshold thickness is exceeded. Thereafter, the thicker the organic layer, the slower the rate of electron transfer. Herein we provide the first experimental data to support this theory using a single experimental system that can show the transition from thickness independent electron transfer kinetics to distant dependent kinetics. This was achieved using ethylenediamine electrodeposited on a glassy carbon electrode. Different numbers of deposition cycles were applied in order to fabricate different thicknesses of the organic film. The deposited films showed progressively greater blocking abilities toward ruthenium hexamine, as a redox active probe in solution, as the films got thicker. Electron transfer kinetics of nanoparticle-decorated surfaces showed a change from thickness independent to thickness dependent as the organic layer exceeded an average thickness of 20 Å. Electrochemical impedance spectroscopy, cyclic voltammetry, scanning electron microscopy, ellipsometry, and atomic force microscopy were used to characterize the fabricated surfaces.

New sensation: A resistance-based biosensor uses gold-coated magnetic nanoparticles (Au@MNPs) functionalized with the antibiotic enrofloxin (see picture; purple), which bind to anti-enrofloxin as analyte (blue). The Au@MNPs can be magnetically assembled between electrodes, and the measured resistance R is a function of analyte concentration., (Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A simple colorimetric method for the detection of copper ions in water is described. This method is based on the 'click' copper(I)-catalyzed azide-alkyne cycloaddition reaction and its use in promoting the aggregation of azide-tagged gold nanoparticles by a dialkyne cross-linker is described. Nanoparticle cross-linking, evidenced as a colour change, is used for the detection of copper ions. The lowest detected concentration by the naked eye was 1.8 μM, with the response linear with log(concentration) between 1.8-200 μM. The selectivity relative to other potentially interfering ions was evaluated., (This journal is © The Royal Society of Chemistry 2012)

Electrodes modified with passivating organic layers have been shown to, here and previously, to exhibit good Faradaic electrochemistry upon attachment of gold nanoparticles (AuNP). Due to their low background capacitances these constructs have good potential in electrochemical sensing. Herein is reported the application of these electrode constructs for impedance based immunosensing. The immunosensor was constructed by modifying a gold electrode with 4-thiophenol (4-TP) passivating layers by diazonium salt chemistry. Subsequently, the attachment of AuNP and then a biotin derivative as a model epitope to detect anti-biotin IgG were carried out. The interfacial properties of the modified electrodes were evaluated in the presence of Fe(CN)(6)(4-/3-) redox couple as a probe by cyclic voltammetry and electrochemical impedance spectroscopy. The impedance change, due to the specific immuno-interaction at the immunosensor surface was utilized to detect anti-biotin IgG. The increase in charge-transfer resistance (R(ct)) was linearly proportional to the concentration of anti-biotin IgG in the range of 5-500 ng mL(-1), with a detection limit of 5 ng mL(-1)., (Copyright © 2011 Elsevier B.V. All rights reserved.)

Herein, we introduce the concept of utilizing conductive gold-coated magnetic nanoparticles as 'dispersible electrodes', which serve as the active element in the selective capture and direct electro-analytical quantification of analytes. This concept reduces response times and decreases detection limits by bringing the sensor to the analyte rather than the conventional paradigm of the analyte finding the sensor.

Physical and electrochemical properties of gold nanoparticle-based electrodes are highlighted. Polycrystalline gold electrodes are passivated by a self-assembled monolayer, then the immobilization of gold nanoparticles "switch on" the electrochemical reactivity of ruthenium. Herein, gap-mode Raman studies show that the location of the nanoparticles is on the top of the monolayer, meaning that the "switching on" cannot be attributed to a direct electrical contact between nanoparticles and the gold support. This "switching on" feature is also not affected by the size of the gold nanoparticles with a range of diameters between 4 and 67 nm. Further, the charge of the nanoparticles is investigated by grafting chemical groups onto the nanoparticles which is observed to alter the electron-transfer kinetics. The variation in rate constant however is insufficient to attribute the "switching on" phenomenon to a possible adsorption of the redox species onto the nanoparticles.

Herein, we report on the production of nanoelectrode arrays by attaching colloidal gold on silicon-bound mixed self-assembled monolayers of TFA-protected alkenylthiol (C(11)-S-TFA) and undecylenic acid (acid). Effective modification of the surface, tethering of the nanoparticles, and the direct influence of the deprotected alkenylthiol (C(11)-SH) /acid ratio on the number of adherent particles were demonstrated using X-ray photoelectron spectroscopy, electrochemistry, and atomic force microscopy. Cyclic voltammetry showed that the enhancement of electron transfer to the silicon surface by the presence of nanoparticles is influenced by the number of tethered nanoparticles.

This communication reports an efficient visual detection method of Cu2+ by L-cysteine functionalized gold nanoparticles in aqueous solution. Upon exposure to Cu2+, the gold nanoparticle solution changed from red to blue, in response to surface plasmon absorption of dispersed and aggregated nanoparticles. This colorimetric sensor allows a rapid quantitative assay of Cu2+ down to the concentration range of 10(-5) M. Recognition of Cu2+ and formation of the aggregates are proposed to occur via a 2 : 1 sandwich complex between L-cysteine and Cu2+.

Peptide-modified electrode surfaces have been shown to have excellent recognition properties for metal ions. An efficient method of screening a potential peptide for its selectivity for a given metal would involve the synthesis of the peptide directly on the electrode surface. This paper outlines a procedure in which the tripeptide Gly-Gly-His was synthesized one amino acid at a time on a gold surface modified with a self-assembled monolayer of the mixed alkanethiolates 3-mercaptopropionic acid (MPA) and 3-mercaptopropane (MP). Electrochemistry and high-resolution mass spectrometry were used to elucidate the structure of the adsorbed species and follow the synthesis. The amino acids can be attached only to MPA, but the presence of a diluting unreactive molecule of MP reduces steric crowding about the reaction center. The maximum coverage of synthesized tripeptide occurs at a ratio of MPA/MP of 1:1.

A general mass spectrometry technique for the characterization of alkanethiol-modified surfaces is presented. Alkanethiol self-assembled onto a gold surface (in this case, peptides were attached to the gold surface via a thiolate bond) was reductively desorbed in 0.05 M KOH in the presence of octadecyl-derivatized silica gel. The peptide adsorbed onto the silica gel, whereupon it could be filtered, washed to remove any salts, and then eluted using a mixture of 4:1 v/v methanol/water. The eluant containing the peptide was injected into a Fourier transform ion-cyclotron resonance mass spectrometer (FTICR/MS) via electrospray ionization. The spectrum showed no fragmentation of the peptide, demonstrating the gentleness of the technique. This simple procedure is not limited to FTICR/MS and could be adapted to other mass spectrometers.

An effective strategy for regioselective modification and directional assembly of anisotropic nanoparticles is demonstrated to explore the electric field enhancement in assembled gold nanobipyramids compared with gold nanorods. The well-defined secondary plasmonic hot spots between the coupled gold nanobipyramids exhibit the capability for single molecule detection. [ABSTRACT FROM AUTHOR]

The In My Element series celebrates the personal accounts from Chemistry – A European Journal Editorial Board members for the 2019 International Year of the Periodic Table. In this contribution, Justin Gooding gives his story on gold. [ABSTRACT FROM AUTHOR]

Abstract: The heterogeneous electron-transfer properties of ferrocenemethylamine coupled to a series of mixed 4-carboxyphenyl/phenyl monolayers on glassy carbon (GC) and gold electrodes were investigated, by cyclic voltammetry, in aqueous buffer solutions. The electrodes were derivatized in a step-wise process. Electrochemical reduction of mixtures of 4-carboxyphenyl and phenyl diazonium salts on the electrode surfaces yielded stable monolayers. The introduction of carboxylic acid moieties onto the surfaces was verified by X-ray photoelectron spectroscopy. Subsequently the 4-carboxyphenyl moieties were activated using water-soluble carbodiimide and N-hydroxysuccinimide and reacted with ferrocenemethylamine. The rate constants of electron transfer through the monolayer systems were determined from cyclic voltammograms using the Marcus theory for electron transfer and were found to be an order of magnitude higher for the ferrocene-modified monolayer systems on gold than those on GC electrodes. The results suggest the electrode material has an important influence on the rate of electron transfer. [Copyright &y& Elsevier]

Review: 115 refs. [ABSTRACT FROM AUTHOR]