Search

Using Si as anode materials for Li-ion batteries remain challenging due to its morphological evolution and SEI modification upon cycling. The present work aims at developing a composite consisting of carbon-coated Si nanoparticles (Si@C NPs) intimately embedded in a three-dimensional (3D) graphene hydrogel (GHG) architecture to stabilize Si inside LiB electrodes. Instead of simply mixing both components, the novelty of the synthesis procedure lies in the in situ hydrothermal process, which was shown to successfully yield graphene oxide reduction, 3D graphene assembly production, and homogeneous distribution of Si@C NPs in the GHG matrix. Electrochemical characterizations in half-cells, on electrodes not containing additional conductive additive, revealed the importance of the protective C shell to achieve high specific capacity (up to 2200 mAh.g−1), along with good stability (200 cycles with an average Ceff > 99%). These performances are far superior to that of electrodes made with non-C-coated Si NPs or prepared by mixing both components. These observations highlight the synergetic effects of C shell on Si NPs, and of the single-step in situ preparation that enables the yield of a Si@C-GHG hybrid composite with physicochemical, structural, and morphological properties promoting sample conductivity and Li-ion diffusion pathways. [ABSTRACT FROM AUTHOR]

Abstract Chemically tuned pillared graphene structures show ability to limit restacking of graphene sheets for electrochemical energy storage in SCs. A comprehensive electrochemical characterization using various ion sizes allowed identification of ion-sieving in the cross-linked galleries of reduced pillared graphene materials (RPs). The access to the cross-linked galleries, which provide additional ion sorption sites, offered slightly increased capacitances in RPs compared to completely restacked sheets in reduced graphene oxide (RGO). We performed electrochemical impedance analyses on RPs and RGO to understand the ion transport inside the cross-linked graphene galleries. RGO adsorbs ions in the inter-particle micro/meso pores and the ion access to such sites from the bulk electrolyte occurs with relative ease. RPs sieve ions into their inter-layer gallery pores based on effective ion sizes and the ion transport process is resistive compared to RGO. A control study using 3D pillared graphene hydrogel with improved macro porosity assigns this resistive behavior and the moderate capacitances to limited ion access to the active sites due to excess number of pillars. The obtained results on the ion transport dynamics between graphene layers provide perspectives towards further optimization of these graphene materials for SCs. Graphical abstract Ion transport inside the inter-layer galleries of pillared graphene materials is impeded by the pillars. Image 1 [ABSTRACT FROM AUTHOR]

Supercapacitors offer high power densities but require further improvements in energy densities for widespread commercial applications. In addition to the conventional strategy of using large surface area materials to enhance energy storage, recently, matching electrolyte ion sizes to material pore sizes has been shown to be particularly effective. However, synthesis and characterization of materials with precise pore sizes remain challenging. Herein, we propose to evaluate the layered structures in graphene derivatives as being analogous to pores and study the possibility of ion sieving. A class of pillared graphene based materials with suitable interlayer separation were synthesized, readily characterized by X-ray diffraction, and tested in various electrolytes. Electrochemical results show that the interlayer galleries could indeed sieve electrolyte ions based on size constrictions: ions with naked sizes that are smaller than the interlayer separation access the galleries, whereas the larger ions are restricted. These first observations of ion sieving in pillared graphene-based materials enable efficient charge storage through optimization of the d-spacing/ion size couple. [ABSTRACT FROM AUTHOR]

The interfacing of polyoxometalates and graphene can be considered to be an innovative way to generate hybrid structures that take advantage of the properties of both components. Polyoxometalates are redox-sensitive and photosensitive compounds with high temperature stability (up to 400 °C for some), showing tunable properties depending on the metal incorporated inside the complex. Graphene has a unique electronic band structure combined with good material properties for electrical and optical applications. The spontaneous, rather than electrochemical, functionalization of epitaxial graphene on SiC with Keggin phosphomolybdate derivative TBA3[PMo11O39{Sn(C6H4)CC(C6H4)N2}] (named KMoSn[N2+]) bearing a phenyl diazonium unit is investigated. Graphene decoration is evidenced by means of AFM, Raman, XPS, and cyclic voltammetry, indicating a successful immobilization of the polyoxomolybdate. The covalent bonding of the polyoxometalate to the graphene substrate can be deduced from the appearance of a D band in the Raman spectra and from the loss of mobility in the electrical conduction. High-resolution XPS spectra reveal an electron transfer from the graphene to the Mo complex. The comparison of charge-carrier density measurements before and after grafting supports the p-type doping effect, which is further evidenced by work function UPS measurements. [ABSTRACT FROM AUTHOR]