Search

The terahertz stealth and shielding performance of a new type of two-dimensional material, borophene, has been studied theoretically and experimentally. Studies have shown that borophene materials have good terahertz stealth and shielding properties. First-principles calculations show that compared with single-layer borophene, few-layer borophene has good terahertz stealth and shielding performance in the range of 0.1~2.7 THz. In the range of 2~4 layers, the terahertz stealth and shielding performance of few-layer borophene increases with the increase of the number of layers. The finite element simulation calculation results also confirmed this point. Using the few-layer borophene prepared by our research group as a raw material, a PDMS composite was prepared to verify the terahertz stealth and shielding performance of the few-layer borophene. In the ultra-wide frequency range of 0.1~2.7 THz, the electromagnetic shielding effectiveness (EMI SE) of the PDMS material mixed with few-layer borophene can reach 50 dB, and the reflection loss (RL) can reach 35 dB. With the concentration of few-layer borophene increasing, the terahertz stealth and shielding effectiveness of the material is enhanced. In addition, the simultaneous mixing of few-layer borophene and few-layer graphene will make the material exhibit better terahertz stealth and shielding performance compared with mixing separately. [ABSTRACT FROM AUTHOR]

Graphene shows great potential applications in functional coating, electrodes, and ultrasensitive sensors, but high-yield and scalable preparation of few-layer graphene (FLG) by mechanical exfoliation method is still a formidable challenge. In this work, a novel two-step method for high-yield preparation of FLG is developed by combining resonance ball milling and hydrothermal treatment. During the resonance ball milling process, the utilization of magnetic Fe3O4 nanoparticles as a new "particle wedge" is beneficial to facilitate fragment and delamination of graphitic layers. In addition, further hydrothermal treatment can enhance ball milling product (BMP) exfoliation because of the shear force driven by the Brownian motion of various molecules at high temperature and high pressure. As expected, the two-step method can have high exfoliation efficiency up to 92% (≤10 layers). Moreover, the FLG nanosheet ink can easily achieve the formation of FLG coatings on the surface of various substrates, resulting in good electrical conductivity, which possesses potential applications in various fields including functional coating, energy storages, and electrochemical sensors, etc. Our work provides a new-fashioned strategy for mechanical large-scale production of graphene. [ABSTRACT FROM AUTHOR]