Search

Cooling in the industry sector contributes significantly to the peak demand placed on an electrical utility grid. New electricity tariff structures include high charges for electricity consumption in peak hours which leads to elevated annual electricity costs for high-demanding consumers. Demand side management (DSM) is a promising solution to increase the energy efficiency among customers by reducing their electricity peak demand and consumption. In recent years, researchers have shown an increased interest in utilizing DSM techniques with thermal energy storage (TES) and solar PV technologies for peak demand reduction in industrial and commercial sectors. The main objective of the present study is to address the potential for applying optimization-based time-of-use DSM in the industry sector by using cold thermal energy storage and off-grid solar PV to decrease and shift peak electricity demands and to reduce the annual electricity consumption costs. The results show that when cold thermal energy storage and solar PV are coupled together higher annual electricity cost savings can be achieved compared to using these two technologies independently. Additionally, considerable reductions can be seen in electricity power demands in different tariff periods by coupling thermal energy storage with off-grid solar PV. [ABSTRACT FROM AUTHOR]

Globally, a considerable amount of energy is consumed by the building sector. The building envelope can highly influence the energy consumption in buildings. In this regard, innovative technologies such as thermal energy storage (TES) can help to boost the energy efficiency and to reduce the CO 2 emissions in this sector. The use of phase change materials (PCM), due to its high heat capacity, has been the centre of attention of many researchers. A considerable number of papers have been published on the application of PCM as passive system in building envelopes. Researches have shown that choosing the PCM melting temperature in different climate conditions is a key factor to improve the energy performance in buildings. In the present paper, a simulation-based optimization methodology will be presented by coupling EnergyPlus and GenOpt with an innovative enthalpy-temperature (h-T) function to define the optimum PCM peak melting temperature to enhance the cooling, heating, and the annual total heating and cooling energy performance of a residential building in various climate conditions based on Köppen-Geiger classification. Results show that in a cooling dominant climate the best PCM melting temperature to reduce the annual energy consumption is close to the maximum of 26 °C (melting range of 24–28 °C), whereas in heating dominant climates PCM with lower melting temperature of 20 °C (melting range of 18–22 °C) yields higher annual energy benefits. Moreover, it was found that the proper selection of PCM melting temperature in each climate zone can lead to notable energy savings for cooling energy consumption, heating energy consumption, and total annual energy consumption. [ABSTRACT FROM AUTHOR]

Relocatable, transportable or off-site constructed lightweight buildings typically undergo sharp indoor temperature fluctuations in the heating and cooling seasons due to the lack of sufficient thermal mass in their envelopes, resulting in high energy consumption to provide the zone with comfort temperature. The application of phase change materials has been suggested as a promising solution to control the indoor thermal condition in buildings. This work is an attempt to support the application of PCM technology in lightweight relocatable buildings as a passive alternative to save energy under different weather conditions. The numerical results highlighted the potential of using PCM-enhanced gypsum boards in lightweight buildings to increase the energy performance during both heating and cooling seasons in arid and warm temperate main climate areas. [ABSTRACT FROM AUTHOR]

To date, the energy flexibility assessment of multicomponent electrical and thermal systems in residential buildings is hindered by the lack of adequate indicators due to the different interpretations, properties, and requirements that characterise an energy flexible building. This paper addresses this knowledge gap by presenting a fundamental energy flexibility quantification framework applicable to various energy systems commonly found in residential buildings (i.e., heat pumps, renewables, thermal and electrical storage systems). Using this framework, the interactions between these systems are analysed, as well as assessing the net energy cost of providing flexibility arising from demand response actions where onsite electricity production is present. A calibrated white-box model of a residential building developed using EnergyPlus (including inter alia a ground source heat pump, a battery storage system, and an electric vehicle) is utilised. To acquire daily energy flexibility mappings, hourly independent, and consecutive demand response actions are imposed for each energy system, using the proposed indicators. The obtained flexibility maps give insights into both the energy volumes associated with demand response actions and qualitative characteristics of the modulated electricity consumption curves. The flexibility potential of each studied energy system is determined by weather and occupant thermal comfort preferences as well as the use of appliances, lighting, etc. Finally, simulations show that zone and water tank thermostat modulations can be suitably combined to shift rebound occurrences away from peak demand periods. These insights can be used by electricity aggregators to evaluate a portfolio of buildings or optimally harness the flexibility of each energy system to shift peak demand consumption to off-peak periods or periods of excess onsite electricity generation. • Few studies evaluate energy flexibility from an integrated energy systems perspective. • A novel unified framework is proposed for capturing the DR potential of thermal and electrical systems. • A series of novel indicators are introduced to acquire daily energy flexibility mappings. • Flexibility maps are used to quantify energy flexibility concisely and consistently. • Weather, occupant schedules and use of appliances shape the flexibility potential of each system. [ABSTRACT FROM AUTHOR]

• PCM passive system was coupled with natural ventilation. • PCM melting temperature was optimized in different climate zones. • Airflow rates were numerically calculated based on the wind and buoyancy effects. • Two control strategies were implemented to maximize the utilization of ventilation. In recent years, the building sector has been responsible for continuous increase in energy consumption in the world. Space heating and cooling accounts for 34% of this energy consumption in buildings. In this context, using thermal energy storage (TES) can reduce energy consumption for space air conditioning. The use of phase change materials (PCM) as latent heat thermal energy storage (LHTES) system in the building envelope has been of great interest for passive cooling applications due to the high energy storage capacity of this technology. However, in order to utilize the full potential of a PCM, it needs to be fully charged at each cycle. Ventilation during the night is an effective method which can be used in PCM-enhanced office buildings with the aim of charging the PCM every required cycle. In the present study, PCM melting temperature of office building in various climate conditions was optimized using a simulation-based optimization and coupled with free cooling operation. Ventilation control strategies were used to improve the cooling energy performance of the PCM enhanced building integrated into envelopes. It was found that charging PCM with night ventilation, especially when using some specific control strategies of natural ventilation operated by external windows opening results in considerable cooling energy savings. The study was conducted for 15 different cities around the world. It was found that, in hot arid conditions, PCM passive cooling system was ineffective. Although, the energy savings were improved by coupling PCM and natural ventilation in these climate conditions. But the benefits were more or less similar to using natural ventilation only. On the other hand, in temperate condition, the effectiveness of PCM was increased from 3.32% to 25.62% by coupling a PCM passive system with night ventilation. It was further improved to 40% when using PCM with temperature-controlled ventilation. Moreover, it can be said that smart control of ventilation can lead to considerable energy savings. [ABSTRACT FROM AUTHOR]

Phase Change Materials have been acknowledged for their potential to be used as passive strategy for improving energy efficiency and occupants' thermal comfort in buildings. However, their performance still needs to be enhanced to have them effectively used. In this view, this study investigates the potential improvement of PCMs performance for passive cooling application by efficient natural ventilation in residential building stock. Therefore, coupled dynamic simulation and optimization analysis is performed to explore the optimum melting temperature of PCM integrated in the external building envelope to minimize cooling loads in different Italian climate zones. Moreover, various natural ventilation control strategies are implemented to assess their influence on the process of PCM charge-discharge cycle. Results show that PCM inclusion in the building envelope provides significant cooling savings, up to about 300 kWh/year in mild climates. Furthermore, both night and temperature controlled natural ventilation are able to enhance the efficiency of PCMs thermal energy storage charge-discharge cycle. However, the optimum performance is obtained by coupling PCMs with natural ventilation controlled by indoor/outdoor temperature difference in all considered climate contexts. Accordingly, considerable building cooling energy need reduction is achievable through the optimum combination of PCMs and natural ventilation control, especially in milder climates. • PCM passive cooling performance coupled with natural ventilation control is studied. • Summer optimum PCM melting temperature is explored via optimized dynamic simulation. • PCM is included in the building envelope in various Italian climate zones. • PCMs provide significant passive cooling contribution, especially in mild climates. • PCM coupled to T-controlled natural ventilation further improves energy saving. [ABSTRACT FROM AUTHOR]