Search

Background: The present study aimed to identify the risk factors of periprosthetic femoral fracture (PFF) after cementless total hip arthroplasty and rank them based on importance., Methods: The age, sex, body mass index (BMI), osteoporosis, canal flare index (CFI), canal bone ratio (CBR), canal calcar ratio (CCR), stem design, and stem canal fill ratio (P1, P2, P3, and P4) of the proximal femoral medullary cavity of 111 total hip arthroplasty patients who had PFF and 388 who did not have PFF were analyzed. Independent-samples student t-tests were used for continuous variables, and Chi-square tests were used for categorical variables. The importance rankings of influencing factors were assessed using a random forest algorithm. Dimensionally reduced variables were then incorporated into a binary logistic regression model to determine the PFF-related risk factors., Results: The mean age, BMI, CBR, CCR, and incidence of osteoporosis were higher in cases of PFF (all P < .001), while the mean CFI, P1, P2, P3, and P4 were lower in cases of PFF (P < .001, P = .033, P = .008, P < .001, and P < .001, respectively). Additionally, the stem design was also statistically associated with PFF (P < .001). Multivariate logistic regression revealed that advanced age, higher BMI, osteoporosis, stem design, lower CFI, higher CBR, higher CCR, lower P1, lower P2, lower P3, and lower P4 were the risk factors of PFF (P < .001, P < .001, P < .001, P < .001, P < .001, P = .010, P < .001, P = .002, P < .001, P < .001, and P = .007, respectively). The ranked importance of the risk factors for PFF was P3, CFI, osteoporosis, CBR, age, P4, P1, stem design, CCR, BMI, and P2., Conclusions: Lower P3, lower CFI, osteoporosis, higher CBR, advanced age, lower P4, lower P1, stem design, higher CCR, higher BMI, and lower P2 increased the risk of PFF., (Copyright © 2024 The Authors. Published by Elsevier Inc. All rights reserved.)

Introduction: Cementless fixation has become increasingly popular in hip arthroplasty due to its shorter operation time, easier technique, biologic fixation, and avoidance of bone cement implantation syndrome compared to cemented fixation. However, intraoperative periprosthetic femoral fracture (IOPFx) is a disconcerting complication during cementless hip arthroplasty. Our purpose was to identify the features of cementless stem that increase the risk of IOPFx during primary hip arthroplasty., Materials and Methods: We retrospectively reviewed all 4806 hip arthroplasties that was performed in a single institution from May 2003 to December 2020. Age at the index arthroplasty, sex, body mass index, physical status, ambulatory function, side of the operation, operational history, cause of the index arthroplasty, type of arthroplasty, surgical approach, surgeon, implant information, and events during the operation were investigated. The shoulder geometry and length of stem were also reviewed. The event of interest was narrowed down to IOPFx among various records of intraoperative events., Results: We found IOPFx of 2.6% among all the hips operated with cementless stem. In the multivariable analysis, female (OR = 1.52), childhood hip disease (OR = 2.30), stove-pipe femur (OR = 2.43), combined approach (OR = 2.60), and standard length of stem (OR = 1.59) were found to be significant risk factors of IOPFx., Conclusions: In conclusion, a stem with a standard length is significantly associated with risk of IOPFx compared to a shortened stem. These findings highlight the importance of careful consideration in terms of the risk of IOPFx when standard length cementless stem is chosen., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Background: Periprosthetic femur fracture is a known complication after THA. The associated risk of cementless femoral component design for periprosthetic femur fracture in a registry population of patients older than 65 years has yet to be clearly identified., Questions/purposes: (1) Is femoral stem geometry associated with the risk of periprosthetic femur fracture after cementless THA? (2) Is the presence or absence of a collar on cementless femoral implant designs associated with the risk of periprosthetic femur fracture after THA?, Methods: We analyzed American Joint Replacement Registry data from 2012 to March 2020. Unique to this registry is the high use of cementless femoral stems in patients 65 years and older. We identified 266,040 primary cementless THAs during the study period in patients with a diagnosis of osteoarthritis and surgeries linked to supplemental Centers for Medicare and Medicaid data where available. Patient demographics, procedure dates, and reoperation for periprosthetic femur fracture with revision or open reduction and internal fixation were recorded. The main analysis was performed comparing the Kheir and Chen classification: 42% (112,231 of 266,040) were single-wedge, 22% (57,758 of 266,040) were double-wedge, and 24% (62,983 of 266,040) were gradual taper/metadiaphyseal-filling cementless femoral components, which yielded a total of 232,972 primary cementless THAs. An additional analysis compared cementless stems with collars (20% [47,376 of 232,972]) with those with collarless designs (80% [185,596 of 232,972]). A Cox proportional hazard regression analysis with the competing risk of death was used to evaluate the association of design and fracture risk while adjusting for potential confounders., Results: After controlling for the potentially confounding variables of age, sex, geographic region, osteoporosis or osteopenia diagnosis, hospital volume, and the competing risk of death, we found that compared with gradual taper/metadiaphyseal-filling stems, single-wedge designs were associated with a greater risk of periprosthetic femur fracture (HR 2.9 [95% confidence interval (CI) 2.2 to 3.9]; p < 0. 001). Compared with gradual taper/metadiaphyseal-filling stems, double-wedge designs showed an increased risk of periprosthetic femur fracture (HR 3.0 [95% CI 2.2 to 4.0]; p < 0. 001). Collarless stems showed an increased risk of periprosthetic fracture compared with collared stems (HR 7.8 [95% CI 4.1 to 15]; p < 0. 001)., Conclusion: If cementless femoral fixation is used for THA in patients 65 years or older, surgeons should consider using gradual taper/metadiaphyseal-filling and collared stem designs because they are associated with a lower risk of periprosthetic femur fracture. Future investigations should compare gradual taper/metadiaphyseal-filling and collared cementless designs with cemented fixation in this population., Level of Evidence: Level III, therapeutic study., Competing Interests: All ICMJE Conflict of Interest Forms for authors and Clinical Orthopaedics and Related Research® editors and board members are on file with the publication and can be viewed on request., (Copyright © 2024 by the Association of Bone and Joint Surgeons.)

Background: The radiographic assessment of bone morphology impacts implant selection and fixation type in total hip arthroplasty (THA) and is important to minimize the risk of periprosthetic femur fracture (PFF). We utilized a deep-learning algorithm to automate femoral radiographic parameters and determined which automated parameters were associated with early PFF., Methods: Radiographs from a publicly available database and from patients undergoing primary cementless THA at a high-volume institution (2016 to 2020) were obtained. A U-Net algorithm was trained to segment femoral landmarks for bone morphology parameter automation. Automated parameters were compared against that of a fellowship-trained surgeon and compared in an independent cohort of 100 patients who underwent THA (50 with early PFF and 50 controls matched by femoral component, age, sex, body mass index, and surgical approach)., Results: On the independent cohort, the algorithm generated 1,710 unique measurements for 95 images (5% lesser trochanter identification failure) in 22 minutes. Medullary canal width, femoral cortex width, canal flare index, morphological cortical index, canal bone ratio, and canal calcar ratio had good-to-excellent correlation with surgeon measurements (Pearson's correlation coefficient: 0.76 to 0.96). Canal calcar ratios (0.43 ± 0.08 versus 0.40 ± 0.07) and canal bone ratios (0.39 ± 0.06 versus 0.36 ± 0.06) were higher (P < .05) in the PFF cohort when comparing the automated parameters., Conclusions: Deep-learning automated parameters demonstrated differences in patients who had and did not have early PFF after cementless primary THA. This algorithm has the potential to complement and improve patient-specific PFF risk-prediction tools., (Copyright © 2023 Elsevier Inc. All rights reserved.)

Background: Periprosthetic femur fracture (PFF) following total hip arthroplasty (THA) is a leading cause of early reoperation. The objective of this study was to compare rates of periprosthetic joint infection (PJI) and reoperation following PFFs occurring early postoperatively to those that occurred late., Methods: We retrospectively identified 173 consecutive surgically managed PFFs following primary THA. Cases were categorized as "early" if they occurred within 90 days of THA (n = 117) or "late" if they occurred following the initial 90 days (n = 56). Mean age at time of PFF was 68 years (range, 26 to 96) and 60% were women. Mean body mass index was 29 (range, 16 to 52). Mean follow-up was 2 years (range, 0 to 13). Kaplan-Meier survival analysis estimated cumulative incidences of PJI and reoperation., Results: Early PFFs had higher 2-year cumulative incidence of PJI (11% versus 0%, P < .001) and reoperation (24% versus 13%, P = .110). Following early PFF, 27 patients required reoperation (ie, 13 for PJI, 5 for instability, 2 for re-fracture, 2 for painful hardware, 2 for non-union, 1 for adverse local tissue reaction, 1 for aseptic loosening, and 1 for leg-length discrepancy). Following late PFF, 5 patients required reoperation (ie, 3 for instability, 1 for re-fracture, and 1 for non-union)., Conclusions: There are greater incidences of PJIs and overall reoperations following early PFFs compared to late PFFs after THA. In addition to focusing efforts on prevention of early PFFs, surgeons should consider antiseptic interventions to mitigate the increased risk of PJI after treatment of early PFF., (Copyright © 2023 Elsevier Inc. All rights reserved.)

Introduction: Modular fluted, tapered stems provide a reliable treatment for Vancouver B2/B3 fractures. Historically, these patients had weightbearing restrictions postoperatively. Although full immediate postoperative weightbearing may provide benefits in this patient population, stem subsidence is a concern., Questions/purposes: The objective of this study was to investigate the effect of post-operative weight-bearing status on stem subsidence in patients treated with modular tapered stems for Vancouver B2 and B3 periprosthetic fractures. We sought to answer two questions: (1) Does full immediate postoperative weightbearing after revision total hip arthroplasty for periprosthetic femur fracture lead to increased stem subsidence compared to protected weightbearing? (2) Is there a mortality difference between these two groups of patients with different weightbearing restrictions?, Methods: From 2009 to 2015 all patients who underwent revision for Vancouver B2/B3 fractures were made non-weightbearing (NWB) for six weeks postoperatively. After 2015, immediate weightbearing as tolerated (WBAT) was allowed postoperatively. We compared stem subsidence between immediate postoperative and final radiographs. Additionally, we performed a Kaplan-Meijer analysis with one-year mortality as an endpoint., Results: The final cohort included forty-seven patients with an average follow-up of 254 days. The average stem subsidence was 1.0 mm (95 % CI, 0.5-1.5 mm) in the NWB cohort and 0.3 mm (95 % CI, 0-0.7 mm) in the WBAT cohort (P = 0.10). In our survivorship analysis, we noted no deaths in the WBAT cohort compared to 17 % mortality in the NWB cohort at the one-year timepoint., Conclusion: Allowing patients to weight bear immediately after revision does not increase stem subsidence. Further studies are needed to determine whether early weightbearing provides a mortality benefit., Competing Interests: Declaration of competing interest One or more of the authors (TTM and AJJ) have received funding from Depuy-Synthes for research support not related to the submitted article. All other authors (RG, BAO, PJM, TGC) certify that there are no funding or commercial associations (consultancies, stock ownership, equity interest, patent/licensing arrangements, etc.) that might pose a conflict of interest in connection with the submitted article related to the author or any immediate family members., (Copyright © 2024. Published by Elsevier Ltd.)

Aims: Periprosthetic femoral fracture (PPF) is a major complication following total hip arthroplasty (THA). Uncemented femoral components are widely preferred in primary THA, but are associated with higher PPF risk than cemented components. Collared components have reduced PPF rates following uncemented primary THA compared to collarless components, while maintaining similar prosthetic designs. The purpose of this study was to analyze PPF rate between collarless and collared component designs in a consecutive cohort of posterior approach THAs performed by two high-volume surgeons., Methods: This retrospective series included 1,888 uncemented primary THAs using the posterior approach performed by two surgeons (PKS, JMV) from January 2016 to December 2022. Both surgeons switched from collarless to collared components in mid-2020, which was the only change in surgical practice. Data related to component design, PPF rate, and requirement for revision surgery were collected. A total of 1,123 patients (59.5%) received a collarless femoral component and 765 (40.5%) received a collared component. PPFs were identified using medical records and radiological imaging. Fracture rates between collared and collarless components were analyzed. Power analysis confirmed 80% power of the sample to detect a significant difference in PPF rates, and a Fisher's exact test was performed to determine an association between collared and collarless component use on PPF rates., Results: Overall, 17 PPFs occurred (0.9%). There were 16 fractures out of 1,123 collarless femoral components (1.42%) and one fracture out of 765 collared components (0.13%; p = 0.002). The majority of fractures (n = 14; 82.4%) occurred within 90 days of primary THA. There were ten reoperations for PPF with collarless components (0.89%) and one reoperation with a collared component (0.13%; p = 0.034)., Conclusion: Collared femoral components were associated with significant decreases in PPF rate and reoperation rate for PPF compared to collarless components in uncemented primary THA. Future studies should investigate whether new-generation collared components reduce PPF rates with longer-term follow-up., Competing Interests: None declared., (© 2024 The British Editorial Society of Bone & Joint Surgery.)

Aims: The aim of this retrospective study was to assess the incidence of early periprosthetic femoral fracture (PFF) associated with Charnley-Kerboull (CK) femoral components cemented according to the 'French paradox' principles through the Hueter anterior approach (HAA) in patients older than 70 years., Methods: From a prospectively collected database, all short CK femoral components implanted consecutively from January 2018 to May 2022 through the HAA in patients older than 70 years were included. Exclusion criteria were age below 70 years, use of cementless femoral component, and approaches other than the HAA. A total of 416 short CK prostheses used by 25 surgeons with various levels of experience were included. All patients had a minimum of one-year follow-up, with a mean of 2.6 years (SD 1.1). The mean age was 77.4 years (70 to 95) and the mean BMI was 25.3 kg/m 2 (18.4 to 43). Femoral anatomy was classified according to Dorr. The measured parameters included canal flare index, morphological cortical index, canal-calcar ratio, ilium-ischial ratio, and anterior superior iliac spine to greater trochanter (GT) distance., Results: Among the 416 THAs, two PFFs (0.48% (95% confidence interval 0.13 to 1.74)) were observed, including one Vancouver type B2 fracture 24 days postoperatively and one intraoperative Vancouver type B1 fracture. Valgus malalignment and higher canal bone ratio were found to be associated with PFF., Conclusion: This study demonstrated that short CK femoral components cemented according to the French paradox were associated with a low rate of early PFF (0.48%) in patients aged over 70 years. Longer follow-up is warranted to further evaluate the rate of fracture that may occur during the bone remodelling process and with time., Competing Interests: P. Anract reports royalties from Serf, consulting fees from Medacta and Amplitude, presentation payments from Sanofi, and manuscript writing payments from Move up, all of which are unrelated to this study. M. Hamadouche is Secretary General for SOFCOT, and reports royalties and consulting fees from Medacta, which are unrelated to this study., (© 2024 The British Editorial Society of Bone & Joint Surgery.)

Introduction: This study aims to identify radiographic and clinical risk factors of perioperative periprosthetic femur fracture associated with the direct anterior approach (DAA) using a metaphyseal fit and fill stem. We hypothesize stem malalignment with this femoral implant places increased stress on the medial calcar region, which leads to an increased risk of periprosthetic fracture., Methods: We compared patients with periprosthetic femur fractures following DAA total hip arthroplasty (THA) utilizing the Echo Bi-Metric Microplasty Stem (Zimmer Biomet, Warsaw, IN) to a cohort of patients who did not sustain a periprosthetic fracture from five orthopedic surgeons over four years. Postoperative radiographs were evaluated for stem alignment, neck cut level, Dorr classification, and the presence of radiographic pannus. Univariate and logistic regression analyses were performed. Demographic and categorical variables were also analyzed., Results: Fourteen hips sustained femur fractures, including nine Vancouver B2 and five AG fractures. Valgus stem malalignment, proud stems, extended offset, and patients with enlarged radiographic pannus reached statistical significance for increased fracture risk. Low femoral neck cut showed a trend toward statistical significance., Conclusion: Patients undergoing DAA THA using a metaphyseal fit and fill stem may be at increased risk of perioperative periprosthetic fracture when the femoral stem sits proudly in valgus malalignment with extended offset and when an enlarged pannus is seen radiographically. This study identifies a specific pattern in the Vancouver B2 fracture cohort with regard to injury mechanism, time of injury, and fracture pattern, which may be attributed to coronal malalignment of the implant., (© 2023. The Author(s).)

Polished taper-slip (PTS) cemented stems have an excellent clinical track record and are the most common stem type used in primary total hip arthroplasty (THA) in the UK. Due to low rates of aseptic loosening, they have largely replaced more traditional composite beam (CB) cemented stems. However, there is now emerging evidence from multiple joint registries that PTS stems are associated with higher rates of postoperative periprosthetic femoral fracture (PFF) compared to their CB stem counterparts. The risk of both intraoperative and postoperative PFF remains greater with uncemented stems compared to either of these cemented stem subtypes. PFF continues to be a devastating complication following primary THA and is associated with high complication and mortality rates. Recent efforts have focused on identifying implant-related risk factors for PFF in order to guide preventative strategies, and therefore the purpose of this article is to present the current evidence on the effect of cemented femoral stem design on the risk of PFF., Competing Interests: This paper presents independent research funded/supported by the National Institute for Health and Care Research Leeds Biomedical Research Centre. S. Jain reports consulting fees from Stryker, unrelated to this study. J. Lamb reports consulting fees from DePuy Synthes and payment or honoraria for lectures, presentations, speakers bureaus, manuscript writing or educational events from DePuy Synthes and Link, all of which are unrelated to this study. H. Pandit reports grants or contracts from the National Institute for Health and Care Research (NIHR) HTA Periscope, NIHR HTA Kardis, and KTP, consulting fees from Medacta International, Zimmer Biomet, MatOrtho, Microport, Allay Therapeutics, Paradigm Pharmaceuticals, Invibio, and Teleflex, patents planned, issued or pending from iSMART, and receipt of equipment, materials, drugs, medical writing, gifts or other services from Pacira Pharmaceuticals, Medacta International, and Zimmer Biomet, all of which are unrelated to this study., (© 2024 The British Editorial Society of Bone & Joint Surgery.)

Background: The authors applied Anatomique Benoist Girard II (ABG II) stems for total hip arthroplasty in some Dorr type C femurs as early attempts. Here, the authors compared the long-term follow-up results between ABG II stems and the 'well-performing' Corail stems and their monochromatic images., Methods: Among 3214 primary total hip arthroplasty records, 43 short ABG II stems and 67 standard-length Corail stems implanted in Dorr type C femurs were eligible and enrolled in this retrospective cohort study, with a mean follow-up of 10.3 years. Revision rates, Harris hip scores, and radiologic signs were compared. Spectral CT scans from a representative sample were obtained, and monochromatic images were reconstructed. A quantitative method was developed to measure the volume of the gap around stems. Patient-specific finite element analysis was conducted to investigate the strains., Results: The revision rate of ABG II stems was significantly higher than that of Corail stems (21 vs. 3%, P <0.05). In the monochromatic images, fewer spot-weld signs (2.2 vs. 3.4, P <0.05) and wider gaps around stems (1.64 cm 3 vs. 0.13 cm 3 , P <0.05) were observed on average in the ABG II group. The mean maximum principal strains of the proximal femurs in the ABG II group were close to the yield strains and significantly larger than those in the Corail group (0.0052 vs. 0.0011, P <0.05)., Conclusions: There was a high risk of postoperative periprosthetic femoral fracture for ABG II stems in Dorr type C femurs. Monochromatic images provided some insight into the failure mechanism., Level of Evidence: III., (Copyright © 2023 The Author(s). Published by Wolters Kluwer Health, Inc.)

Background: Periprosthetic femur fracture (PFF) is a complication of total hip arthroplasty (THA). These occur intraoperatively or postoperatively, and documented risk factors of PFFs include women, age greater than 65 years, cementless stems, and inflammatory arthropathies. The aim of this retrospective cohort study was to assess the relationship of years of surgical experience and surgeon annual THA volume on intraoperative and postoperative PFFs., Methods: Data were collected from a database query, and PFFs were identified as either intraoperative or postoperative. Intraoperative and postoperative PFFs were both compared to a control group of non-PFF patients. Years of surgical experience at the time of surgery and annual THA volume for the primary surgeon were calculated for all cases. Logistic regression analyses were used to calculate odds ratios for each of the surgeon variables when adjusted for patient demographics., Results: Thirty-seven intraoperative and 108 postoperative PFFs were identified and compared to 7,629 controls. From regression analyses, high-volume surgeons (≥50 THA/year) had lower odds of intraoperative PFF (adjusted odds ratio (aOR) = 0.40, P = .020) but not postoperative PFF (aOR = 1.02, P = .921). Surgeon experience (≥15 years since board certification at the time of surgery), was not significantly related to either PFF outcomes. For patient factors, age ≥65 years (aOR = 2.30, P < .001) and women (aOR = 2.69, P < .001) were both significant predictors of postoperative PFFs only., Conclusion: Surgeons who performed 50 or more THAs per year had significantly fewer intraoperative PFFs than surgeons who did less than 50 THAs per year. Surgeon experience was not significantly related to PFFs., (Published by Elsevier Inc.)

Background: We compared the incidence of postoperative periprosthetic femoral fractures (POPFF) following hip arthroplasty with either a cemented polished taper slip (PTS) stem or a cemented composite beam (CB) stem in comparative studies., Methods: A systematic review of comparative studies, written in English and published in peer-reviewed journals since the year 2000, was conducted. Study quality was assessed using the Newcastle-Ottawa scale.The overall study qualities were good. There were 913,021 patients from 18 cohorts included in the meta-analysis. There were 294,540 patients who received a CB stem and 618,481 received a PTS stem. Cohorts were classified as high- or low-risk for POPFF based on patient risk factors. A metanalysis was performed using a random effects model, and the relative incidence with 95% confidence intervals (CIs) was reported., Results: The patients at low risk of POPFF had an incidence rate ratio of 3.14 (CI: 2.48, 3.98) for the PTS group versus the CB group. Whereas, the patients at high risk of POPFF had an incidence rate ratio of 9.87 (CI: 3.63, 26.80) for the PTS group versus the CB group., Conclusions: The risk of POPFF is lower when hip arthroplasty was performed using a CB stem versus a PTS stem. This protective effect was greatest in patients who had a higher risk of POPFF. Surgeons should consider the effect of cemented stem choice on the risk of subsequent periprosthetic femur fracture, particularly in frail or elderly patients who are at a higher risk of postoperative periprosthetic femoral fracture., (Copyright © 2023 Elsevier Inc. All rights reserved.)

Introduction: The incidence of postoperative periprosthetic fracture has been reported to be higher in polished tapered femoral stems with the CPT stem possibly of greatest concern. We report on the patient and surgical factors in a consecutive cohort of 2892 CPT stems implanted as part of a total hip construct, either electively or for the treatment of a fractured neck of femur (NOF) over a 15-year period., Methods: The Bluespier departmental database was used to identify any patients who been treated for a Vancouver B periprosthetic fracture around a CPT stem from 2008 to 2021. Patient demographics, mechanism of injury and fracture type were recorded. X-rays were reviewed to identify technical issues that may have contributed to the fracture., Results: A total of 70 fractures were treated. For elective cases the fracture rate was 1.52% while for stems implanted for treatment of a neck of femur fracture (NOF) it was 2.86%. There was a male preponderance and almost all fractures were low energy. The majority (52.9%) were B1 fractures. Only 8 (11.4%) involved a truly loose construct (B2L). The presence of an undersized and varus stem increased the risk of fracture particularly in the NOF population., Discussion: The results in this series are consistent with the registry data regarding the rate of failure of the CPT stem related to periprosthetic fracture. The patient population is typical of those who sustain a proximal femoral fracture in terms of age although we report a male preponderance. The importance of surgical technique in the placement of a correctly sized and aligned stem, particularly in those patients undergoing hip replacement for a neck of femur fracture is highlighted., Competing Interests: Declaration of conflicting interestsThe author(s) declared no potential conflicts of interest with respect to the research, authorship, and/or publication of this article.

Background: Periprosthetic femoral fractures (PFFs) remain a major concern following cementless total hip arthroplasty (THA). This study aimed to evaluate the association between different types of cementless tapered stems and the risk of postoperative PFF., Methods: A retrospective review of primary THAs performed at a single center from January 2011 to December 2018 included 3,315 hips (2,326 patients). Cementless stems were classified according to their design. The incidence of PFF was compared between flat taper porous-coated stems (type A), rectangular taper grit-blasted stems (type B1), and quadrangular taper hydroxyapatite-coated stems (type B2). Multivariate regression analyses were performed to identify independent factors related to PFF. The mean follow-up duration was 61 months (range, 12 to 139). Overall, 45 (1.4%) postoperative PFFs occurred., Results: The incidence of PFF was significantly higher in type B1 stems than in type A and type B2 stems (1.8 versus 0.7 versus 0.7%; P = .022). Additionally, more surgical treatments (1.7 versus 0.5 versus 0.7%; P = .013) and femoral revisions (1.2 versus 0.2 versus 0%; P = .004) were required for PFF in type B1 stems. After controlling for confounding variables, older age, diagnosis of hip fracture, and use of type B1 stems were significant factors associated with PFF., Conclusion: Type B1 rectangular taper stems were found to have higher risks for postoperative PFF and PFF requiring surgical management than type A and type B2 stems in THA. Femoral stem geometry should be considered when planning for cementless THA in elderly patients who have compromised bone quality., (Copyright © 2023 Elsevier Inc. All rights reserved.)

Introduction: The purpose of this study was to report mid-term clinical and radiographic results after hip arthroplasty revision in Vancouver type B2 femoral periprosthetic fractures (PPFx). Specifical focus of the paper is as follows: (1) the description of a standardized and reproducible surgical technique, (2) functional outcomes presentation and (3) type and number of complications and implants' survival rate analysis., Methods: We retrospectively reviewed all patients treated for hip revision with non-modular tapered fluted titanium stem in patients with Vancouver type B2 femur PPFx at a single institution. At least 18 months' follow-up period was required. Harris Hip Scores and SF-12 were obtained, and radiographical follow-up was performed. Complications were reported and analyzed., Results: The authors included 114 patients (114 hips) with a mean follow-up of 62.8 ± 30.6 months. All patients were treated with Wagner SL revision hip stem (Zimmer-Biomet), metal cerclage wires ± trochanteric plate. The mean HHS and SF-12 score at the last follow-up evaluation were respectively 81.3 ± 9.7 and 32.5 ± 7.6. Seventeen (14.9%) complications occurred. We observed five cases of dislocations, two of periprosthetic joint infections and six cases of new PPFx. The stem-related revision rate for any cause at the final FU was 1.7%, due to PJI. No patients underwent stem revision surgery for aseptic loosening. Fracture healed in all the included patients with a union-rate of 100%. The re-operation rate for any cause was 9.6%, with an implant survival rate for overall failure of 96.5%., Conclusion: The presented standard and reproducible surgical technique obtains optimal clinical and radiological results with limited complication rate at mid-term follow up. Preoperative planning as well as careful intraoperative surgical technique is of a paramount importance., (© 2023. The Author(s).)

Introduction: The true incidence of periprosthetic femoral fracture (PFF) around cemented polished taper-slip implants remains largely unknown. Registries usually only capture PFFs that result in revision, missing those managed non-operatively or treated by open reduction and internal fixation (ORIF). This study reports the long-term rate of PFF with the original triple-tapered C-stem femoral implant., Materials and Methods: A prospective review of a consecutive series of 500 primary total hip arthroplasties (THAs) performed at a single centre between March 2000 and December 2005, with average follow-up of 15 years (12-19 years)., Results: There were 500 consecutive THAs in 455 patients. Seven PFFs (1.4%) occurred in seven patients at an average of 7.9 years (range 2-11.5) from the primary arthroplasty. Five PFFs were managed by ORIF, one Vancouver B3 fracture was revised for a loose implant and one patient was treated non-operatively. Average age at primary operation was 74 years (67-87) and BMI averaged 27.3 (22-31). There was no typical fracture pattern and no statistically significant associations with patient demographics (age, gender, BMI, diagnosis) or prosthetic details (size, offset, alignment, cement mantle, subsidence). Survivorship to the occurrence of PFF was 99% (97.3-99.6%) at 10 years and 97.8% (95.5-99.0%) at 15., Conclusion: A PFF rate of 1.4% at an average follow-up of 15 years represents the true incidence of PFF with the use of the original triple-tapered C-Stem femoral implant, similar to that of published Exeter series (1.85%) but lower than the CPT (3.3%)., (© 2022. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Objective: To determine if screw fixation across a cement mantle is safe and effective during plate fixation of well-fixed periprosthetic femur fractures., Design: Retrospective cohort study., Setting: Academic Level I Trauma Center., Patients: Twenty-eight patients with AO/OTA 32A[B1] or 32A[C] periprosthetic femur fractures treated with open reduction and internal plate and screw fixation after cemented or uncemented hip arthroplasty., Intervention: Screw placement into the cement mantle during internal fixation., Outcome Measurements: Primary outcome was revision arthroplasty for aseptic loosening. Secondary outcomes included radiographic evidence of aseptic loosening, infection, nonunion, implant failure, and overall reoperation rate., Results: There were 28 patients who met inclusion criteria. A total of 9 patients had screws placed in the cement mantle while the remaining 19 patients had screws placed around an uncemented stem. At a mean of 3.7-year follow-up, there were no cases of revision arthroplasty or aseptic loosening in either group. There were no significant differences in rates of infection, nonunion, implant failure, or reoperation rate between patients who had screw placement into a cement mantle vs around an uncemented stem., Conclusion: Drilling into the cement mantle during fixation of a periprosthetic femur fracture around a well-fixed cemented hip stem appears safe and effective. When possible, surgeons can consider bicortical screws around a cemented stem, given the biomechanical advantages over unicortical screw or cerclage fixation. Larger prospective trials confirming the safety of this technique are warranted prior to routine implementation., Level of Evidence: III., (© 2022. The Author(s), under exclusive licence to Springer-Verlag France SAS, part of Springer Nature.)

Background: Periprosthetic femur fracture (PPFx) is a devastating complication after total hip arthroplasty (THA). Despite concerns for increased PPFx, cementless fixation predominates in the United States. This study used the American Joint Replacement Registry to compare PPFx risk between cemented and cementless femoral fixation for THA., Methods: An analysis of primary THA cases in patients aged 65 years and more was performed with the American Joint Replacement Registry data linked to Centers for Medicare and Medicaid Services data from 2012 to 2020. Analyses compared cemented to cementless femoral fixation. We identified 279,052 primary THAs, 266,040 (95.3%) with cementless and 13,012 (4.7%) with cemented femoral fixation. Cox proportional hazard regression analyses evaluated the association of fixation and PPFx risk, while adjusting for sex, age, and competing risk of mortality. Cumulative incidence function survival curves evaluated time to PPFx., Results: Age ≥ 80 years (P < .0001) and women (P < .0001) were associated with PPFx. Compared to cemented stems, cementless stems had an elevated risk of PPFx (Hazards Ratio 7.70, 95% Confidence interval 3.2-18.6, P < .0001). The cumulative incidence function curves demonstrated an increased risk for PPFx across all time points for cementless stems, with equal magnitude of risk to 8 years.` CONCLUSION: Cementless femoral fixation in THA continues to predominate in the United States, with cementless femoral fixation demonstrating increased risk of PPFx in patients aged 65 years or more. Surgeons should consider greater use of cemented femoral fixation in this population to decrease the risk of PPFx., (Copyright © 2023 Elsevier Inc. All rights reserved.)

Background: Fracture of contemporary femoral stems is a rare occurrence in total hip arthroplasty. A knowledge gap remains regarding manufacturing, patient, and surgeon factors that may contribute to the increased risk of this complication., Methods: We analyzed 13 contemporary fractured porous-coated femoral stems of various designs to determine cause and contributing factors of mechanical failure. Cases included 12 men and 1 woman who had an average age at index surgery of 53 years (range, 34 to 76 years). There were 10 of 13 patients who had a body mass index more than 30 (obese); 3 of the 10 had a body mass index more than 40. The mean time to fracture was 7.6 years (range, 7 months to 12 years)., Results: There were 4 titanium alloy stems that fractured an average of 3.6 years postrevision surgery for head/cup exchange and had associated iatrogenic mechanical and electrocautery damage to the femoral neck at fracture initiation sites. There were 6 modular stems that failed at the stem-sleeve or stem-neck interfaces with evidence of fretting corrosion. For 2 stem-neck fractures, mismatched head/stem combinations from different manufacturers resulted in untested mechanical offsets and loading. There were 2 proximal neck fractures and 1 mid-shaft fracture of coated cobalt-chromium alloy stems that occurred in 3 obese men. The neck fractures (10 to 12 years) were well-fixed stems. Lack of proximal fixation contributed to the mid-shaft fracture (7 months)., Conclusion: While rare, femoral stem fractures pose catastrophic outcomes in primary and revision total hip arthroplasty. Manufacturing, patient, and surgical factors contributing to stem failures were identified, including patient obesity, heat-treatment reduction of mechanical properties, iatrogenic implant damage, and mixing of different vendor stems and heads., (Copyright © 2023 Elsevier Inc. All rights reserved.)

Background: Many risk factors have been described for periprosthetic femur fracture (PPFFx) following total hip arthroplasty (THA), yet a patient-specific risk assessment tool remains elusive. The purpose of this study was to develop a high-dimensional, patient-specific risk-stratification nomogram that allows dynamic risk modification based on operative decisions., Methods: We evaluated 16,696 primary nononcologic THAs performed between 1998 and 2018. During a mean 6-year follow-up, 558 patients (3.3%) sustained a PPFFx. Patients were characterized by individual natural language processing-assisted chart review on nonmodifiable factors (demographics, THA indication, and comorbidities), and modifiable operative decisions (femoral fixation [cemented/uncemented], surgical approach [direct anterior, lateral, and posterior], and implant type [collared/collarless]). Multivariable Cox regression models and nomograms were developed with PPFFx as a binary outcome at 90 days, 1 year, and 5 years, postoperatively., Results: Patient-specific PPFFx risk based on comorbid profile was wide-ranging from 0.4-18% at 90 days, 0.4%-20% at 1 year, and 0.5%-25% at 5 years. Among 18 evaluated patient factors, 7 were retained in multivariable analyses. The 4 significant nonmodifiable factors included the following: women (hazard ratio (HR) = 1.6), older age (HR = 1.2 per 10 years), diagnosis of osteoporosis or use of osteoporosis medications (HR = 1.7), and indication for surgery other than osteoarthritis (HR = 2.2 for fracture, HR = 1.8 for inflammatory arthritis, HR = 1.7 for osteonecrosis). The 3 modifiable surgical factors were included as follows: uncemented femoral fixation (HR = 2.5), collarless femoral implants (HR = 1.3), and surgical approach other than direct anterior (lateral HR = 2.9, posterior HR = 1.9)., Conclusion: This patient-specific PPFFx risk calculator demonstrated a wide-ranging risk based on comorbid profile and enables surgeons to quantify risk mitigation based on operative decisions., Level of Evidence: Level III, Prognostic., (Copyright © 2023 Elsevier Inc. All rights reserved.)

Background: Due to increasing volume of total hip arthroplasties, periprosthetic femoral fractures have become a common complication with increased revision burden and perioperative morbidity. The objective of this study was to evaluate the fixation stability of Vancouver B2 fractures treated with 2 techniques., Methods: A common B2 fracture was created by reviewing 30 type B2 cases. The fracture was then reproduced in 7 pairs of cadaveric femora. The specimens were divided into 2 groups. In Group I ("reduce-first"), the fragments were reduced first, followed by implantation of a tapered fluted stem. In Group II ("ream-first"), the stem was implanted in the distal femur first, followed by fragment reduction and fixation. Each specimen was loaded in a multiaxial testing frame with 70% of peak load during walking. A motion capture system was used to track the motion of the stem and fragments., Results: The average stem diameter in Group II was 16.1 ± 0.4 mm, versus 15.4 ± 0.5 mm in Group I. The fixation stability was not significantly different in the 2 groups. After the testing, the average stem subsidence was 0.36 ± 0.31 mm and 0.19 ± 0.14 mm (P = .17) and the average rotation was 1.67 ± 1.30° and 0.91 ± 1.11° (P = .16) in Groups I and II, respectively. Compared to the stem, there was less motion of the fragments and there was no difference between the 2 groups (P > .05)., Conclusions: When tapered fluted stems were used in combination with cerclage cables for treatment of Vancouver type B2 periprosthetic femoral fractures, both the "reduce-first" and "ream-first" techniques showed adequate stem and fracture stability., (Copyright © 2023 Elsevier Inc. All rights reserved.)

The Unified Classification System (UCS), or Vancouver system, is a validated and widely used classification system to guide the management of periprosthetic femoral fractures. It suggests that well-fixed stems (type B1) can be treated with fixation but that loose stems (types B2 and B3) should be revised. Determining whether a stem is loose can be difficult and some authors have questioned how to apply this classification system to polished taper slip stems which are, by definition, loose within their cement mantle. Recent evidence has challenged the common perception that revision surgery is preferable to fixation surgery for UCS-B periprosthetic fractures around cemented polished taper slip stems. Indications for fixation include an anatomically reducible fracture and cement mantle, a well-fixed femoral bone-cement interface, and a well-functioning acetabular component. However, not all type B fractures can or should be managed with fixation due to the risk of early failure. This annotation details specific fracture patterns that should not be managed with fixation alone., Competing Interests: C. E. H. Scott reports grants from Stryker, consulting fees from Stryker and Smith & Nephew, participation on an advisory board for Pfizer, and board membership of The Bone & Joint Journal, unrelated to this article. S. Jain reports consulting fees from Stryker, unrelated to this article. M. Moran reports payment or honoraria for lectures, presentations, speakers bureaus, manuscript writing or educational events from Stryker, unrelated to this article. F. S. Haddad reports board membership of The Bone & Joint Journal and the Annals of the Royal College of Surgeons, grants or contracts from Stryker, Smith & Nephew, and Corin, consulting fees from Stryker, ayment or honoraria for lectures, presentations, speakers bureaus, manuscript writing or educational events, from Stryker, Smith & Nephew, Zimmer Biomet, and AO Recon, royalties or licenses from Smith & Nephew, MatOrtho, Corin, and Stryker, and support for attending meetings and/or travel from Stryker, Smith & Nephew, The Bone & Joint Journal and AO Recon, all of which are unrelated to this article., (© 2023 The British Editorial Society of Bone & Joint Surgery.)

Background: Periprosthetic femoral fractures (PFFs) in total hip arthroplasty (THA), especially those in contact with the diaphyseal stem, carry high morbidity. This study evaluated how stem design influences the risk of early Vancouver B PFF or other PFF requiring operative intervention after THA., Methods: A multicenter, retrospective study of 3,433 primary cementless THAs performed from 2014 to 2021 included 2,302 single-taper (micro M/L [n = 1,169]; M/L [n = 1,133]) and 1,131 double-taper (fit-and-fill [n = 420]; compaction-collared [n = 711]) stems. Mean follow-up was 2.2 years (range, 0.3 to 6.5 years). Primary outcomes were Vancouver B and surgically treated postoperative PFFs among differing femoral stems. Secondary outcomes included rates of intraoperative and postoperative Vancouver A and C PFFs., Results: Forty five postoperative PFFs (1.3%) occurred within 8.8 weeks (median), 25 of which were Vancouver B (0.7%) and 20 total PFFs that required operative intervention (0.6%). Compaction-collared stems had a decreased risk of Vancouver B (hazard ratio 0.18, 95% confidence interval: 0.03-0.97 P = .044) and any surgically treated PFF (hazard ratio 0.10, 95% confidence interval: 0.01-0.95; P = .037). Intraoperative PFFs were most common with fit-and-fill stems (3.6%, P < .001) and Vancouver A with compaction-collared stems (1.8%, P < .001). The cohort with PFF had a higher Charlson comorbidity index (P = .004), more women (P = .001), more Dorr A or C femora (P = .013), and more posterior or lateral surgical approaches compared to those without PFF (P ≤ .001)., Conclusion: After controlling for confounding variables, compaction-collared stems had a significantly lower risk of postoperative Vancouver B and PFF requiring operative treatment than single-taper and double-taper stems., (Copyright © 2022 Elsevier Inc. All rights reserved.)

Background: The incidence of periprosthetic femur fracture (PPFF) in the setting of total hip arthroplasty (THA) is steadily increasing. We seek to address whether there is a difference in outcomes between Vancouver B fracture types managed with ORIF when the original stem was a press-fit stem versus a cemented stem., Methods: In this retrospective cohort study at a level 1 trauma center, we identified 136 patients over 65 years-of-age with Vancouver B-type fractures sustained between 2005 and 2019. Patients were treated by ORIF and had either cemented or press-fit stems prior to their injury. Outcomes were subsidence of the femoral implant, time to full weight bearing, rate of the hip implant revision, estimated blood loss (EBL), postoperative complications, and the one-year mortality rate., Results: A total of 103 (75.7%) press-fit and 33 (24.3%) cemented patients were reviewed. Patient baseline characteristics, Vancouver fracture sub-types, and implant characteristics were not found to be significantly different between groups. The difference in subsidence rates, postoperative complications, and time to weight bearing were not significantly different between groups. EBL and one-year mortality rate were significantly higher in the cemented group., Conclusions: In geriatric patients with Vancouver B type periprosthetic fractures managed with ORIF, patients with an originally press fit stem may have lower mortality, lower estimated blood loss, and similar subsidence and hospital length of stays when compared to those with a cemented stem., (© 2023. The Author(s).)

Introduction: Periprosthetic femoral fractures are an increasingly common post-operative complication of total hip arthroplasty (THA). Though varus malalignment is known to increase fracture risk in standard-length femoral stems, varus malalignment is not as well studied in short stems. Therefore, the purpose of this study was to determine if varus malalignment contributes to early periprosthetic fracture risk in a cementless taper-wedged, short femoral stem., Materials and Methods: This retrospective review included 366 consecutive patients (441 THAs) having undergone THA via anterior approach by a single surgeon between July 2014 and December 2016. All patients received the same short, cementless femoral stem. Femoral component angle was measured on 6-week post-THA weight-bearing radiographs, with malalignment defined as a femoral component angle exceeding 0° ± 3°. Periprosthetic femoral fracture and aseptic loosening occurring within 2 years post-THA were recorded., Results: The final data analysis included 426 hips with a mean follow-up time of 32.9 ± 10.2 months. Varus and neutral alignment occurred in 84 (19.6%) and 342 (79.9%) of stems, respectively. Three (0.7%) periprosthetic femoral fractures occurred within 2 years, all occurring in patients with neutrally aligned femoral stems. One (0.2%) stem failed due to aseptic loosening and was malaligned., Conclusion: Despite nearly 20% of stems placed in varus alignment, three of the four early complications occurred in a neutrally aligned stem. Based on these results, forceful intraoperative realignment of a short femoral stem with good initial fixation may present an unnecessary increased risk of intraoperative fracture., (© 2021. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

The incidences of periprosthetic fracture and periprosthetic joint infection after total hip arthroplasty are expected to increase exponentially over the coming decades. Epidemiologic data suggest that many periprosthetic fractures after THA occur concurrently with a loose femoral implant. Recent studies suggest an approximately 8% incidence of indolent infection in cases of suspected aseptic loosening. The available data, therefore, suggest that periprosthetic fracture and infection may coexist, and this possibility should be considered, particularly in patients with a loose femoral stem and high pretest possibility. Although currently limited, the available literature provides some guidance as how to manage this complex issue., (Copyright © 2022 by the American Academy of Orthopaedic Surgeons.)

Introduction: A new type of periprosthetic fracture, between Vancouver-SoFCOT types A and B, was recently described and labeled "new B2". It occurs intraoperatively or in the early postoperative period, on cementless implants, and features a posteromedial cortical fragment around the lesser trochanter. The main aim of the present study was to report clinical and radiological results in a series of 33 cases of what is better called Vancouver B-lesser trochanter (VB-LT) fracture. The secondary objective was to identify risk factors. The study hypothesis was that VB-LT fracture might occur in the late postoperative course., Material and Method: A2 single-center retrospective study included all patients with postoperative periprosthetic VB-LT fracture diagnosed on standard X-ray. Treatment was operative or non-operative depending on femoral implant subsidence and the patient's general health status., Results: There were 33 VB-LT fractures out of 445 periprosthetic femoral fractures (7.5%), in 27 women and 6 men; all were postoperative, at a mean 47 months (range, 1 day to 20 years). Mean subsidence of the femoral stem was 8.8mm, in 73% of cases (24 out of 33 implants). The 9 VB-LT1 fractures (without subsidence) were treated non-operatively, without secondary displacement. Thirteen of the 24 VB-LT2 fractures (with subsidence) were managed by stem exchange and cerclage; 3 other patients had isolated stem exchange, 2 had isolated internal fixation by cerclage, and 6 in poor health were managed non-operatively. At a mean 28 months' follow-up (range, 6-48 months), mean PMA score was 15.5 (range, 10-18), Harris Hip score 72.4 (range, 43-100) and Parker score 7.2 (range, 4-9). All cases showed osseointegration and implant stability; there was 1 case of non-union, without impact on stability., Conclusion: Postoperative Vancouver B-lesser trochanter fracture seemed specific to cementless implants and did not occur exclusively in the early postoperative period. Non-operative treatment gave good results when there was no implant subsidence (type VB-LT1)., Level of Evidence: IV, retrospective., (Copyright © 2022 Elsevier Masson SAS. All rights reserved.)

Background and Aim: Number of hip prosthesis implants in arthritis, number of patients treated with bisphosphonates to prevent fragility fractures and, together, number of atypical femoral fracture's cases are increasing., Case Series: This article describes two cases of hip arthritis, treated with hip replacement, in patients using bisphosphonates for a long time; in both cases an incomplete atypical femoral fracture was misdiagnosed before the surgery. Authors describe the importance to carry out a complete osteometabolic and radiographic pre-operative examination of patients in treatment with bisphosphonates going to hip replacement, to check the possible presence of incomplete atypical femoral fracture and to optimize surgical and pharmacological treatment., Conclusions: In hip prosthesis surgery, prior diagnosis of incomplete atypical femoral fractures can indicate the choice of a different kind of prosthesis stem to optimize surgical results. This can also positively impact to rehabilitation in term of duration and daily activities recovery.

Background: Modular fluted tapered (MFT) stems have advanced treatment of Vancouver B2 and B3 periprosthetic femoral fractures, but series to date have been limited with respect to cohort size and follow-up duration. The purpose of this study was to determine implant survivorship, radiographic results, complications, and clinical outcomes of Vancouver B2 and B3 periprosthetic femoral fractures treated with MFT stems in a large series of patients., Methods: We identified 171 Vancouver B2 (109) and B3 (62) periprosthetic femoral fractures treated with an MFT stem between 2000 and 2018 using our institutional total joint registry. The mean age was 75 years, 50% were female, and the mean body mass index was 29 kg/m2. The median stem diameter was 18 mm and median stem length was 210 mm. The cumulative incidences of revision and reoperation with death as the competing risk were calculated, radiographs were reviewed, and clinical outcomes were evaluated using the Harris hip score (HHS). The mean follow-up was 5 years., Results: The 10-year cumulative incidence of any revision was 10%. There were 17 revisions, of which only 3 were for the distal fluted portion of the MFT stem. Revision indications included periprosthetic joint infection (PJI) (n = 6) and dislocation (n = 11). The 10-year cumulative incidence of any reoperation was 15%. In addition to the above 17 revisions, there were 7 reoperations for superficial wound complications (n = 4), Vancouver B1 periprosthetic femoral fracture (n = 1), vascular occlusion (n = 1), and acetabular cartilage degeneration requiring an acetabular component (n = 1). Radiographically, there was 1 fracture nonunion. All unrevised MFT stems were radiographically well fixed. Subsidence of ≥5 mm occurred in 11%, but all implants were stable at the most recent follow-up. The mean HHS was 75 at 2 years (n = 71)., Conclusions: In this large series of 171 Vancouver B2 and B3 periprosthetic femoral fractures treated with MFT stems, we found that such constructs were associated with a high rate of fracture healing and provided extremely reliable and durable implant fixation, with no revisions for aseptic loosening. Dislocation and PJI were the most common complications., Level of Evidence: Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence., Competing Interests: Disclosure: The Disclosure of Potential Conflicts of Interest forms are provided with the online version of the article (http://links.lww.com/JBJS/H64)., (Copyright © 2022 by The Journal of Bone and Joint Surgery, Incorporated.)

Background: Periprosthetic femoral fracture (PFF) is well-known complication in cementless hip arthroplasty (HA), especially in the elderly with osteoporosis. To prevent intraoperative PFFs during HA, prophylactic cerclage wiring on the calcar area during femoral broaching and implant insertion is recommended. However, biomechanical data on the benefits of cerclage wiring in osteoporotic bone during impaction are limited and controversial. This study aimed to assess the efficacy of prophylactic double-looped cerclage wiring (PDLCW) during femoral broaching in the osteoporotic bone model with an impaction simulation system., Methods: Fifteen osteoporotic femur models were prepared and allocated to three groups; control group (no cerclage), PW group (received PDLCW), and CC+PW group (prepared as having calcar crack and received PDLCW). All femurs were broached under impaction force that sequentially increased until the visible fracture or calcar crack propagation was visible. The primary outcomes were mallet impaction force (MIF-CF) and mallet velocity (MV-CF) at the time of calcar fracture. The secondary outcomes were calcar fracture pattern and subsidence during calcar fracture (S-CF)., Results: PW group showed a significant increase in average MIF-CF, by 40.4% and 120.2% (p<0.001) compared to the control and CC+PW groups, respectively. The average MV-CF in PW group was also significantly greater, 13.1% and 64.6% (p<0.001), compared to the control and CC+PW groups, respectively. Control group revealed significantly greater incidence of complete calcar fracture (60% vs. 0% vs. 0%, p = 0.024), and the highest S-CF compared to those in the PW and CC+PW groups (10.6 ± 6.0 mm, 6.7 ± 4.4 mm, and 1.3 ± 2.0 mm, p = 0.020)., Conclusions: This study showed that PDLCW significantly improved hoop stress resistance by increasing the calcar fracture threshold related to mallet impaction, decreasing the risk of complete calcar fracture., Competing Interests: Declarations of Interest None, (Copyright © 2022. Published by Elsevier Ltd.)

Background: Known risk factors for early periprosthetic femur fracture (PFF) following total hip arthroplasty (THA) include poor bone quality and the use of cementless implants. The association between femoral component size and alignment and the risk of early PFF is not well described. We evaluated radiographic parameters of femoral component sizing and alignment as risk factors for early PFF., Methods: From 16,065 primary cementless THAs, we identified 66 cases (0.41%) of early PFFs (<90 days from index THA) at a single institution between 2016 and 2020. Sixty early PFFs were (1:2) matched to 120 controls based on the femoral component model, offset, surgical approach, age, body mass index (BMI), and gender. Radiographic assessment of preoperative bone morphology and postoperative femoral component orientation included stem alignment, metaphyseal fill, and implant congruence with medial cortical bone. A multivariable logistic regression was built to identify radiographic risk factors associated with early PFF., Results: Markers of preoperative bone quality including canal calcar ratio (P = .003), canal flare index (P < .001), anteroposterior canal bone ratio (CBR) (P < .001), and lateral CBR (P < .001) were statistically associated with PFF. Distance between the medial cortical bone and implant was greater in cases of PFF (2.5 mm vs 1.4 mm) (P < .001). A multivariate analysis demonstrated that a larger lateral metaphyseal CBR (Odds Ratio [OR] 5), valgus implant alignment (OR 5), and medial implant-bone incongruity (OR 2) increased the risk of early PFF., Conclusion: A larger lateral metaphyseal CBR, valgus component alignment, and implant incongruity with medial cortical bone posed the greatest radiographic risk for early PFF following cementless THA., (Copyright © 2022 Elsevier Inc. All rights reserved.)

Introduction: Periprosthetic femoral fractures (PFF) are detrimental for patients. Vancouver B2 fractures about a cemented stem can be revised to a longer uncemented stem or using an in-cement revision, if the cement mantle is adequate. There are reports documenting the success of both techniques. The aim of this single centre study was to perform a direct comparison of these two procedures., Materials and Methods: A retrospective study of consecutive Vancouver B2 PFFs around a cemented stem during 16 years was performed. All study cases were treated either using an in-cement revision or with an uncemented stem revision. Preoperatively, the groups were compared based upon age, gender, ASA, BMI, and Charlson comorbidity score. The outcome measures were surgical time, complications, in-hospital stay, revisions, 1-year readmission rate, and survivorship., Results: After a median of 3.5 years, there were 70 patients in the uncemented and 31 in the in-cement group. There was no difference in any of the preoperative variables. Surgical time was shorter for in-cement revisions by a mean of 45 min (p < 0.001). There was no difference in in-hospital stay, surgical complications or readmissions. Implant survival at 5 years was 93.5% for the in-cement and 94.4% for the uncemented revision (p = 0.946). Patient survivorship at 5 years was 62.5% for the in-cement and 69.8% for the uncemented group (p = 0.094)., Conclusions: This study demonstrates that in-cement revision is a valid treatment option for Vancouver B2 fractures, comparable to uncemented stem revision, if certain criteria are met. There was no difference in revision rate, patient survivorship, complications, readmissions or in-hospital stay., (© 2021. The Author(s), under exclusive licence to Springer-Verlag GmbH, DE part of Springer Nature.)

Background: The use of total hip arthroplasty (THA) femoral stems that transmit force in a favourable manner to the femur may minimise periprosthetic fractures. Finite element analysis (FEA) is a computerised method that analyses the effect of forces applied to a structure with complex shape. Our aim was to apply FEA to compare primary THA cementless stem designs and their association with periprosthetic fracture risk., Methods: 3-dimensional (3D) models of a Dorr Type A femur and 5 commonly used primary THA cementless stem designs (short single wedge, standard-length single wedge, modular, double-wedge metaphyseal filling, and cylindrical fully coated) were developed using computed tomography (CT) imaging. Implant insertion, single-leg stance, and twisting with a planted foot were simulated. FEA was performed, and maximum femoral strain along the implant-bone interface recorded., Results: Femoral strain was highest with short single-wedge stem design (0.3850) and lowest with standard-length single-wedge design (0.0520). Location of maximum femoral strain varied by stem design, but not with implant insertion, single-leg stance, or twisting with a planted foot. Strain was as high during implant insertion as with single-leg stance or twisting with a planted foot., Conclusions: Our results suggest the risk of intraoperative and postoperative periprosthetic fracture with THA in a Dorr A femur is highest with short single-wedge stems and lowest with standard-length single-wedge stems. Consideration may be given to minimising the use of short single-wedge stems in THA. Implant-specific sites of highest strain should be carefully inspected for fracture.

Background and Purpose: Intraoperative periprosthetic femoral fractures (IPFFs) can occur during primary total hip arthroplasty (THA). We describe the incidence of IPFFs during THA in Norway and estimate potential risk factors that could be associated with IPFF Patients and methods - Data from the Norwegian Arthoplasty Register (1987-2020) was used: 2,268 IPFFs from 218,423 primary THAs in 172,598 patients. The following factors were analyzed: sex, age, diagnosis, previous operation on the same hip, surgical approach, and stem fixation technique. Association of these factors with IPFF risk was assessed using multivariable Poisson regression., Results: IPFF occurred during 2,268 operations with an incidence of 1.0% among all primary THAs. The risk of IPFF was associated with female sex (relative risk 1.8; 99% CI 1.5-2.1), age 80-90 years and age over 90 years (compared with age 60-70 years: 1.3; CI 1.0-1.6 and 2.6; CI 1.6-4.3, respectively), non-osteoarthritis diagnoses (2.2; CI 1.9-2.6), previous surgery to the same hip (1.8; CI 1.5-2.2), lateral approach (compared with the posterior approach: 1.5; CI 1.1-2.0), and cementless stem fixation (2.7; CI 2.0-3.6)., Interpretation: Surgeons should be aware of the factors associated with an increased risk of IPFF: female sex, age above 80 years, non-osteoarthritis diagnoses, and previous surgery to the same hip. Cemented stem fixation and posterior approach should be favored in high-risk patients, such as elderly women.

Background: Postoperative periprosthetic fracture of the femur (POPFF) is associated with increased mortality. There is a lack of general estimates of mortality after POPFF and a need for higher-level evidence in this area. The aim of this study was to estimate mortality after POPFF using data reported in cohort studies from the last decade., Methods: Literature search was conducted using Medline and Embase. The primary outcome was all-cause mortality during time as an inpatient, within 30 days, within 90 days, and within one year of POPFF. Mortality (95% confidence interval [CI]) was estimated using metaregression., Results: A total of 4841 patients from 35 cohort studies were included. Study quality was generally low. The weighted mean follow-up was 2.3 years, and the most common POPFF was Vancouver B. The pooled mortality as an inpatient was 2.4% (95% CI 1.6% to 3.4%). The pooled mortality within 30 days was 3.3% (95% CI 2.0% to 5.0%). The pooled mortality within 90 days was 4.8% (95% CI 3.6% to 6.1%). The pooled mortality within one year was 13.4% (95% CI 11.9% to 14.8%). Mortality after POPFF was like that of neck of femur fracture up to 30 days, but better at one year., Conclusion: Mortality is like that experienced by patients after neck of femur fracture up to 30 days, but better at one year, which may represent the lower underlying risk of death in the POPFF cohort. These results may form the basis for evaluation of services treating POPFF in the future., (Crown Copyright © 2021. Published by Elsevier Inc. All rights reserved.)

Background: The periprosthetic femoral fracture is one of the most severe complications after total hip arthroplasty and is associated with an increased mortality. The underlying causes and the patient- and implant-specific risk factors of periprosthetic femoral fractures remain insufficiently understood. The aim of this study was to gain a more profound understanding of the underlying fracture mechanisms and to provide experimental datasets for validation of computational models., Methods: Six cadaveric femurs were implanted with straight hip stems (Zweymueller design) and loaded until fracture reproducing the clinically relevant load cases stumbling and sideways fall. Displacements and the strain distribution on the surface of the femurs and implants, as well as the fracture load and implant subsidence were measured., Findings: For the load case stumbling the mean fracture load was 6743 N and two different mechanisms leading to fracture could be identified: high subsidence with low femoral bending and small subsidence with high femoral bending. For the load case sideways fall the mean fracture load was 1757 N and both tested femurs fractured due to a rotation of the hip stem around its own axis. The detailed datasets provided by this study can be used in future computational models., Interpretation: We demonstrated that the underlying fracture mechanisms of periprosthetic femoral fractures can be fundamentally different in the load case stumbling. The seating and exact position of the hip stem in the femur may correlate with implant subsidence and therefore lead to different types of fracture mechanisms resulting in different patient-specific fracture risks., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Purpose: The aim of the present study was to review the outcome of the surgical treatment of 54 periprosthetic femoral fractures (PFF) after total hip arthroplasty at a mean follow-up of 45 months. At final follow-up, the clinical outcome was measured using the Harris Hip score (HHS), the Karnofsky score (KS), while, the radiographic results were evaluated using the Beals and Tower's criteria., Results: There were 13 post-operative complications that occurred in 10 patients with an overall re-operation rate of 11%. At final follow-up the mean HHS was 64 (range 20-100) and the mean KS was 66 (range 30-100). The radiological results were excellent in 89%, good in 9% and poor 2% of patients. The mortality rate was 0% at 3 months and 3.7% at one year post-operatively. The mean last HHS and KS of patients older than 75 years or with comorbidities were lower than that of patients younger than 75 years or without comorbidities., Conclusions: Although this study have shown that the surgical treatment of PFF was associated with a low re-operative rate, a good to excellent radiological results and a low mortality rate at 3 months and 1 year postoperatively, there was a marked functional deterioration in many patients. This decline of function could be attributed to the advanced age of patients and the presence of comorbidities.

Background: In 2016, the CPT stem replaced the Exeter stem as the main cemented stem at our institution. We assessed the prevalence of revision for periprosthetic femoral fracture (PFF) in patients operated on with either CPT or Exeter stem and compared the risk for revision between these stems., Methods: Primary total hip arthroplasties either performed in 2012-2015 with Exeter stem (n = 1443) or in 2017-2018 with CPT stem (n = 1322) were included. The prevalence of revision for PFF was compared. The Kaplan-Meier estimated survivorships were calculated for the 2 stem designs. The risk for revision was analyzed using the Cox proportional hazard regression model., Results: At 2 years, PFF was the most common reason for revision in the study population (1.3% prevalence, comprising 35% of all revisions). Moreover, 1.6% (95% confidence interval [CI] 1.0-2.4) of the CPT and 1.0% (95% CI 0.6-1.6) of the Exeter stems had been revised due to PFF. The 3-year Kaplan-Meier probability estimates for all-cause revision were 4.8% for the CPT (95% CI 3.6-6.0) and 3.3% for the Exeter stem (95% CI 2.3-4.3). The hazard ratio for revision due to any reason was 1.1 (95% CI 0.3-3.8) during the first 2 weeks, and 1.8 (95% CI 1.2-2.7, P = .006) from 2 weeks onwards for the CPT compared with the Exeter stem., Conclusion: The considerable number of PFF revisions with taper-slip stems, especially with CPT stems, is a matter of concern. Alternative cemented stems should be considered in patients at high risk for PFF., (Copyright © 2021 Elsevier Inc. All rights reserved.)

Background: Periprosthetic femur fractures (PFF) involving primary total hip arthroplasty (THA) remain a significant concern. The purpose of this study was to evaluate the effect of surgical approach during primary THA on early PFF with respect to fracture timing, incidence, radiographic parameters, and surgery-related factors., Methods: A retrospective review of all patients with PFF during or after primary THA from 2011 to 2019 was conducted at a single, urban academic institution. Of the study cohort of 11,915 patients, 79 patients with PFF were identified (0.66%). Direct anterior (DA), posterior anterior (PA), and laterally based (LA) cohorts were formed based on the surgical approach. PA and LA groups were combined to form a nonanterior (NA) cohort. Radiographic parameters, surgical factors, and fracture mechanism were analyzed., Results: The incidence of fracture across approaches was 0.70% (33/4707; DA), 0.63% (35/5600; PA), and 0.68% (11/1608; LA) (P = .97). Time from THA to fracture was significantly shorter in the DA cohort (12.5 ± 14.1 days) than the NA cohort (48.2 ± 120.6 days) (P = .05). Postoperatively identified, atraumatic PFFs were more common in the DA cohort (78.3%, 18/23) than the NA cohort (51.6%, 16/31) (P = .045). There were no differences between groups in radiographic or other clinical parameters., Conclusion: Patients who underwent DA THA have significantly shorter time to PFF and were more often identified postoperatively with an atraumatic mechanism than patients who underwent NA approaches. The known difficulty in femoral exposure and stem placement with the DA approach may play a role in contributing to a higher rate of intraoperative or early postoperative PFF., (Copyright © 2021 Elsevier Inc. All rights reserved.)

Background and Aim: Proximal periprosthetic femoral fractures (PPFFs) are gradually increasing and surgical management is often associated to high risk of complications, due to elderly population and associated comorbidities. We retrospectively assessed 79 patients at 1- to 8-years follow-up, focusing on factors that may have affected results and complications., Methods: Seventy-nine PPFFs were classified according to Vancouver classification in: 4 type B1, 22 type B2, 29 type B3, 24 type C. The average age of the patients was 81.5 year-old (61-95). 37 PPFFs (12 type B2 and 25 type B3) were treated with uncemented tapered fluted revision stems (Link MP Recostruction Stem, Waldermar Link GmbH) and 42 patients with open reduction and internal fixation (ORIF). Patients were clinically and radiographically assessed at a mean 5-year follow-up (1-8 years). Elixhauser Comorbidity index was analysed., Results: All PPFFs, except two, healed within 10 months. Harris Hip score at follow-up was 65.6 in ORIF group and 79.8 in revision hip group (p<0.05). 35.7% and 32.4% had blood transfusions in ORIF and revision hip group respectively (p> 0.05). 5 patients in ORIF group and 2 patients in revision hip group died within 12 months from surgery (p<0.05)., Conclusions: Both ORIF and hip revision arthroplasty with modular uncemented tapered fluted stems are valid procedures for Vancouver B2 and B3 PPFFs. Restricted weight-bearing, high number of comorbidities with elevated Elixhauser Comorbidity Index and ORIF are associated to high 12-month mortality.

Case: A 62-year-old man who underwent total hip arthroplasty (THA) 17 years earlier presented with a fractured uncemented extensively coated diaphyseal engaging femoral stem. Treatment options, including revision surgery, were discussed, and the patient elected for nonoperative treatment. At 2 years of follow-up, the patient is asymptomatic, radiographs are stable, and he lives an active lifestyle without restrictions., Conclusion: Fractures of well-fixed femoral prostheses are rare complications of THA and almost universally require revision surgery. Nonoperative treatment without activity restrictions may be a viable treatment option in select patients to preserve function and maintain quality of life., Competing Interests: Disclosure: The Disclosure of Potential Conflicts of Interest forms are provided with the online version of the article (http://links.lww.com/JBJSCC/B597)., (Copyright © 2021 by The Journal of Bone and Joint Surgery, Incorporated.)

Background: A calcar collar may reduce risk of periprosthetic fracture of the femur, through collar contact. We estimated the effect of collar contact on periprosthetic fracture mechanics using a collared fully coated cementless femoral stem and then estimated the effect of initial calcar-collar separation on the likelihood of collar contact., Methods: Three groups of six composite left femurs with increasing calcar-collar separation in each group, underwent periprosthetic fracture simulation in a materials testing machine. Fracture torque and rotational displacement were measured and torsional stiffness and rotational work prior to fracture were estimated. Calcar collar contact prior to fracture was identified using high speed camera footage., Findings: Where calcar-collar contact occurred fracture torque was greater (47.33 [41.03 to 50.45] Nm versus 38.26 [33.70 to 43.60] Nm, p = 0.05), Rotational displacement was less (16.6 [15.5 to 22.3] degrees versus 21.2 [18.9 to 28.1] degrees, p = 0.07), torsional stiffness was greater (151.38 [123.04 to 160.42] rad.Nm -1 versus 96.86 [84.65 to 112.98] rad.Nm -1 , p < 0.01) and rotational work was similar (5.88 [4.67, 6.90] J versus 5.31 [4.40, 6.56] J, p = 0.6). Odds ratio (OR) of not achieving collar contact (95% confidence interval) increased 3.8 fold (95% CI 1.6 to 30.2, p < 0.05) for each millimetre of separation in the regression model. 95% chance of collar contact was associated with a separation of 1 mm or less., Interpretation: Surgeons should reduce calcar-collar separation at stem implantation to a maximum of 1 mm to increase the chance of calcar-collar contact during injury and reduce the risk of early post-operative femoral fracture., (Copyright © 2021. Published by Elsevier Ltd.)

Background: Periprosthetic femur fracture (PFF) remains a common reason for failure after total hip arthroplasty (THA). For over 10 years, our institution has performed both anterior approach (AA) and posterolateral (PL) approaches for primary THA with multiple stem designs. The aim of this study is to determine the 90-day relative risk of PFF with regard to approach and stem design., Methods: A retrospective review of our institutional database was performed on all patients undergoing primary THA from 2007 to 2018 using AA or PL approaches. Five surgeons performing 6309 THAs (AA = 4510; PL = 1799) using single-wedge taper (n = 2417) or fit-and-fill (n = 3892) stems were included. PFF occurring within 90 days of the index procedure were analyzed. Differences in PFF rates, fracture location, stem type, and treatment method were assessed. Comparisons were made using a Cox regression analysis., Results: The 90-day revision rate for fracture was 0.3%. Clinically significant fractures requiring cerclage cabling, stem change, revision, or open reduction internal fixation occurred in 0.9% of patients (intraoperative = 37, 0.6%; postoperative = 17, 0.3%). Cox regression found PFF risk was significant for female patients (P = .008), patients older than age 65 (P < .01), single-wedge taper stems (P = .05), and for cases with collarless stems (P = .04). Among PFF cases that required surgical intervention, risk factors were female sex, age older than 65, and body mass index under 25 (P < .05). Collarless stems were 2.6 times more likely to result in PFF than collared stems (P = .04). Single-wedge taper stems were 2.3 times more likely to result in PFF than fit-and-fill stems (P = .05). Approach was not found to be an independent risk factor for PFF (P = .85)., Conclusion: Our single-center experience demonstrates the risk of periprosthetic fracture within 90 days of surgery is significantly lower with collared stems and fit-and-fill stem designs. Female sex, age over 65, and body mass index below 25 nearly double the PFF risk. Surgical approach did not influence fracture rates., (Copyright © 2021 Elsevier Inc. All rights reserved.)

Over the next decade, orthopedic surgeons will encounter an increasing number of periprosthetic fractures of the femur after hip arthroplasty. This rise is directly related to the increasing numbers of primary and revision hip arthroplasties being performed and the aging of the population. The Vancouver classification is the most widely used classification system for periprosthetic fractures of the femur occurring after hip arthroplasty. This classification considers the location of the fracture in relation to the femoral stem, the stability of the femoral stem, and the availability of femoral bone stock for revision. Most Vancouver AG and AL fractures can be treated nonsurgically, the exceptions being fractures associated with osteolysis and clamshell fractures of the lesser trochanter. B and C type fractures usually require operative intervention. Both Vancouver B1 and C types can be treated with fracture fixation alone, as the femoral implant is stable. Vancouver types B2 and B3 require femoral revision as the implant is loose. Distinguishing between types B1 and B2 can be difficult from radiographs alone and may require computed tomography and intraoperative testing.

Intraoperative periprosthetic fractures are challenging complications that may affect implant stability and survivorship. Periprosthetic acetabular fractures are uncommon and infrequently are the focus of studies. Acetabular fractures are occasionally recognized after patients report unremitting groin pain weeks postoperatively. The widespread use of cementless acetabular cups might lead to higher number of fractures than is clinically detectable. Conversely, the incidence of intraoperative periprosthetic femoral fractures are more common and encompass a broad spectrum, ranging from a small cortical perforation to displaced fractures with an unstable prosthesis. Appropriate recognition, including mindfulness of preoperative patient and surgical risk factors, is critical to the successful management of acetabular and femoral complications. This comprehensive review article focuses on the incidence, patient and surgical risk factors, diagnosis, management, and clinical outcomes associated with intraoperative acetabular and femur fractures in primary total hip arthroplasty., (Copyright © 2021 by the American Academy of Orthopaedic Surgeons.)

Background: Periprosthetic femoral fractures around total hip arthroplasty (THA) are increasing annually, and are a major cause for revision surgery in the New Zealand Joint Registry (NZJR). The aim of this study was to determine the timing and risk factors for periprosthetic femoral fractures in THA requiring revision surgery in the NZJR., Methods: All patients with a primary THA who sustained a periprosthetic femoral fracture requiring revision THA recorded in the NZJR were reviewed to determine age, gender, body mass index, American Society of Anesthesiologists (ASA) rating and femoral stem fixation (cemented or uncemented). Revision rates were calculated per 100 component years (cy), and risk factors determined in the first 90 days, and beyond., Results: Between 1999 and 2017, there were 713 revision THA for periprosthetic femoral fractures. Early revision THA was significantly associated with ASA score and body mass index ≥40. There was no gender difference (P = 0.274). The revision rate in uncemented femoral stems (1.12/100 cy) was significantly higher (p < 0.001) than cemented stems (0.16/100 cy). After 90 days, the revision rate was significantly higher with increasing age (P < 0.001), males (P < 0.001) and higher ASA score (P < 0.001). The difference between cemented (0.07/100 cy) and uncemented (0.05/100 cy) stems did not reach statistical significance (P = 0.108)., Conclusion: The rate of revision THA for periprosthetic femoral fracture is higher in uncemented femoral stems in the first 90 days, and is significantly associated with ASA score and morbid obesity. After 90 days, the rate is lower for uncemented femoral stems, but did not reach statistical significance., (© 2021 Royal Australasian College of Surgeons.)

Introduction: In addition to abrasion-induced osteolysis and ensuing instabilities, the polyethylene (PE) abrasion of total hip arthroplasty (THA) inlays can also cause gait instability due to the decentralization of the hip joint. The current literature yields, as yet, insufficient findings whether these two factors are linked directly or indirectly to a higher risk for periprosthetic proximal femoral fractures (PPFF). The aim of our retrospective evaluation is to analyse the impact of PE abrasion on the pathology of PPFF in patients with THA., Material and Methods: The retrospective evaluation comprises all PPFF in patients with THA in the period from 01/2010 up to 12/2016. The study group (SG) included 66 cases (n = 66). The control group (CG) was comprised of patients with asymptomatic THA (n = 66), who were treated by our outpatient department including routine check-ups and X-ray examinations. We used the matched-pair methodology to scale the period of postsurgical care of the CG to the lifetime of the implant up to PPFF in the SG. We included epidemiologic data, radiological femoral head decentralization, osteolysis (Gruen classification), instabilities, acetabular cup position, and implant properties in our analysis. For the SG, we also included intra-operative signs of abrasion., Findings: The SG showed significantly higher numbers of decentralized THA as signs of inlay erosion with 73% compared to only 41% in the CG (p > 0.001). The SG showed 1 ± 0.68 mm hip joint decentralization as to 0.5 ± 0.59 mm in the CG (p = 0.004). We found significantly more cases of osteolysis in the SG (n = 25) than in the CG (n = 13) (p = 0.003). We found no notable differences in acetabular cup inclination or anteversion as well as cup size. However, differences were significant in femoral head size (SG 32 ± 2.3 mm, CG 36 ± 2.4 mm; p = 0.042) and head material. We found more widespread use of metal femoral heads in the SG than in the CG (SG 1:1, CG 1:21; p = 0.001)., Conclusion: PPFF patients showed significantly higher rates of inlay erosion, resulting in femoral head decentralization and osteolysis. The higher rate of fracture is likely caused by the increasing instability of the implant fixation due to abrasion-induced osteolysis and the associated degradation of bone quality. It is conceivable that the abrasion and decentralization of the THA can also lead to gait instability, and thus, a higher proneness to falls. Gait instability can also be aggravated by increased granulation tissue and effusion due to the inlay abrasion. Although this cannot be substantiated by the investigation. In patients with decentralization of the THA and osteolysis, a radiological follow-up should be performed, and in case of gait instability (femoral head and) inlay replacements should be considered.

Background: The increasing use of orthopedic total hip arthroplasty implants has led to a consequent rise in the incidence of associated periprosthetic fractures (PPFs). Analysis of the National Joint Registry data showed the choice of cemented hip stem influenced the risk of a PPF occurring. However, the effect of implant design in relation to the risk of PPFs has not been investigated., Methods: The main objective is to compare the biomechanics of PPFs as a failure of the Exeter V40, CPT, and DePuy C-Stem stems in a composite Sawbone model to identify whether a difference in the risk of fracture exists between them. Twenty-six Sawbones were divided into 3 groups, cemented with the Stryker Exeter, Zimmer CPT, or DePuy C-Stem and then torqued to fracture., Results: When compared with the Exeter, the CPT- and C-Stem-implanted Sawbone models would sustain PPFs at a statistically significantly lower rotation to failure (20.1° and 26.7° vs 33.6°, P < .01) and torque to failure (124 Nm and 143 Nm vs 174 Nm, P < .01) values. The energy release rate at failure for the Exeter was significantly higher than that for the CPT and C-Stem (61.2 Nm vs 21.8 Nm and 38.6 Nm, P < .01), which led to more comminution., Conclusion: The CPT- and C-Stem-implanted femurs, although fracturing earlier, fractured in a simple pattern with less comminution. The differences in stem design mean higher stress at the critical point of failure in the CPT implanted femur compared with the Exeter and DePuy, which is likely the reason behind the observed increased risk of PPFs with the CPT implant., (Copyright © 2020 Elsevier Inc. All rights reserved.)