Search

Accurate information on the actual thermal transmittance of walls is vital to select appropriate energy-saving measures in existing buildings to meet the commitments of the European Green Deal. To obtain accurate results using the heat flow meter (HFM) method, good thermal contact must be made between the heat flow meter plate and the wall surface. This paper aimed to assess the influence of the non-perfect thermal contact of heat flow meter plates on the accuracy of in situ measurement of the façades' U-value when a film was applied to avoid damage to the wall surface. Given the fact that to avoid harm to the wall surface, the laying of a film is a usual procedure in the installation of equipment during the building's operational stage. The findings show that deviations between measured U-values when an HFM was installed directly on the wall surface and when an HFM was installed with a PVC film were found to differ significantly from the theoretical effect of including a PVC film during the monitoring process. [ABSTRACT FROM AUTHOR]

Concerns about climate change associated with the combustion of fossil fuels urge a call for widespread reductions in household energy use. Determining means of achieving this is a key challenge faced by environmental scientists. The current research presents insights gained from a 12-month empirical trial of new serious game for energy, 'EnergyCat'; which was designed to encourage household energy reductions in the UK social housing sector. Effects of gameplay on consumption behaviours and energy awareness were explored using 82 UK social housing households (versus a no-game control). Results indicated the intervention did not lead to any substantive changes in awareness or consumption practices. However, post-intervention feedback highlighted several issues in terms of game design and usability that may explain why the game failed to change behaviour in this instance. We provide a framework of suggestions as to how the game design process could be improved in order to engage residents in future, including use of adaptive fonts for older residents, and provision of clearer instructions on gameplay objectives at the outset. In addition, researchers should ensure close collaboration is maintained with residents throughout the design process in future efforts, in order to maximise likelihood of ongoing engagement from this population. [ABSTRACT FROM AUTHOR]

Although inspections occur during construction or at handover, customers do not normally participate. This situation creates a gap between the quality perceived by both contractors and customers. An analysis of 52 552 handover defects in 2179 flats in Spain is presented which identified their nature, the building element and trade where these defects are located. These results are compared with previous studies that analysed defects detected during the construction stage and those that remain after handing over the building to the client. The research reveals that structural defects are resolved during construction due to existing quality standards. However, other aesthetic and functional defects remain and/or arise at handover. Some defects are not resolved until customers complain after they first occupy the dwelling. Many functional defects arise due to the lack of involvement of end users in the early project stages. [ABSTRACT FROM PUBLISHER]

The building industry is noted for its repeated building defects causing cost increases and time delays during construction. In Spain, despite the Ley de Ordenación de la Edificación (Building Regulation Act), which establishes a general framework to promote overall building quality, construction defects in residential buildings remain a pervasive problem. An analysis of 3647 construction defects is presented which identified the location within the building, subcontractors and building element in 68 residential building developments undertaken by two large Spanish contractors. The research reveals that the most common defects that arise during construction are related to the stability of the structure and inappropriate installation of roofs and facades. These technical faults are caused by poor workmanship rather than by the quality of the materials or products used. By comparing these results with a previous study on defects after handover, it can be concluded that while the nature of defects during construction is basically technical, at handover it is aesthetic or technical. [ABSTRACT FROM AUTHOR]

In Spain, the high levels of inexperienced workers and the long chains of subcontracting contribute to the poor quality of dwellings. Although the Ley reguladora de la subcontratación en el Sector de la Construcción (subcontracting law) has established quality measures, the number of customer complaints is still increasing. In this paper, a total of 2,351 posthandover defects derived from four Spanish builders and seven residential developments are classified according to their source and origin. The research reveals that the most common defects identified by customers at posthandover were derived from bad workmanship and were related to construction errors and omissions. Typical defects were found to include incorrect installation, appearance defects, and missing an item or task mainly related to finishing and considered to be minor. No defects were caused by poor design because they are mainly detected and resolved during construction or become apparent after some years of use. This study demonstrates the negative impact of redoing defective work during the final stages of construction and provides knowledge to define measures to improve the quality of the finished buildings, such as understanding customer expectations and preferences, training programs for workers, specialization of subcontractors, and tightening external controls prior to handover. [ABSTRACT FROM AUTHOR]

Defects produce economic and temporal deviations in construction projects. Although learning from past experiences can help reduce defects and their consequences, usually data is not easily available or is poorly structured and difficult to analyze. Several structured classification systems for defects exist, but regionally specific construction activities make the data unviable for research use. This paper presents the development and the validation of a defects' classification system for the Spanish housing sector. From the analysis of the existing defect classification systems, a first draft was developed to be discussed and improved in a series of workshops done by a panel of experts. Afterward, the final classification was validated by experts' interviews. The experts evaluated the epistemological adequacy and reusability of the proposed classification system. The results demonstrate the suitability of the classification system. In addition, the validation revealed that the classification can be implemented in tracking systems, and it can be used to analyze defects in the Spanish housing sector. Finally, the classification was used in a case study to analyze the real use, and it demonstrated the potential uses of the classification. [ABSTRACT FROM AUTHOR]

Clients' lack of involvement in defining quality requirements for dwellings built by developers leads to a perception of poor quality at the time of purchase. The research presented in this paper aims to broaden previous research on defects by analyzing the defects that remain in the post-handover stage, which usually lasts 12 months after the handover period, and identifying the factors that influence the appearance of these defects, determining whether a significant difference exists in the quality of the two main residential building types built by developers: flats and detached houses. It also analyzes and discusses the areas and elements in which the defects were detected. The data were obtained from client complaint forms completed after the handover of 95 dwellings in Spain. The data were then statistically analyzed using a t-test analysis, a Pearson's parametric correlation, and a chi-square test. The research reveals that clients detect more defects in flats than in detached houses. The lower quality of the materials used in flats and the tighter schedule to which flats are subject may cause these differences. [ABSTRACT FROM AUTHOR]

• Lessons learnt from the EU-funded EnerGAware research project are presented. • An innovative serious game was developed to promote reduced energy consumption. • The game was deployed and validated in a sample of European social housing. • Best practices for future serious game interventions are outlined. The application of gamification to encourage energy conservation behaviour in house occupants is an emerging field of research. However, empirical evidence of its effectiveness is lacking. This paper presents lessons learnt from the EU-funded EnerGAware research project, in which an innovative serious game (a game designed for purposes other than purely entertainment) was developed to promote reduced energy consumption and carbon emissions by changing social housing tenants' energy efficiency behaviour. The game was validated in a sample of European social housing using a longitudinal, two-stage experimental design, employing both pre-post and control group approaches. While some aspects of the game did not work as intended, there were nevertheless some positive impacts. The intervention increased social housing tenants' awareness and engagement in certain energy saving behaviour and provided an average electricity saving of 3.46% and an average gas saving of 7.48%. Although savings were found not to be statistically significant, an effect size was detected (0.2). Therefore, future steps should exploit all available opportunities to replicate the pilot and increase the sample size so as to gain stronger evidence of the game's impact. Preliminary results support the utility of gaming investment in the household energy efficiency field, and provide useful insights and pathways that could be incorporated into the development of future serious game interventions to foster their effectiveness. [ABSTRACT FROM AUTHOR]