Search

Per- and polyfluoroalkyl substances (PFAS), a highly persistent and potentially toxic class of chemicals, are added to cosmetics to increase their durability and water resistance. To assess this potential health and environmental risk, 231 cosmetic products purchased in the U.S. and Canada were screened for total fluorine using particle-induced gamma-ray emission spectroscopy. Of the eight categories tested, foundations, mascaras, and lip products had the highest proportion of products with high total fluorine ≥0.384 μg F/cm2. Twenty-nine products including 20 with high total fluorine concentrations were analyzed using targeted LC-MS/MS and GC-MS. PFAS concentrations ranged from 22–10,500 ng/g product weight, with an average and a median of 264 and 1050 ng/g product weights, respectively. Here, 6:2 and 8:2 fluorotelomer compounds, including alcohols, methacrylates, and phosphate esters, were most commonly detected. These compounds are precursors to PFCAs that are known to be harmful. The ingredient lists of most products tested did not disclose the presence of fluorinated compounds exposing a gap in U.S. and Canadian labeling laws. The manufacture, use, and disposal of cosmetics containing PFAS are all potential opportunities for health and ecosystem harm. Given their direct exposure routes into people, better regulation is needed to limit the widespread use of PFAS in cosmetics., Environmental Science & Technology Letters, 8 (7), ISSN:2328-8930

This commentary presents a scientific basis for managing as one chemical class the thousands of chemicals known as PFAS (per- and polyfluoroalkyl substances). The class includes perfluoroalkyl acids, perfluoroalkylether acids, and their precursors; fluoropolymers and perfluoropolyethers; and other PFAS. The basis for the class approach is presented in relation to their physicochemical, environmental, and toxicological properties. Specifically, the high persistence, accumulation potential, and/or hazards (known and potential) of PFAS studied to date warrant treating all PFAS as a single class. Examples are provided of how some PFAS are being regulated and how some businesses are avoiding all PFAS in their products and purchasing decisions. We conclude with options for how governments and industry can apply the class-based approach, emphasizing the importance of eliminating non-essential uses of PFAS, and further developing safer alternatives and methods to remove existing PFAS from the environment., Environmental Science & Technology Letters, 7 (8), ISSN:2328-8930

Sources of exposure to per- and polyfluorinated alkyl substances (PFAS) include food, water, and given that humans spend typically 90% of our time indoors, air and dust. Quantifying PFAS prevalent indoors, such as neutral, volatile PFAS, and estimating their exposure risk to humans is thus important. To accurately measure these compounds indoors, polyethylene (PE) sheets were employed and validated as passive detection tools, and analyzed by gas chromatography-mass spectrometry. Air concentrations were compared to dust and carpet concentrations reported elsewhere. Partitioning between PE sheets of different thicknesses suggested that interactions of the PEs with the compounds are occurring by absorption. Volatile PFAS, specifically fluorotelomer alcohols (FTOHs), were ubiquitous in indoor environments. For example, in carpeted Californian kindergarten classrooms, 6:2 FTOH dominated with concentrations ranging from 9-600 ng m(−3), followed by 8:2 FTOH. Concentrations of volatile PFAS from air, carpet and dust were closely related to each other, indicating that carpets and dust are major sources of FTOHs in air. Nonetheless, air posed the largest exposure risk of FTOHs and biotransformed perfluorinated alkyl acids (PFAA) in young children. This research highlights inhalation of indoor air as an important exposure pathway and the need for further reduction of precursors to PFAA.

Perfluoroalkyl acids (PFAAs) are a class of organic contaminants notable for their extreme persistence. The unique chemical properties of these compounds make them difficult to remove from water using most standard water treatment techniques. To gain insight into the possibility of remediating contaminated groundwater by in situ chemical oxidation with heat-activated persulfate, PFAA removal and the generation of transformation products were evaluated under laboratory conditions. Solution pH had a strong influence on the removal of perfluorooctanoic acid (PFOA), resulting in its transformation into shorter-chain perfluorocarboxylic acids at pH values below 3. The presence of chloride and aquifer sediments decreased the efficiency of the process by less than 25% under conditions likely to be encountered in drinking water aquifers. Perfluorooctane sulfonate (PFOS) was not transformed by heat-activated persulfate under any of the conditions tested. Despite challenges related to the need to manipulate aquifer pH, the possible generation of undesirable short-chain perfluorinated carboxylic acids (PFCAs) and chlorate, and metals mobilization, heat-activated persulfate may be a useful treatment technology for sites contaminated with perfluorinated carboxylic acids and fluorotelomer-based compounds, including those used in current-generation aqueous film-forming foams.

Drinking water contamination with poly- and perfluoroalkyl substances (PFASs) poses risks to the developmental, immune, metabolic, and endocrine health of consumers. We present a spatial analysis of 2013–2015 national drinking water PFAS concentrations from the U.S. Environmental Protection Agency’s (US EPA) third Unregulated Contaminant Monitoring Rule (UCMR3) program. The number of industrial sites that manufacture or use these compounds, the number of military fire training areas, and the number of wastewater treatment plants are all significant predictors of PFAS detection frequencies and concentrations in public water supplies. Among samples with detectable PFAS levels, each additional military site within a watershed’s eight-digit hydrologic unit is associated with a 20% increase in PFHxS, a 10% increase in both PFHpA and PFOA, and a 35% increase in PFOS. The number of civilian airports with personnel trained in the use of aqueous film-forming foams is significantly associated with the detection of PFASs above the minimal reporting level. We find drinking water supplies for 6 million U.S. residents exceed US EPA’s lifetime health advisory (70 ng/L) for PFOS and PFOA. Lower analytical reporting limits and additional sampling of smaller utilities serving

The groundwater remediation industry continues to progress towards less expensive, more sustainable in situ remedies. However, in situ treatment requires site-specific performance data that can be difficult or impossible to obtain using conventional laboratory microcosm studies. To improve the representativeness of laboratory scale treatability studies, and aid in remedial technology implementation, we developed the In Situ Microcosm Array (ISMA). This autonomous diagnostic device enables the deployment of 10 flow-through sediment columns within a standard 10-cm groundwater-monitoring well. Suspended at the desired aquifer depth, the fully encapsulated ISMA meters groundwater directly from the aquifer to microcosms containing competing remedial technologies. Field demonstrations of the instrument were performed in two aquifers contaminated, respectively, with trichloroethylene and hexavalent chromium, and with perchlorate. A cost assessment positions ISMA deployment costs within the range of conventional laboratory treatability studies. Results demonstrate the ISMA’s utility to perform cost-effective, high-throughput, screenings of multiple intervention strategies in the field, without impacting the subsurface environment examined.

The drinking water of more than six million Americans in numerous communities has been found to contain highly fluorinated chemicals at concentrations of concern. Certain of these chemicals, including perfluorooctanoic acid and perfluorooctane sulfonic acid, are known to be persistent, bioaccumulative, and associated with adverse health outcomes in humans and animal models. The possible health impacts of exposure to highly fluorinated chemicals are of great concern to communities whose water has been impacted. Community members want information, and are asking for biomonitoring, exposure pathway analysis, and health studies. Governmental agencies are striving to deal with these multiple concerns in the face of information and resource constraints. We propose the development of a high-level research strategy to maximize what can be learned about health effects of highly fluorinated chemicals and methods to reduce or eliminate exposure. We suggest coordinating the research across multiple communities for greater statistical power. If implemented, such a strategy could help to generate information and evidence integration to enable regulatory decision making and contribute to reducing future exposures.