Search

The persistence of pharmaceutical and personal care products (PPCPs) such as norfloxacin (NFX) poses a serious threat to the water environment, and the development of efficient and cost-effective advanced oxidation catalysts is an important step toward resolving this issue. Herein, Fe and N co-doped graphene (FeNGO) was synthesized from graphene oxide (GO), urea, and iron salt via simple impregnation pyrolysis, and applied for activating peroxymonosulfate (PMS) to degrade NFX. FeNGO possessed a two-dimensional porous sheet structure and was rich in defects, nitrogen species, and active sites. Compared with the control catalyst doped with N or Fe alone, FeNGO/PMS system showed the best degradation performance with 97.7% removal of NFX after 30 min, the rate constant was 7.1 and 1.7 times than that for NGO and FeGO, respectively. Fe 3 N was the main active site of FeNGO, and it is confirmed that singlet oxygen (1O 2) and superoxide radical (O 2 •-) were the primary oxidation active species (ROS) during NFX degradation. The formation of 1O 2 came from the transformation of O 2 •- and PMS decomposition. FeNGO showed strong pH adaptability, and also exhibited stale degradation performance in saliferous water matrices. It is believed that this work will offer theoretical and practical guidance for PMS activation by non-radical pathways. [Display omitted] • The FeNGO was prepared and the Fe 3 N were the main active sites. • The FeNGO exhibited good pH flexibility and had low Fe leaching. • O 2.•- and 1O 2 were primary cause of norfloxacin degradation. • Possible degradation pathway of norfloxacin was proposed. [ABSTRACT FROM AUTHOR]

In this study microwave-assisted reduction (MrGO) and direct reduction of graphene oxide (rGO) by Ti powders were established, and the effect of the reaction conditions on the reduction were discussed. The results showed that GO can be effectively reduced by both methods, however, microwave assistance can greatly shorten the reduction time. The produced Ti ions from the reaction of Ti powder with GO were transferred to TiO 2 by hydrolysis and formed MrGO/TiO 2 and rGO/TiO 2 . They were used as adsorbents for the removal of methylene blue (MB). MrGO/TiO 2 showed a higher adsorption capacity ( q max , 845.6 mg/g) than rGO/TiO 2 ( q max , 467.6 mg/g). Investigation on the adsorption MB onto MrGO/TiO 2 was conducted and demonstrated that adsorption kinetics followed the pseudo second-order kinetics model and the adsorption isotherm was well described by the Langmuir isotherm model. The recycling of MrGO/TiO 2 was achieved by photocatalytic degradation of MB catalyzed by MrGO/TiO 2 itself. [ABSTRACT FROM AUTHOR]

Abstract: A hybrid material of graphene oxide (GO) sheets beaded with ZnO nanoparticles was prepared. The material extends over a few hundred square nanometers, in which the ZnO nanoparticles (average diameter (∼5nm)) are dispersed evenly on the GO sheet. Both the surface photovoltage or surface photocurrent intensity for the material are much stronger than for pure ZnO nanoparticles, meaning that the free charge carriers can effectively be transferred from ZnO nanoparticles to GO sheets, which can serve as a probe to monitor the electron transfer from excited ZnO to GO. Anchoring ZnO nanoparticles on two dimensional carbon nanostructures such as GO can pave a way towards the design of ordered nanostructure assemblies that can harvest light energy efficiently. [Copyright &y& Elsevier]

Abstract: In the present study, a facile method is developed for the synthesis of graphene oxide-Ag nanocomposite (GOAg). The method involves the application of in situ photochemical deposition and growth processes under certain alkaline environments in the absence of chemical reductants and surfactants. Silver nanoparticles with monodisperse size are well dispersed on the surface of graphene oxide (GO). The roles of GO and NaOH in the formation of GOAg are discussed. A corresponding formation mechanism of GOAg is proposed. Fluorescence quenching and Raman enhancement are examined as well. [Copyright &y& Elsevier]

Graphene oxide (GO) is one of the promising two-dimensional nanomaterials for the development of fluorescent aptasensors. Its limitations are related to the inevitable negative effect of GO on the fluorescence. Here this challenge was explored and solved by ssDNA adsorption on GO and centrifugal separation of GO from the ensembled solution. On this basis, a fluorescent aptasensor was constructed for the detection of staphylococcal enterotoxin A (SEA), in which GO assisted the separation of free aptamers to achieve cDNA-induced structure-switching from SEA/aptamer complex to dsDNA, and GO was added again to separate free cDNA and reduce the background signal. SYBR Green I was inserted into dsDNA as the fluorescent signal to achieve the quantitative analysis. It displayed a wide linear range (1–8000 ng/mL), low detection limit (0.899 ng/mL), and satisfactory application in milk and milk powder. Notably, the method was low-cost, general, and instructive for other two-dimensional nanomaterials. [Display omitted] • A label-free, low-background fluorescent aptasensor for staphylococcal enterotoxin A. • Graphene oxide-assisted ssDNA separation to reduce the background and interference. • The cDNA-induced structure-switching formed dsDNA and amplified the signal. • The method was low-cost, general, and instructive for two-dimensional nanomaterials. [ABSTRACT FROM AUTHOR]

Abstract: Bimetallic palladium–silver nanoparticles (NPs) supported on reduced oxide graphene (RGO) with different Pd/Ag ratios (Pd–Ag/RGO) were prepared by an easy green method which did not use any additional reducing agents or a dispersing agent. During the process, simultaneous redox reactions between AgNO3, K2PdCl4 and graphene oxide (GO) led to bimetallic Pd–Ag NPs. The morphology and composition of the Pd–Ag/RGO were characterized by transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, thermogravimetric analysis and Raman spectroscopy. Cyclic voltammetry and chronoamperometry were used to investigate the electrochemical activities and stabilities of these Pd–Ag/RGO catalysts for the electro-oxidation of methanol and ethanol in alkaline media. Among the different Pd/Ag ratios, the Pd–Ag (1:1)/RGO had the best catalytic activities and stability. So it is a promising catalyst for direct alcohol fuel cell applications. [Copyright &y& Elsevier]