Search

In the first part of this paper, the status of the 140-GHz continuously operated gyrotrons with an output power of 1 MW for the stellarator Wendelstein 7-X will be described. With the first series tube, an output power of 1000 kW has been achieved in short pulse operation (milliseconds) with an electron beam current of 40 A, and of 1150 kW at 50 A. With a pulse length of 3 min limited by the available high-voltage (HV) power supply, an output power of 920 kW at an electron beam current of about 40 A with an efficiency of 45% and a mode purity of 97.5% has been obtained. At a reduced beam current of 29 A, an output power of 570 kW was measured with a pulse length of 1893 s without significant increase in tube pressure. The energy content of this pulse is almost 1.1 GJ. For the next fusion plasma device, International Thermonuclear Experimental Reactor (ITER), gyrotrons with a higher output power of about 2 MW are desirable. In short-pulse experiments, the feasibility of the fabrication of coaxial cavity gyrotrons with an output power up to 2-MW, continuous wave (CW), has been demonstrated, and the information necessary for a technical design has been obtained. The development of a long-pulse 2-MW coaxial cavity gyrotron started within a European cooperation. In parallel to the design and fabrication of an industrial prototype gyrotron, a short-pulse preprototype gyrotron has been operated to verify the design of critical components. An output power of 1.2 MW with an efficiency of 20% has been achieved. The development of frequency tunable gyrotrons operating in the range from 105 to 140 GHz for stabilization of current driven plasma instabilities in fusion plasma devices (neoclassical tearing modes) is another task in the development of gyrotrons at the Forschungszentrum Karlsruhe. [ABSTRACT FROM AUTHOR]

High-frequency gyrotrons with high output power are mainly used for microwave heating and current drive in plasmas for thermonuclear fusion. The development of high-power gyrotrons in continuous wave (CW) operation has been In progress for several years in a joint collaboration between different European research centers and an industrial partner. The status of the development of the 140-GHz continuously operating gyrotrons with an output power of 1 MW for the stellarator Wendelstein 7-X will be described. An output power of 890 kW has been achieved with a pulse length of 3 mm. limited by the available high-voltage power supply at an electron beam current of 40 A. At a reduced beam current of 27 A , an output power of 540 kW was measured with *1 pulse length of 939 s. For the next fusion plasma device international thermonuclear experimental reactor, gyrotrons with a higher output power of about 2 MW are desirable. In short-pulse experiments, the feasibility of fabrication of coaxial cavity gyrotrons with an output power up to 2 MW, CW, has been demonstrated, and the information necessary for a technical design has been obtained. An output power of 2.2 MW has been reached in stable operation (without mode competition). At the nominal output power of 1.5 MW an efficiency of 48% could be obtained with single-stage depressed collector. The development of frequency tunable gyrotrons operating in the range from 105 to 140 GHz for stabilization of current driven plasma instabilities in fusion plasma devices (neoclassical tearing modes) is another task in the development of gyrotrons at the Forschungszentrum Karlsruhe. [ABSTRACT FROM AUTHOR]