Search

To address the problem of ever-increasing oily wastewater management, due to its directional liquid transport property, membranes with asymmetric wettability can be effectively used for emulsion separation. This study reports the synthesis of electrospun polymer–clay nanocomposite nanofibers, using co-polyamide polymer (COPA) and halloysite nanotubes (HA) as filler. The influence of clay content on the morphological, thermal and dielectric properties of the polymer composite nanofiber was investigated comprehensively to address the material characteristics of the developed system. The surface structure analysis and contact angle measurements of the electrospun composite nanofibers confirms the change in surface roughness and wettability when the fillers are added to the polymer. The porosity of the composite electrospun nanofiber membrane was found to be 85% with an oil adsorption capacity of 97% and water permeability of 6265 L/m2 h. Furthermore, the asymmetric wettability-driven oil/water emulsion separation abilities of the as-synthesized membranes shows that the separation efficiency of the composite fiber membrane is 10% improved compared to that of the neat fiber membrane, with improved separation time. [ABSTRACT FROM AUTHOR]

Environmental remediation using green approaches for addressing various pollution-related issues, especially water pollution, is in high demand. Here, we designed an environmentally friendly, low-cost, and stable sodium alginate–halloysite clay composite aerogel (SAHA) for oil/water separation via a two-step synthesis procedure, including ionic crosslinking and freeze-drying. The as-prepared SAHA aerogels were characterized in detail by scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray diffraction (XRD), and Fourier transformation infrared (FT-IR) spectroscopy. Characterization of the SAHA aerogels revealed a three-dimensional porous microstructure with uniformly dispersed halloysite nanotubes (HA) within the alginate matrix. The elemental composition of the hydrogels investigated using energy dispersive X-ray spectrometry (EDX) revealed the presence of minerals, such as magnesium, sodium, aluminum, and silicon in the SAHA aerogels. The presence of a hydrophilic alginate matrix combined with these unique morphological characteristics resulted in SAHA aerogels with underwater oleophobicity and excellent oil/water separation efficiency (up to 99.7%). The ease of fabrication, excellent oil/water separation, and multiple performances make the SAHA aerogel an interesting candidate for practical applications in water recycling. [ABSTRACT FROM AUTHOR]