Search

In view of the difficulty to effectively extract compound faults of rolling bearing from aero-engine and precisely identify their types, the paper has proposed a method integrating signal separation algorithm and information fusion. Firstly, the method decomposes the vibration acceleration signals collected by sensors from different positions at the same moment based on intrinsic time scale decomposition algorithm. Secondly, cross correlation analysis is given to the proper rotation component (PRC) of the same layer, which are obtained after decomposition and correspond to the sensors from different positions and cross-correlation function is introduced to embody information fusion. Thirdly, signals are reconstructed according to cross-correlation function of each PRC. Finally, based on the frequency spectrum of reconstructed signal, extract the characteristics of rolling bearing and identify the type of faults under different sensor combinations and multiple compound fault types. The result shows, the proposed method can effectively extract the characteristics of compound faults of bearing and precisely identify the type of faults under different sensor combinations and multiple compound fault types of rolling bearing. [ABSTRACT FROM AUTHOR]

• Sensibility of variance to variation of signal intensity is used to construct Hankel matrix to highlight fault feature. • Optimal scale of the variance series was determined by sample entropy to create a multi-scale Hankel matrix. • Proposed multiscale singular value method can effectively reduce noise and highlight fault feature information. • Proposed method is insensitive to installation positions of sensors and the fault type of rolling bearings. To solve the vulnerability of singular value denoising to the effective number of singular value orders and influence of Hankel matrix structure, the paper has proposed a multiscale singular value denoising algorithm (M-SVD). Meanwhile, in concerning that when a fault of bearing occurs, the fault feature information contained in vibration signal tends to be weak and complex, the M-SVD method is blended with variational mode decomposition (VMD) algorithm in identification. Firstly, when bearing faults occur, raw vibration acceleration signals are decomposed using the superiority of VMD algorithm for non-stationary signal; in addition, considering that with the larger difference between singular values of signal, feature information will be more obvious, the method takes advantage of sensibility of variance to signal intensity and proposes to constitute Hankel matrix based on variance feature of signal. During the construction of Hankel matrix, the method to determine effective length of variance sequence (optimal scale) has been brought forward by sample entropy which is able to precisely measure the regularity of signal and detect the weak change of signal. Furthermore, component signals are denoised in line with reconstructed Hankel matrix and the spectrum of signals denoised are selected to describe fault characteristic information and judge the failure types. For the sake of verification of the accuracy and effectiveness of proposed method, the paper has analyzed and verified the data of rolling bearing in 3 different failure types and 2 different installation positions of accelerometers. The comparative analysis with classical singular value difference spectrum (SVDS) and singular value median decomposition (SVMD) denoising has further proved that presented VMD combined M-SVD method can effectively restrain noise while retaining fault characteristic information of signal. Therefore, the identification for rolling bearing fault types can be implemented, accurately. [ABSTRACT FROM AUTHOR]