Search

This letter proposes a high output voltage dc–dc converter topology with series stacked converter modules. To implement the proposed modular dc–dc converter structure, output voltage balancing of the modules and simplification of the control circuitry were considered the major design objectives. To achieve voltage balancing between the modules, we proposed a split-secondary transformer winding structure and distributed connections to the rectifier circuit blocks. Each transformer includes two secondary windings, with each wire pair connected to a different rectifier circuit. Consequently, one rectifier receives ac power simultaneously by sharing the secondary windings fed from two different transformers. The proposed method was verified using a modular LCC resonant converter, which is widely employed in high-voltage applications. As a result, the control circuit was simplified by using a single controller to regulate the total output voltage and by applying a compact sensing circuit referenced to the output voltage of the module placed at the lowest grounding point. [ABSTRACT FROM AUTHOR]

In this paper, a 25-kW bipolar pulsed-power supply for strategic mineral exploration has been described. A 500-V, 12.5-A unit module consisting of a highly efficient LCC resonant converter and a full-bridge-based bipolar pulse-switching unit is designed. The LCC resonant converter has a trapezoidal-shaped resonant current for reduced conduction loss. For achieving high power density, the leakage inductance of the transformer is used as resonant inductance without an external inductor. Moreover, the designed gate drive circuit based on the repetitive short pulse is proposed to operate the frequency range from dc to 8 kHz and reduce the size of the gate transformer. Four modules are connected in series and parallel in order to operate the power supply in either loop mode or grounded dipole mode. Depending on the load condition, the pulse power source capable of delivering the required high voltage and low current (2 kV, 12.5 A) or low voltage and high current (500 V, 50 A) is operated either in grounded dipole mode or loop mode, respectively. In order to satisfy the output voltage balancing of the four modules, the third wire is wound to compensate for the transformer of the LCC resonant converter. Finally, the design of the bipolar pulsed-power supply has been verified based on the experimental results of the field test. [ABSTRACT FROM AUTHOR]