Search

In recent years, due to the large spread of power electronics converters onboard shipboard power systems (SPSs), harmonic contamination became an inherent problem. Moreover, as the SPSs are mostly operating in an islanded mode with a limited rating of the generators that feed heavy variable loads, voltage stability issues became a challenge as well. To address these issues, implementing PWM-based FACTS devices using IGBTs such as the active power filters may not be very practical for high-power SPSs due to their limited rated powers, high implementation cost, and high losses. The passive power filters (PPFs) and fixed capacitor–thyristor controlled reactors (FC-TCR) can be effective alternatives due to their capability to operate in high-power applications, smaller losses and, lower cost. The aim of this article is to provide more in-depth analytical investigations to evaluate and compare the behavior of the PPFs and the FC-TCR compensator in reducing the harmonics and enhancing the voltage stability concurrently of high-power SPSs. In addition, details of the voltage stability concept are addressed to visualize the potential risk of the voltage collapse. Besides, the modeling of the FC-TCR and design of the closed-loop control algorithm to ensure voltage stability is conducted. Via intensive simulation studies of a practical ship, which are carried out in MATLAB/Simulink environment, it has been demonstrated that the FC-TCR based on the proposed design can enhance the power quality and voltage stability of SPSs better than traditional PPFs filters. [ABSTRACT FROM AUTHOR]

Addressing power quality issues in shipboard microgrids (SMs), which are mainly attributable to the increased installation of power converters, has received much attention recently. To this end, static VAR compensators, such as thyristor-switched capacitors and fixed capacitors-thyristor controlled reactors (FCs-TCRs), can be effective solutions. Controlling these compensators, however, is not a trivial task as it involves sophisticated operations, especially estimating the firing angle, which should be carried out based on some nonlinear equations. This article aims to propose the application of some simple yet numerically efficient algorithms based on bisection, Newton–Raphson, false position, and secant methods for estimating the firing angle of the FC-TCR. The effectiveness and robustness of these algorithms are demonstrated via modeling of the FC-TCR with the electrical power system of a practical hybrid ferry under MATLAB/Simulink environment, where the results proved that the enhanced power quality issues respect the IEC standards 61000-4-7/30. Furthermore, an experimental setup consists of a digital signal processor and a programmable source is used to demonstrate that these techniques can be effectively applied in real-time applications. [ABSTRACT FROM AUTHOR]

This paper proposes a cost-effective compensator to suppress harmonics and compensate the power factor of all-electric shipboard power systems (SPSs). This compensator, which is based on a fixed capacitor-thyristor controlled reactor (FC-TCR), behaves as a low-pass filter and therefore can reject both low and high-order harmonics. Moreover, the FC-TCR compensator is featured by the low switching losses; hence, it can effectively be implemented for low and medium voltage applications. The design of the filter is detailed via equivalent lossy circuits, which exhibit the mechanism of the harmonic mitigation. Furthermore, theoretical analyses and mathematical developments are suggested to enhance the filtering performance. Besides, details of the Fixed-Point iteration technique which is applied to extract the firing angle of the TCR are conducted. A practical SPS is selected to ensure and demonstrate the performance of proposed methodology via thorough simulations under MATLAB/Simulink environment. The obtained results verify the theoretical analyses and confirm the effectiveness of proposed solution. [ABSTRACT FROM AUTHOR]