Search

Multiple-row container-grown trees require specially designed sprayers to achieve efficient spray delivery. A five-port air-assisted sprayer with both automatic and manual control modes was developed to discharge adequate spray deposition inside multiple-row trees. The sprayer resulted from integration of a high-speed laser-scanning sensor with a sophisticated nozzle flow control system, an embedded computer with a touch screen, a Doppler speed sensor, a specially-designed algorithm and an air-assisted sprayer base. It was able to detect target tree presence and measure target tree size, shape and leaf density. The sprayer then controlled the spray output of each nozzle to match tree structures. The sprayer was tested for its sprayer deposition quality inside canopies in a four-row sterling silver linden (Tilia tomentosa 'Sterling Silver' Moench) field and another six-row northern red oak (Quercus rubra L.) field. Tests were conducted with the sprayer in variable-rate application (VRA) and constant-rate application (CRA) modes. The average spray deposit on foliage of trees was 1.37±0.47 μL cm−2 from VRA and 1.29±0.42 μL cm−2 from CRA in linden, and was 2.15±0.57 μL cm−2 from VRA and 2.72±0.94 μL cm−2 from CRA in red oak, respectively. In comparison, spray coverage on foliage of trees was 19.8±3.0% from VRA and 20.9±4.3% from CRA in the linden trial, and was 27.9±3.7% from VRA and 30.5±5.4% from CRA, respectively, in the red oak trial. The newly developed air-assisted sprayer in both VRA and CRA modes would be able to discharge adequate spray deposition inside multiple-row tree plants while conserving pesticide. Index words: environmental protection, pest control, pesticide, precision sprayer, spray coverage. Species used in this study: sterling silver linden (Tilia tomentosa 'Sterling Silver' Moench), northern red oak (Quercus rubra L.).

Better management of nutrient applications during a growing season is needed to economically produce marketable container-grown ornamental shade trees. Fertilizer practices were used to test the growth of Acer rubrum ‘Red Sunset’ trees in two commercial nursery fields (each containing four plots) that were irrigated with either city or pond water. In each field, the same 16 treatments were replicated. Two slow-release granular fertilizers (18-5-12 and 12-0-42) were applied separately or together by incorporation, topdress or both to a potting mix for trees grown in 26 liter (7 gal) containers and placed above or below ground. Trees irrigated with pond water also received supplemental liquid nutrients throughout the growing season along with nitric acid to lower the pH of the potting substrate. Tree growth was assessed by stem diameter (caliper), height, canopy size, leaf color and root measurements. Significant higher caliper increases occurred in trees treated with 18-5-12 fertilizer and irrigated with either pond or city water than trees treated with the 12-0-42 fertilizer. Significantly higher percent increases in caliper also occurred for trees irrigated with pond water and top-dressed with 18-5-12 fertilizer than trees with incorporated 18-5-12 fertilizer. With the same slow-release fertilizer applications, trees irrigated with pond water and supplemental nutrients had greater percent increases of caliper, larger canopy areas and better root systems than trees irrigated with city water. The differences in tree height increase were not as great as the caliper increases. However, tree growth irrigated with pond water required additional inputs with extra nutrients and labor costs throughout the growing season.

Current label recommendations of pesticides for arthropod pests and plant diseases in the nursery and green industry are vague and frequently result in excessive pesticide use. The objective of this research was to demonstrate that modifications of spray application techniques with current spray equipment in ornamental nursery production could reduce pesticide use. The efficacy of half rates and full rates of both active ingredients and carrier was investigated in commercial nurseries with air-assisted sprayers in two tests and a state inspector survey for the control of arthropod pests and plant diseases. Sprayers were optimized with properly sized nozzles and properly calibrated operating parameters. In Test 1, treatments were conducted in approximately 0.5 ha (1.2 A) plot each in three commercial nurseries for control of arthropod pests and diseases, and in Test 2, the same treatment for aphid control was evaluated in a birch tree plot. The survey was a compilation of the pests and diseases that were diagnosed by state inspectors in over 2,800 plant varieties and species from two commercial nursery fields [total about 280 ha (692 A)] after the spray treatments in six growing seasons. Crop damage by 49 insects and 40 diseases were surveyed for different application rates. The studies revealed that insect and disease control using 50% of the label rates was as effective as full rates when quality spray coverage on targets was achieved, resulting in real cost benefits to producers, consumers and the environment.

In nursery production, knowledge of water quality and quantity is needed to improve irrigation and fertilizer application efficiency as it relates to potential for soil and groundwater contamination. Water and fertilizer use and loss as well as tree growth were investigated for Red Sunset maple (Acer rubrum 'Franksred') trees in a pot-in-pot system with two different potting media and one coal ash based medium. The coal ash based medium (Mix #1) was mainly composed of biosolids, flue gas desulfurization gypsum, and coal combustion bottom ash. The two potting media mainly composed of aged pine bark and steamed composted nursery trimmings as well as left-over potting medium from commercial nurseries, but one with low initial amendments (Mix #2) and the other one with high initial amendments (Mix #3). Trickle irrigation was applied to each tree with an automatic control system. Watering trees started when the medium moisture was below 30%, and stopped when the moisture was 42%. During two-year tests, the amount of water including irrigation and rainfall applied to each tree with Mix #1, #2 and #3 was 741, 910 and 950 L, respectively. The amount of water loss through drainage for each tree with Mix #1, #2 and #3 was 107, 147 and 112 L, respectively. Among the tree media, Medium #3 produced the highest tree growth rate, followed by the Mix #2. The coal ash based medium had great potentials to be used for nursery production.

Information on better utilizing airblast sprayers to achieve high pesticide spray application efficiency in nursery tree production is needed. Foliar spray deposition and coverage at different heights inside crabapple tree canopies were investigated for a conventional airblast sprayer operating at four different application rates ranging from 230 to 900 liters/ha [24 to 94 gallons per acre (GPA)]. Deposition on the ground at various distances from the sprayer was also measured at the 700 liters/ha (73 GPA) application rate. Foliar deposition and coverage on targets below 2.6 m (8.5 ft) inside tree canopies increased as the application rate increased, but the increase in the coverage was much lower than the deposition. For trees taller than 2.6 m (8.5 ft), the sprayer could not deliver uniform spray deposition and coverage across the tree height. The portion of trees below 2.1 m (6.9 ft) was well covered by the spray deposits with 230 liters/ha (24 GPA) application rate while higher application rates resulted in over spray application. Less than 30% of total spray volume was deposited on target trees while over 34% of the total spray volume was lost on the ground. The tree-row volume method should include foliage density and tree-row gaps to avoid excessive estimation of spray application rates for nursery tree crops.

An experimental cross-flow (CF) fan sprayer and a conventional, axial-fan (AF), orchard sprayer were used to treat multiple rows consisting of four year old, multi-stem, red maple trees, Acer rubrum L. and Turkish filbert trees, Corylus colurna L. The effects of sprayer type, fan orientation, application volume, and ground speed on canopy and ground spray deposits and canopy spray coverage across multiple target rows were evaluated. Variations in deposits and coverage across the canopies were generally smaller for the CF sprayer than the AF sprayer. The AF sprayer produced the highest overall deposits in the first row nearest the sprayer. Reducing fan speed kept more material in the tree row adjacent to the sprayer while decreasing spray volume did not affect the spray deposits in that row. Tower sprayer fan orientation did not affect canopy deposits but could be used to minimize spray drift. These results indicate that the most uniform spray distribution in a tree canopy is obtained by treating the canopy from each side. These findings also suggest growers should experiment with different spray volume and speed settings that can provide efficacious applications more efficiently.

Two types of air-assist sprayers were used to treat, from one side only, a single row of hedge-pruned, red maple (Acer rubrum L. ‘Red Sunset’) trees in a commercial Ohio nursery. A traditional orchard type sprayer and a prototype air curtain sprayer using crossflow fans and hydraulic nozzles were evaluated for differences in canopy deposits, spray coverage, and downwind ground deposits. The air curtain sprayer produced more uniform deposits vertically but not higher mean deposits than the traditional orchard type sprayer. The air curtain sprayer also produced somewhat higher ground deposits downwind of the treatment area. There were no differences in spray coverage between sprayers despite differences in the droplet spectrum produced by each sprayer. Evidence from the coverage and ground target samples indicate that slower fans on the air curtain sprayer might be needed to reduce air speed to retain more spray within the tree canopy. As operated, neither of the sprayers can be expected to produce uniform spray deposits around the nursery stock if treatments are made from one side of the row only. Canopy and ground target deposits indicate that alternate row spraying will not necessarily produce uniform deposits across two tree rows as planted at the test site.

Foliar diseases like apple scab result in significant economic losses to growers each year. Assessment in past studies involved only macroscopic disease ratings. More complete knowledge of the fate and behavior of fungicide has been needed to reduce pesticide use with less off-target contamination. Field studies were conducted in a production nursery for over 4 years. A moderately susceptible cultivar of ornamental crabapple, Malus spp. cv “Candied Apple”, was sprayed with a fungicide using two sprayer/nozzle configurations. The fungicide used in this study was Mankocide, combination of Cu(OH)2 and mancozeb that permitted electron beam analysis (EBA) identification based on the presence of Cu, MN and Zn in the molecule and formulation. EBA was conducted using a cold field emission scanning electron microscopy and energy dispersive x-ray microanalyzer. Fresh leaf samples were placed on sticky stubs after each fungicide treatment. The presence or absence of fungal conidia and fungicide residue were measured. EBA permitted direct visualization and identification of the pathogens, morphologically, and chemical characterization of fungicide present. EBA was useful to quantify disease control related to fungicide coverage, sprayer configuration and treatment efficacy. SCANNING 31: 24–27, 2009. Published 2009 by Wiley Periodicals, Inc.