Search

In this work, a multilevel 42-sided polygonal space vector structure for suppression of lower order harmonics for open-end induction motor (OEIM) drive applications is proposed. The proposed power circuit topology consists of two inverters feeding an OEIM from either side. The main inverter fed with a single dc-link providing active power for motoring operation is switched at low switching frequency. The secondary inverter fed with a capacitive supply is switched at high frequency to suppress lower order harmonics upto 39th order, up to the base speed of operation allowing maximum utilization of the dc-link. The advantages of lower order harmonic suppression in motor phase voltage, for polygonal space vector structures, are combined with multilevel inverter topology. This offers various advantages like multilevel operation with low inverter switching for the main power delivery inverter and harmonic suppression throughout the modulation range. The low switching frequency primary inverter generates harmonics of the order $6*k \pm 1$ , where $k = 1, 2, 3,{\ldots }$. The harmonics are suppressed by the capacitor-fed secondary inverter, which supplies only reactive power for suppression of lower order harmonics in motor phase voltage. Use of a single dc-link facilitates four-quadrant operation of the inverter. The proposed scheme is validated for steady-state and dynamic performance by experimental results. [ABSTRACT FROM AUTHOR]

The cost reduction of power-electronic devices, the increase in their reliability, efficiency, and power capability, and lower development times, together with more demanding application requirements, has driven the development of several new inverter topologies recently introduced in the industry, particularly medium-voltage converters. New more complex inverter topologies and new application fields come along with additional control challenges, such as voltage imbalances, power-quality issues, higher efficiency needs, and fault-tolerant operation, which necessarily requires the parallel development of modulation schemes. Therefore, recently, there have been significant advances in the field of modulation of dc/ac converters, which conceptually has been dominated during the last several decades almost exclusively by classic pulse-width modulation (PWM) methods. This paper aims to concentrate and discuss the latest developments on this exciting technology, to provide insight on where the state-of-the-art stands today, and analyze the trends and challenges driving its future. [ABSTRACT FROM PUBLISHER]

This article proposes an inverter topology for the first time for suppression of all lower order harmonics (5th, 7th, 11th, 13th, etc.) up to 39th harmonic. The lower order harmonic suppression is achieved by switching the 42-sided polygonal vectors, which eliminates harmonics in phase voltage without using a passive LC filtering technique. The power circuit topology uses a single dc-link supply for the primary inverter. The secondary inverter is fed with a capacitive supply. A novel topology is proposed for the dense six-level secondary inverter. The lower order harmonics in phase voltage are suppressed using the secondary inverter, which acts like a switched-capacitive filter. This article also proposes a novel capacitor voltage-balancing scheme for the first time, which achieves voltage balancing for secondary inverter capacitors. The voltages of secondary inverter capacitors are balanced using the power balance relationship between the primary inverter and the motor load. An experimental study of the topology and the capacitor-balancing scheme is presented for the validation of proposed scheme. [ABSTRACT FROM AUTHOR]

Modular converters such as the multilevel cascaded H-bridge (CHB) are an attractive option for multiple applications mainly because of inherent modularity and fault-tolerant operation. This article is focused on the CHB converter operating with unbalanced conditions (different dc voltages and/or modulation indexes). Under these circumstances, applying the conventional control and modulation strategies, the output voltage harmonic spectrum is degraded. In this article, a generalized variable-angle phase-shifted pulsewidth modulation (PS-PWM) technique for CHB converters with a large number of power modules (> 3) is presented. The method considers all possible cells’ combinations to form groups and assigns the role of each cell in the group. This cell role defines the identifier of the cell in the variable-angle PS-PWM technique. In the steady state, in each group of cells, the harmonic distortion of the CHB output voltage located at twice the carrier frequency ƒc is eliminated, while the distortion at 4ƒc is also diminished. Experimental results show how the proposed technique achieves superior harmonic performance without introducing any significant disadvantage. [ABSTRACT FROM AUTHOR]

Multilevel cascaded H-bridge (CHB) converters are an attractive solution for multiple applications like flexible ac transmission systems and solid-state smart transformers, among others. This article is focused on a CHB working with unbalanced conditions per cell (different cell dc voltages and/or cell voltage references). In this scenario, the phase-shifted pulsewidth modulation (PS-PWM) technique produces a harmonic distortion around twice the carrier frequency and its multiples in the CHB output voltage. In this article, a generalized variable-angle PS-PWM method is presented in order to mitigate this drawback improving the CHB output voltage harmonic spectrum. The proposed method is based on applying a mathematical search algorithm to determine the phase displacement angles to be applied to the PS-PWM technique. Experimental results show how this objective is achieved without introducing any disadvantage in the CHB operation. The method can be applied to CHB with any number of cells. [ABSTRACT FROM AUTHOR]

Cascaded H-bridge converter (CHB) is a multilevel topology that is a well-suited solution for multiple applications such as flexible ac transmission systems or motor drives. This paper is focused on a CHB where the cells present an aging mismatch. This can be caused by the maintenance operation which forces the replacement of some damaged cells of the converter with new or repaired ones. In this paper, a new improved approach of the active thermal control (ATC) of the CHB using discontinuous pulsewidth modulation (PWM) (D-PWM) is presented. The D-PWM technique is used to reduce the power losses of one cell reducing its average temperature in order to increase its remaining lifetime. However, the combination of D-PWM with traditional phase-shifted PWM (PS-PWM) introduces high harmonic distortion in the output voltage of the CHB converter at twice the carrier frequency. A detailed harmonic distortion analysis of the CHB output voltage when the D-PWM based ATC is active is presented. From this analysis, a modification of the traditional PS-PWM is derived to eliminate the harmonic distortion at twice the carrier frequency. Experimental results show how the ATC using D-PWM is achieved whereas the harmonic distortion around twice the carrier frequency is eliminated. [ABSTRACT FROM AUTHOR]

This paper proposes generation of a 15-level (14 concentric) dodecagonal voltage space vector structure (DVSVS) for a star connected induction motor drive. The proposed multilevel DVSVS is obtained by cascading two inverters, namely a primary and secondary inverter. The primary inverter is a five-level (5L) structure formed by stacking two three-level flying capacitors with individual reduced dc sources and the secondary inverter is also a 5L structure formed by cascading two capacitor-fed cascaded H-bridges (CHB). The active power is supplied by the primary inverter, while the secondary inverter acts as switched capacitor harmonics filter, and capacitors in the secondary inverter are balanced naturally irrespective of load power factor for entire modulation index. The high-voltage dc supply fed primary inverter is operated in quasi-square wave mode, while the high frequency switching is applied to low voltage CHBs, thus, reducing the overall switching loss. The proposed scheme gives the advantages of both DVSVS and multilevel structure, thus, making it one of the solutions for battery or stacked dc-fed applications. The paper also presents the experimental results as well as comparison study with the existing topologies to support the advantages of proposed scheme. [ABSTRACT FROM AUTHOR]

Multilevel cascaded H-bridge converters have become a mature technology for applications where high-power medium ac voltages are required. Normal operation of multilevel cascaded H-bridge converters assumes that all power cells have the same dc voltage, and each power cell generates the same voltage averaged over a sampling period using a conventional phase-shifted pulse width modulation (PWM) technique. However, this modulation method does not achieve good results under unbalanced operation per H-bridge in the power converter, which may happen in grid-connected applications such as photovoltaic or battery energy storage systems. In the paper, a simplified mathematical analysis of the phase-shifted PWM technique is presented. In addition, a modification of this conventional modulation method using variable shift angles between the power cells is introduced. This modification leads to the elimination of harmonic distortion of low-order harmonics due to the switching (triangular carrier frequency and its multiples) even under unbalanced operational conditions. The analysis is particularized for a three-cell cascaded H-bridge converter, and experimental results are presented to demonstrate the good performance of the proposed modulation method. [ABSTRACT FROM PUBLISHER]

This paper presents a hybrid selective harmonic mitigation (SHM)-selective harmonic elimination (SHE) switching technique based on pulse-amplitude modulation (PAM) concept. It has been applied on a four-leg neutral-point-clamped (NPC) inverter to eliminate and mitigate more harmonic orders than recently proposed hybrid SHM-SHE-pulse width modulation (PWM) method while generating switching pulses at the same frequency. In conventional SHE and SHM techniques, equations are solved to attain the switching angles. Regarding the PAM, value of inverter dc voltage can be considered as an additional degree of freedom by which the flexibility of such techniques would be increased maintaining the switching frequency. In the proposed SHM-SHE-PAM, the conventional equations are reformulated to obtain constant switching angles for a vast range of modulation index (ma) applied on a four-leg NPC inverter. Switching pulses of the three-phase legs and the fourth leg are calculated to mitigate the nontriplen harmonics and eliminate the triplen ones, respectively. Due to the unique switching angles valid in the whole range for ma, the calculation time and volume (storage capacity) are significantly reduced leading to a simpler controller implementable on a low-risk and cheap AVR chip. Experimental tests’ results of a four-leg NPC inverter as UPS application prove the good dynamic performance and accuracy of the proposed implemented switching technique in producing associated pulses for the inverter switches at very low frequency to mitigate/eliminate undesired harmonic orders from the output phase/line voltage waveforms without using bulky filters. [ABSTRACT FROM AUTHOR]

Multilevel converters have received increased interest recently as a result of their ability to generate high quality output waveforms with a low switching frequency. This makes them very attractive for high-power applications. A cascaded H-bridge converter (CHB) is a multilevel topology which is formed from the series connection of H-bridge cells. Optimized pulse width modulation techniques such as selective harmonic elimination or selective harmonic mitigation (SHM-PWM) are capable of preprogramming the harmonic profile of the output waveform over a range of modulation indices. Such modulation methods may, however, not perform optimally if the dc links of the CHB are not balanced. This paper presents a new SHM-PWM control strategy which is capable of meeting grid codes even under nonequal dc link voltages. The method is based on the interpolation of different sets of angles obtained for specific situations of imbalance. Both simulation and experimental results are presented to validate the proposed control method. [ABSTRACT FROM PUBLISHER]