Search

In this work, a sensor for quantitative detection of uric acid (UA) is successfully prepared by electrodepositing Nickel–Copper (Ni–Cu) alloy nanoparticles on poly (3,4-ethyldioxythiophene) modified nitrogen-containing grapheme (Ni–Cu/PEDOT/NGE). The anchoring of PEDOT and Cu–Ni alloy nanoparticles on NGE not only prevents the agglomeration of NGE, but also improves the catalytic activity of the composites. Ni–Cu/PEDOT/NGE shows high electrochemical performance to UA and the oxidation of UA on its interface was an action with two protons and two electrons. Under the optimized condition, the response current of the sensor is linear with UA concentration within the range of 0.1–10 μ M and 10–50 μ M. A low detection limit of 0.059 μ M at S/ N = 3 is obtained. Additionally, the fabricated electrochemical sensor with good sensitivity and selectivity to UA may be promising for practical clinical testing. Poly(3,4-ethylenedioxythiophene) and nickel–copper alloy nanoparticles are modified on nitrogen-doped graphene via electropolymerization and electrodeposition (Ni–Cu/PEDOT/NGE). The oxidation of uric acid on the interface of Ni–Cu/PEDOT/NGE is an action with two protons and two electrons. [ABSTRACT FROM AUTHOR]

Tin-based metal oxides usually suffer from severe capacity fading resulting from aggregation and considerable volume variation during the charge/discharge process in lithium ion batteries. In this work, a novel nanocomposite (MTO/N-RGO) of hollow amorphous MnSnO 3 (MTO) nanoparticles and nitrogen-doped reduced graphene oxide (N-RGO) has been designed and synthesized by a two-step method. Firstly, the nitrogen-doped graphene nanocomposite (MTO/N-RGO-P) with MnSn(OH) 6 crystal nanoparticles was synthesized by a facile solvothermal method. Subsequently, the MTO/N-RGO nanocomposite was obtained through the post heat treatment of MTO/N-RGO-P. The designed heterostructure and well-combination of the hollow amorphous MTO and N-RGO matrix can accelerate the ionic and electronic transport, and simultaneously accommodate the aggregation and volume variation of MTO nanoparticles during the lithiation–delithiation cycles. The as-prepared hybrid of MTO and N-RGO (MTO/N-RGO) exhibits a high reversible capacity of 707 mAh g −1 after 110 cycles at 200 mA g −1 , superior rate capability, and long-term cyclic life with high capacity of 610 mAh g −1 over 1000 cycles at 400 mA g −1 . Superior capacity retention of 97.3% over 1000 cycles was obtained. This work opens new opportunities to fabricate the high-performance electrode materials with heterostructure for lithium storage systems, especially for novel multi-metal oxide based nanocomposites with high cycling stability. [ABSTRACT FROM AUTHOR]