Search

A novel and accurate liquid chromatography-tandem mass spectrometry method was developed to sequentially determine three persistent herbicides (atrazine (ATZ), acetochlor (ACE), and metolachlor (MET)) and seven characteristic metabolites (desethylatrazine (DEA), deisopropylatrazine (DIA), diaminochlorotriazine (DACT), MET-oxanilic acid (MET-OA), MET-ethanesulfonic acid (MET-ESA), ACE-ESA, and ACE-OA) in fresh fish tissues from six fish species. A modified QuEChERS method was conducted to extract the target compounds from fish tissues. Matrix-matched calibrations of the target analytes were carried out at spiking levels of 1, 10, 100, and 1000 ng g -1 . The method was validated in accordance with Codex guidelines (CAC/GL 71-2009). Recoveries for the target analytes were 67-120% with relative standard deviations below 20%, and the matrix effects ranged from -58.7% to 59.3%. The limits of detection and quantitation were 0.01-1.90 and 0.02-6.35 ng g -1 , respectively. Moreover, the method was successfully applied to analyze the concentrations of the target chemicals in fresh tissue samples of six fish species (n = 67) collected from four markets in Nanning City, Guangxi Province, China. The concentrations in all samples were 1.1-140.5 ng g -1 . Interestingly, this study was the first to measure DEA and DIA in fish liver, and their highest concentrations were 10.7 and 14.2 ng g -1 , respectively. This method provides a basis for studying the pathways of biotransformation, bioaccumulation, detoxification, and exposure patterns of ACE, ATZ, MET, and their metabolites in aquatic environments., (Copyright © 2021. Published by Elsevier Ltd.)

To reveal the adsorption mechanisms of imazamox, imazapic, and imazethapyr on sediment and batch experiments were carried out in this study. The adsorption kinetics of three imidazolinone herbicides on sediment were accurately described by the pseudo-second-order kinetic model(R 2  > 0.9004). The values of adsorption capacity (Q e.cal ) were ranged from 0.0183 to 0.0859 mg kg -1 for three herbicides. Adsorption equilibrium was reached within 24 h for three herbicides on sediment, and well fitted by the Freundlich model(R 2  > 0.9561). The K F of values for adsorption obtained sediment samples were ranged from 0.2501 to 1.322 L 1/n mg 1-1/n kg -1 for three herbicides. These results indicated that intraparticle diffusion and external mass transport were the main rate controlling steps of the adsorption of herbicides on sediment and that the chemical adsorption was dominant during the adsorption processes. The calculated hysteresis coefficient H were 0.9422,0.7877 and 0.744 for imazmox, imazapic and imazethapyr in raw sediment, respectively, indicating that there is a hysteresis in desorption. The influences of solution pH and sediment organic carbon content on the imidazolinone herbicide adsorption behaviors were also examined. Which shown that the adsorption process for herbicides was highly pH-dependent and adsorption efficiency was closely related to the organic matter content of the sediment, suggesting that electrostatic interactions played crucial roles in the adsorption behavior between sediment and imidazolinone herbicides, and the herbicides were mostly absorbed by the amorphous materials of sediment. These research findings are important for assessing the fate and transport of imidazolinone herbicides in water-sediment systems., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Halosulfuron methyl (HSM) is a herbicide widely used to control sedge and broad-leaved weeds during crop production, but its environmental residue may damage non-target crops. Here, proteomics and metabolomics methods were used to explore the phytotoxicity mechanisms of HSM against soybean (Glycine max Merr.). Soybean seedlings were exposed to 0.01, 0.05 and 0.5 mg/L HSM for 8 d. The HSM applications significantly reduced chlorophyll and carotenoid contents in HSM-treated seedlings. Additionally, chlorophyll a fluorescence was seriously affected. The glutathione, hydrogen peroxide and malondialdehyde contents, as well as antioxidant enzyme activities, significantly increased in seedlings exposed to HSM. Furthermore, five enzymes involved in the tricarboxylic acid (TCA) cycle, α-ketoglutarate dehydrogenase, isocitrate dehydrogenase, aconitase, malic dehydrogenase and succinate dehydrogenase, were inhibited to varying degrees in HSM-treated seedlings compared with controls. Proteomics results showed multiple differentially abundant proteins involved in chlorophyll synthesis, photosystem processes and chloroplast ATP synthetase were down-regulated. Metabolomics analyses revealed that metabolites involved in the TCA cycle decreased significantly. Moreover, metabolites and proteins related to reactive oxygen species detoxification accumulated. In conclusion, the phytotoxicity mechanisms of HSM against soybean mainly act by damaging the photosynthetic machinery, inhibiting chlorophyll synthesis, interrupting the TCA cycle and causing oxidative stress. These results provide new insights into the toxicity mechanisms of sulfonylurea herbicides against non-target crops., (Copyright © 2020 Elsevier Masson SAS. All rights reserved.)

This work investigated drinking water contamination by 11 commonly used herbicides in sugarcane production areas in Guangxi, China. The work developed an analytical method for determination of these herbicides in environmental waters. This work studied herbicide residues in drinking water in Guangxi, China. The maximum residues and percent of detects were: (0.091 µg/L, 29.2%, atrazine), (0.018 µg/L, 8.3%, ametryne), (0.188 µg/L, 8.3%, aetolaehlor), (0.139 µg/L, 4%, simazine), (0.585 µg/L, 62.5%, atrazine), (0.311 µg/L, 33.3%, acetochlor), (0.341 µg/L, 58.3%, ametryne), (1.312 µg/L, 29.2%, metolachlor), (0.088 µg/L, 4.2%, alachlor), (0.127 µg/L, 14.3%, atrazine), and (0.453 µg/L, 7.1%, metolachlor), respectively. The results demonstrated that agricultural herbicides were detected in all water samples, including tap, surface and groundwater samples. Since the residues are generally below the safe limits established by the government authorities, the monitored 11 herbicides do not significantly affect the quality of the human environment. This work will provide scientific understanding of pesticide residues in drinking water standards in terms of its consistency with precautionary human health and environmental safety.

An analytical method based on stir bar sorptive extraction (SBSE) coupled with pulse glow discharge-ion mobility spectrometry (PGD-IMS) was developed for analysis of three triazine pesticide residues in water and soil samples. An injection port with sealing device and stir bars hold device were designed and constructed to directly position the SBSE fiber including the extracted samples into the heating device, making desorption and detection of analytes proceeded simultaneously. The extraction conditions such as SBSE solid phase material, extraction time, extraction temperature, pH value and salt concentration were optimized. Mixture of MWCNTs-COOH and PDMS were shown to be effective in enriching the triazines. The LODs and LOQs of three triazines were found to be 0.006-0.015μgkg(-1) and 0.02-0.05μgkg(-1), and the linear range was 0.05-10μgL(-1) with determination coefficients from 0.9987 to 0.9993. The SBSE-PGD-IMS method was environmentally friendly without organic solvent consumption in the entire experimental procedures, and it was demonstrated to be a commendable rapid analysis technique for analysis of triazine pesticide residues in environmental samples on site. The proposed method was applied for the analysis of real ground water, surface water and soil samples., (Copyright © 2016 Elsevier B.V. All rights reserved.)

There is increasing concern about the enantioselective effects of chiral herbicides. To study the enantioselective toxicity of the chiral herbicide imazamox on maize, maize seedlings (Zhengda 619, Zea mays L.) were exposed to imazamox racemate and enantiomers in hydroponic experiments. The results showed that imazamox enantiomers selectively affected maize. The effective concentration of Rac-, S- and R-imazamox that caused 50 % inhibition after 5 days treatments (EC50,5d) were 0.4212, 1.2142 and 0.2460 mg L(-1), respectively, for maize root length; 0.0002, 0.1005, 0.0032 mg L(-1), respectively, for maize root fresh weight; 0.7114, 1.4056 and 0.4530 mg L(-1), respectively, for maize shoot height; 0.6220, 1.5418, 0.2286 mg L(-1), respectively, for maize shoot fresh weight; and 0.1100, 0.3306, 0.0307 mg L(-1), respectively, for the total chlorophyll content of leaves. The root morphological parameters and root activity reflected the toxicity effects in the order R-imazamox > Rac-imazamox > S-imazamox. Maize roots were more sensitive to imazamox than maize shoots. The chiral herbicide imazamox poses enantioselective phytotoxicity on maize seedlings: the order of toxicity is R-imazamox > Rac-imazamox > S-imazamox.

The dissipation and residues of bispyribac-sodium in rice cropping system were studied. Bispyribac-sodium residues were extracted by a simple analytical method based on QuEChERs and detected by LC-MS/MS. The limit of detection for bispyribac-sodium of this method was 0.375 × 10(-3) ng. The limit of quantification (LOQ) was 5.0 μg/kg for rice plant samples, 2.0 μg/kg for rice hull, 0.2 μg/kg for water, and 0.1 μg/kg for soil and husked rice samples. The average recoveries of bispyribac-sodium ranged from 74.7 to 108%, with relative standard deviations less than 13%. The half-lives of bispyribac-sodium in rice plant, water, and soil were in the range of 1.4-5.6 days. More than 90% of bispyribac-sodium residue dissipated within 5 days. The final residues of bispyribac-sodium in rice were all below LOQ at harvest time.