Search

This paper proposes novel microencapsulated phase change material slurries (MPCSs) as both the energy storage media and heat transfer fluids. The flow and heat transfer characteristics of MPCSs have been experimentally investigated. A series of experiments were conducted in laminar, transition and turbulent flow conditions for MPCSs in a circular tube under constant heat flux, respectively. The results of pressure drop measurements showed that transportation costs of slurries were close to pure water. The heat transfer experiments demonstrated that proposed MPCSs could enhance the heat transfer performance as the heat transfer fluids for thermal system applications in comparison with pure water. The average enhancement percentages of the Nusselt number were 23.9%, 20.5% and 9.1% for MPCS of 5 wt%, and enhancement of the Nusselt number was achieved when phase change material in the microcapsules were in solid, solid/liquid and liquid states, respectively. However, heat transfer enhancement of MPCS depends on the following combination factors: the slurry concentration, the flow rate, the pumping power and the heating rate. Importantly, the phase change process must be carefully controlled in the heat transfer test section with above combination factors in order to take advantages of MPCS over pure water. [ABSTRACT FROM AUTHOR]

• The mathematical model can accurately predict the melting heat transfer process of PCMs. • The Rayleigh number increased with the heat flux, and the higher the heat flux, the larger the amplitude. • Increasing the heat flux improved the integrated heat transfer coefficient and thermal storage performance of the CPCMs. • Conduction was the primary heat transfer mechanism; however, the proportion of natural convection increased with the heat flux. To investigate the effect of heat flux on the enhanced heat transfer in phase change materials (PCMs) composed of copper metal foam (CMF) and paraffin wax (PX), a semi-cylindrical visualized heat storage device with a varied heat flux of 7.3 kW/m2, 8.5 kW/m2, 9.7 kW/m2, and 10.9 kW/m2 was established in this paper. Moreover, a 3-D mathematical model of composite phase change materials (CPCMs) was established using hybrid grid to study the temperature distribution, imbalance effect, flow, heat transfer mechanisms, and heat storage performance during the melting process. The results showed that the melting time of the CPCMs decreased as the heat flux increased. Compared with a heat flux of 7.3 kW/m2, the melting time was shortened by 10.05 %, 20.71 %, and 27.21 %, respectively. In addition, the Rayleigh number (Ra) increased with the increase in heat flux, and the amplitudes of Ra were 1.45×108,1.54×108,1.61×108, and 1.74×108, respectively, which indicated that the higher the heat flux, the larger the amplitudes. Moreover, the heat transfer mechanism during the melting process was dominated by conduction; however, with the increase in heat flux, the maximum flow velocity of the liquid paraffin increased, which caused the proportion of natural convection to increase from 27.80 % to 31.30 %. Hence, the integrated heat transfer coefficient of CPCMs increased from 5.69 W/(m·K) to 5.81 W/(m·K). However, the temperature imbalance effect of the CPCMs was exacerbated, as evidenced by the increased maximum temperature difference in the vertical direction of the center of the CPCMs from 24.7 K to 35.6 K. Besides, the heat storage performance was enhanced. Compared with a heat flux of 7.3 kW/m2, the heat storage capacities of the CPCMs increased by 4.21%, 9.46%, and 12.66 % with increasing heat flux, and the heat storage rates of the CPCMs increased by 15.3 %, 34.9 %, and 52.3 %, respectively. Furthermore, the relative error of the overall melting time was 3.4 %, indicating that the model provided reasonable predictions. [ABSTRACT FROM AUTHOR]