Search

The field of metal–organic framework based mixed matrix membranes (M4s) is critically reviewed, with special emphasis on their application in CO2 capture during energy generation. After introducing the most relevant parameters affecting membrane performance, we define targets in terms of selectivity and productivity based on existing literature on process design for pre- and post-combustion CO2 capture. Subsequently, the state of the art in M4s is reviewed against these targets. Because final application of these membranes will only be possible if thin separation layers can be produced, the latest advances in the manufacture of M4 hollow fibers are discussed. Finally, the recent efforts in understanding the separation performance of these complex composite materials and future research directions are outlined. [ABSTRACT FROM AUTHOR]

Abstract: Organic–inorganic hybrid (mixed matrix) membranes can potentially extend the separation performance of traditional polymeric materials while maintaining processing convenience. Although many dense films studies have been reported, there have been few reported cases of these materials being successfully extended to asymmetric hollow fibers. In this work we report the first successful production of mixed matrix asymmetric hollow fiber membranes containing metal-organic-framework (MOF) ZIF-8 fillers. Specifically, we have incorporated ZIF-8 into a polyetherimide (Ultem® 1000) matrix and produced dual-layer asymmetric hollow fiber membranes via the dry jet-wet quench method. The outer separating layer of these composite fibers contains 13wt% (17vol%) of ZIF-8 filler. These membranes have been tested over a range of temperatures and pressures for a variety of gas pairs. An increase in separation performance for the CO2/N2 gas pairs was observed for both pure gas and mixed gas feeds. [Copyright &y& Elsevier]

Polymeric hollow fiber membranes represent a high degree of process intensification closer to scaling-up. Metal-organic framework ZIF-7 and ZIF-8 continuous membranes were synthesized on the inner surface of a 520 μm outer diameter polysulfone hollow fiber using microfluidics. This provided a constant reactant concentration along the membrane for growing homogeneous, continuous and thin layers of ZIF-7 (2.4 μm) and ZIF-8 (3.6 μm) with good adherence. The high quality of the membranes and the zeolite-like sodalite porous structure of both MOFs with pore apertures of 0.30–0.34 nm allowed operation at high temperature (150 °C) and pressure (4 bar). High separation factors in CO 2 and H 2 containing mixtures were achieved. [ABSTRACT FROM AUTHOR]