Search

Abstract: Selectivity control in heterogeneously catalyzed hydrogenation of conjugated hydrocarbons (ene-yne and diene compounds) is a challenging task. Available studies on the topic mainly encircle 1,3-butadiene as the substrate and palladium as the catalyst, while more elaborated playground molecules and other metals remain largely unexplored. This study investigates the gas-phase hydrogenation of valylene (2-methyl-1-butene-3-yne) and isoprene (2-methyl-1,3-butadiene) over Pd, Pb-poisoned Pd, CO-modified Pd, Cu, Ni, and bimetallic Custs. Chemoselectivity, regioselectivity, full hydrogenation, and Crmation/scission footprints of the catalytic systems at different inlet hydrogen-to-hydrocarbon ratios and conversion degrees have been rationalized. Complementary studies of 3-methylbutyne and 1-penten-4-yne hydrogenation were carried out in order to analyze (i) the impact of isomerization on the observed mono-olefin distribution in valylene/isoprene hydrogenation and (ii) the conjugation issue in partial ene-yne hydrogenation. Our results lead to an improved understanding of hydrogenation of polyunsaturated hydrocarbons and open doors to design more selective heterogeneous catalysts and related processes for this practically important class of reactions. [Copyright &y& Elsevier]

The gas-phase hydrogenation of propyne to propene was investigated over a series of heterogeneous catalysts based on Pd (in the absence and the presence of CO), Ni, Au, Cu, and Cu–Ni. Catalytic tests in a continuous flow micro-reactor at ambient pressure and density functional theory (DFT) calculations were combined to understand complex structure–selectivity–activity relationships and their dependence on key experimental variables such as H2/alkyne and CO/H2ratios. The wide scope of our work enables the identification of similarities and differences between these systems and paves the way to design more selective catalysts. [ABSTRACT FROM AUTHOR]

Abstract: Alkyne hydrogenation, a widely used process in industry to purify olefin streams, comprises a prototype reaction to understand selectivity in heterogeneously catalyzed reactions. The selectivity of the reaction on palladium catalysts to the alkene, alkane, or oligomers strongly depends on the state of the (sub)surface; i.e., the occurrence of complex carbide/hydride phases. In practice, hydrogenation reactors in C2 and C3 cuts of steam crackers require continuous CO feeding in order to enhance the alkene selectivity of palladium-supported catalysts. In the present work, we have studied the impact of carbon monoxide on the formation of carbide and hydride phases as a standpoint to derive structure–performance relationships under realistic process conditions. For this purpose, catalytic tests on a standard 1wt.% Pd/Al2O3 and Density Functional Theory on Pd(111) were combined. The influence of: (i) the alkyne (ethyne and propyne), (ii) the hydrogen:alkyne ratio (1–10), (iii) the carbon monoxide:hydrogen ratio (0–0.2), and (iv) the catalyst pretreatment on the product distribution was assessed in a continuous flow fixed-bed reactor at ambient pressure. In absence of CO, subtle changes in the hydrogen:alkyne ratio generate undesired products. Carbon monoxide enables the external control of the catalyst state by suppressing the formation of subsurface hydride and carbide phases, thereby stabilizing a high alkene yield in a broad range of feed hydrogen:alkyne ratios. This scenario contrasts with the more fragile regime of the hydride–carbide phases under CO-free conditions. DFT calculations obtained a single Brønsted–Evans–Polanyi relationship independently of the state of the catalyst (carbide, hydride, CO-covered) and the alkyne–alkene–alkane set (C2, C3). [Copyright &y& Elsevier]

Controlling the structure sensitivity of catalyzed reactions over metals is central to developing atom‐efficient chemical processes. Approaching the minimum ensemble size, the properties enter a non‐scalable regime in which each atom counts. Almost all trends in this ultra‐small frontier derive from surface science approaches using model systems, because of both synthetic and analytical challenges. Exploiting the unique coordination chemistry of carbon nitride, we discriminate through experiments and simulations the interplay between the geometry, electronic structure, and reactivity of palladium atoms, dimers, and trimers. Catalytic tests evidence application‐dependent requirements of the active ensemble. In the semi‐hydrogenation of alkynes, the nuclearity primarily impacts activity, whereas the selectivity and stability are affected in Suzuki coupling. This powerful approach will provide practical insights into the design of heterogeneous catalysts comprising well‐defined numbers of atoms. [ABSTRACT FROM AUTHOR]

Selective hydrogenations lay at the heart of many industrial processes. The archetypal catalysts for this class of reactions are generally prepared by 'metal poisoning' strategies: the active metal is protected and selectively deactivated with various compounds. This approach has been applied for decades, with limited understanding. Low product selectivity and presence of toxic elements in the catalyst pose severe constraints in the utilization of these materials in the future. Thus, to develop more sustainable catalysts, this field has recently gained momentum. This Review analyzes the concepts and frontiers that have been developed in the last decade: from nanostructuring less conventional metals in order to improve their ability to activate H2, to the use of oxides as active phases, from alloying, to the ensemble control in hybrid materials, and site isolation approaches in single-site heterogeneous catalysts. Particular attention is given to the hydrogenation of alkynes and nitroarenes, two reactions at the core of the chemical industry, importantly applied in the manufacture of polymers, pharmaceuticals, nutraceuticals, and agrochemicals. The strategies here identified can be transposed to other relevant hydrogenations and can guide in the design of more advanced materials. [ABSTRACT FROM AUTHOR]