Search

Abstract: A novel high-performance electrode material based on fibrillar polyaniline (PANI) doped with graphene oxide sheets was synthesized via in situ polymerization of monomer in the presence of graphene oxide, with a high conductivity of 10Scm−1 at 22°C for the obtained nanocomposite with a mass ratio of aniline/graphite oxide, 100:1. Its high specific capacitance of 531F/g was obtained in the potential range from 0 to 0.45V at 200mA/g by charge–discharge analysis compared to 216F/g of individual PANI. The doping and the ratio of graphene oxide have a pronounced effect on the electrochemical capacitance performance of the nanocomposites. [Copyright &y& Elsevier]

Ultrafine CuS nanoparticles anchored on nitrogen-sulfur co-doped graphene nanosheets are synthesized by a simple-green solvothermal method, the composite has excellent electrochemical performance for CO 2 reduction. [Display omitted] • The CuS/N, S-rGO was synthesized via a facile and environmentally friendly method. • The co-doping of N and S on graphene can promote the activation and conversion of CO 2. • CuS/N, S-rGO exhibits outstanding formate selectivity for CO 2 RR. Electrochemical conversion of CO 2 into hydrocarbons can effectively alleviate the energy crisis and promote carbon cycle. Herein, we report that small-size CuS nanoparticles are confined in nitrogen and sulfur co-doped reduced graphene oxide (CuS/N,S-rGO) for electrochemically reducing CO 2 to formate. Specifically, the CuS/N,S-rGO electrode achieves maximum Faradaic efficiency of 82% for formate formation at −0.63 V versus the reversible hydrogen electrode (RHE). Moreover, this catalyst exhibits a stable performance during 20 h-electrolysis. Experiments demonstrate that the doping of nitrogen and sulfur can create an abundance of active sites on the graphene nanosheets to accelerate the CO 2 reduction reaction (CO 2 RR). The CuS/N,S-rGO electrode exhibits excellent performance for CO 2 RR is attributed to the synergistic effect between N,S-rGO and CuS, and graphene can improve stability of composite. This work provides an efficient electrocatalyst for CO 2 RR and offers a facile and environmental friendly approach to synthesize small-size Cu-based composites. [ABSTRACT FROM AUTHOR]

Abstract: A novel poly(3,4-ethylenedioxy-thiophene) (PEDOT)/graphene oxide (GO) hybrid film was directly electrodeposited on a glassy carbon electrode. The SEM and TEM images of the as-obtained film revealed that PEDOT grew well on the surface of GO sheets with high affinity. The chemical structure of the composite was characterized by FT-IR, and the result conformed the formation of PEDOT doped by GO, leading to the enhanced electrochemical performance of the modified electrode. The composite modified electrode was utilized as an electrochemical sensor for the simultaneous detection of hydroquinone (HQ) and catechol (CT). It showed well electrocatalytic activity toward the redox of HQ and CT. Under the optimized condition, the response peak currents of the modified electrodes were linear over ranges from 2.5 to 200μM for HQ and from 2 to 400μM for CT. The sensor also exhibited good sensitivity with the detection limit of 1.6μM for both HQ and CT, and good stability. This study provides a new kind of composite modified electrode for electrochemical sensors. [Copyright &y& Elsevier]

• Hierarchical layered Fe 3 O 4 QDs@C/rGO array derived from MIL-100(Fe)/GO. • Graphene and mesoporous carbon act as conductive support for anchoring Fe 3 O 4 QDs. • Multi-porous channels increase interface contacts and facilitate ion transportation. • Synergetic effect in Fe 3 O 4 QDs@C/rGO array results in the enhanced LIB performance. Herein, a double-buffering strategy is presented to boost the lithium storage potential of Fe 3 O 4. Firstly, the skeleton of MIL-100 (Fe) MOF is grown on graphene oxide, as a self-assembled template via in-situ solvothermal approach, which transform into ultrafine, well-dispersed and mesoporous carbon coated Fe 3 O 4 QDs (4 nm) imbedded on reduced graphene oxide (Fe 3 O 4 QDs@C/rGO), by pyrolysis. Each component in such a well-designed porous hierarchical structure significantly contributes to the remarkable enhancement of lithium ion storage performance, leading to high reversible capability with excellent prolonged cyclic stability after 2000 cycles (505 mAh g−1 at 2.0 A g−1). Both, Graphene sheets and mesoporous carbon act as conductive support for anchoring uniform Fe 3 O 4 QDs with confined double buffering for cyclic volume flux. Multi-channels with uniform mesopores in the self-assembled array and 4 nm QDs of Fe 3 O 4 confined in conductive carbon shells were favorable to enhance the interfacial electron/ion transfer, leading to the excellent rate and cycling performance with released volume changes upon Li+ insertion/extraction. The present research work provides a promising outset design and synthesis strategies for metal oxide QDs based nanocomposites, which may also be extended to the other electrode material system. [ABSTRACT FROM AUTHOR]