Search

Background A lack of scientific information regarding the risk factors and diagnosis of peri-implant atypical femoral fracture (PI-AFF) exists. We report a case series of developed PI-AFF with a nail or plate construct wherein prior femoral fractures were already healed after osteosynthesis. This study aimed to identify the cause and risk factors of PI-AFF and to devise a preventive method based on this. Methods We identified 11 PI-AFFs displaying features of AFFs. All patients were ambulant females (mean age, 74.9 years). The mean T-score of the femur measured by DEXA (Dual Energy X-ray Absorptiometry) scan was 3.5. Osteosynthesis was performed with a plate and an intramedullary nail in six and five patients, respectively. Possible risk factors were investigated, including the used implant, the medication of bisphosphonate, the characteristics of previous fracture (AFF or non-AFF), and the co-existence of AFF on the contralateral side. Results The PI-AFFs developed at an average of 6.6 years from the time of prior fracture. All fractures were located at the screw through the plate or nail. Regarding anatomic locations, seven and four fractures were at the subtrochanteric area and diaphysis, respectively. Diaphyseal PI-AFFs occurred in plating cases, all of which were associated with excessive femoral bowing. Subtrochanteric PI-AFFs included all five patients with nail fixation, which occurred near a proximal interlocking screw. Six of the 11 patients were on bisphosphonate treatment before or at the time of fracture. The duration of bisphosphonate treatment was 6 years on average. Concerning the previous femoral fractures, seven and four patients were AFF and non-AFF, respectively. Considering the pathology on the contralateral leg, eight had suffered diaphyseal AFF. Four patients were treated nonoperatively. Seven patients needed an operation; 6 of them healed after reconstruction nailing, and one needed hip arthroplasty because of the associated displaced femoral neck fracture. Conclusions PI-AFFs may develop through the screw hole at the subtrochanteric or diaphyseal area due to femoral fragility and stress riser effect of the implant. An improved osteosynthesis strategy may be necessary to avoid PI-AFFs when fixing osteoporotic femoral fractures.

Background Previous studies have evaluated the initial stability of uncemented tibial components in revision total knee replacement (rTKR) in the presence of an Anderson Orthopaedic Research Institute (AORI) Type II tibial defect. This study sought to evaluate similar metrics in the severe Type III (AORI TIII) defects with combined uncemented stem and sleeve fixation, specifically, the effect of varying the stem’s length and tibial canal engagement upon stability and bone strain. Method Finite element models generated from the CT scans of 4 tibias with Type III defects were used to investigate the primary stability, in terms of the bone–implant composite peak micromotion (CPM) and microstrains (CPS), achieved after virtual implantations with and without stems. Results A stemless rTKR had increased metaphyseal CPM and CPS compared to all stemmed implants. Significant area of the bone supporting the stemless rTKR had CPS greater than bone yield (7000 μe). Short engaging stems (≤150 mm construct length), could not achieve reliable engagement in the diaphysis (canal fill ≤ 50%), leading to insufficient reduction of CPS (≥5000 μe). Longer engaging stems (170–220 mm construct length), were able to reliably engage the diaphysis (fill ratio ≥ 75%) resulting in CPS ≤ 5000 μe. Although, non-engaging stems resulted in increased CPM and CPS compared to engaging stems, long non-engaging stems (170–220 mm construct) appeared to provide additional stability to the rTKR compared to stemless rTKR. Conclusion The results indicate a likely correlation between uncemented stem engagement and metaphyseal CPS in Type III defects. Excessive strain within the supporting metaphyseal bone is likely to lead to rTKR migration and loosening.

Background:. Computed tomography (CT) and magnetic resonance imaging (MRI) data can be fused to identify the tumor boundaries. This enables surgeons to set close but tumor-free surgical margins and excise the tumor more precisely. This study aimed to report our experience in performing computer navigation-aided joint-preserving resection and custom-made endoprosthesis reconstruction to treat bone sarcoma in the diaphysis and metaphysis of the femur and tibia. Methods:. Between September 2008 and December 2015, 24 patients with bone sarcomas underwent surgical resection and joint-sparing reconstruction under image-guided computer navigation. The cohort comprised 16 males and eight females with a median age of 19.5 years (range: 12–48 years). The tumor location was the femoral diaphysis in three patients, distal femur in 19, and proximal tibia in two. The tumors were osteosarcoma (n = 15), chondrosarcoma (n = 3), Ewing sarcoma (n = 3), and other sarcomas (n = 3). We created a pre-operative plan for each patient using navigation system software and performed navigation-aided resection before reconstructing the defect with a custom-made prosthesis with extracortical plate fixation. Results:. Pathological examination verified that all resected specimens had appropriate surgical margins. The median distance from the tumor resection margin to the joint was 30 mm (range: 13–80 mm). The median follow-up duration was 62.5 months (range: 24–134 months). Of the 24 patients, 21 remain disease free, one is alive with disease, and two died of the disease. One patient developed local recurrence. Complications requiring additional surgical procedures occurred in six patients, including one with wound hematoma, one with delayed wound healing, one with superficial infection, one with deep infection, and two with mechanical failure of the prosthesis. The mean Musculoskeletal Tumor Society score at the final follow-up was 91% (range: 80%–100%). The 5- and 10-year implant survival rates were 91.3% and 79.9%, respectively. Conclusions:. Computer navigation-aided joint-preserving resection and custom-made endoprosthesis reconstruction with extracortical plate fixation is a reliable surgical treatment option for bone sarcoma in the diaphysis and metaphysis of the femur and tibia.

As the volume of primary total knee arthroplasties continues to rise, so will the volume of revision arthroplasties. Bone loss is commonly encountered in revision surgery and must be managed appropriately to optimize outcomes. The concept of zonal fixation highlights the importance of attaining secure fixation within each of the three major osseous zones: the epiphysis, the metaphysis, and the diaphysis. While each zone is important, the metaphysis carries particular significance. The development of new implants such as metaphyseal cones and sleeves has greatly expanded the orthopedic surgeon's armamentarium to allow for solid metaphyseal fixation in virtually every case.

BACKGROUND Quantifying pediatric phalanx fracture displacement requires understanding the normal radiographic alignment of pediatric phalanges, which has never been assessed in the coronal plane, although prior studies have assumed the articular surfaces and physes to be perpendicular to the diaphyses. This study tests the hypothesis that these relationships are not uniformly perpendicular and instead vary by digit and age. METHODS Normal hand bone age radiographs were retrospectively reviewed from 40 males and 40 females 2 to 18 years old. For each finger proximal phalanx (P1) and middle phalanx (P2), 2 raters each measured twice the angle between the diaphysis and distal articular surface (D-DA), diaphysis and physis (D-P, when physis present), and diaphysis and proximal articular surface (D-PA). Intra-rater and inter-rater reliability were calculated with intraclass correlation coefficients. 95% confidence intervals were calculated for each angle for each digit, phalanx, age group, and sex to determine which angles ~90 degrees. Variability among ages and sex was assessed with analysis of variance. RESULTS Intra-rater and inter-rater intraclass correlation coefficients were >0.90, except in P2 ∠D-DA in children under 8 years old with unossified P2 condyles. Overall, only 173 (47.8%) of 362 confidence intervals included 90 degrees. Three angles of the small finger (P1 ∠D-DA, P2 ∠D-P, P2 ∠D-PA) never ~90 degrees at any age or sex, with an average 10 degrees ulnar tilt of the small finger proximal interphalangeal joint. Of the 24 angles across digits and phalanges, 10 varied significantly with age, especially in the index and middle finger P1 where initially wedge-shaped epiphyses progressively became more symmetric with age. CONCLUSIONS The coronal radiographic angles between the phalangeal diaphyses and articular surfaces or physes differ from 90 degrees more than half the time in pediatric fingers, and nearly half the angles vary by age. These findings demonstrate that the articular surfaces and physes of the pediatric finger phalanges are not uniformly perpendicular to the diaphyses, underscoring the need to consider the variability among digits, phalanges, ages and subjects. LEVEL OF EVIDENCE Level IV.

OBJECTIVE The aim of this study was to investigate the incidence of postoperative radial nerve palsy (PORNP) after the surgical treatment of humeral shaft fractures through a posterior triceps splitting approach by a single surgeon's experience in a consecutive case series from a single trauma center. METHODS In this retrospective study, a total of 118 patients (82male, 36 female;mean age = 48 years, age range = 16 - 80 years)who underwent open reduction and plate fixation through posterior triceps splitting approach due to humeral shaft fractures at a level I trauma center were included. Level of the fractures was categorized as the proximal third, middle third, and distal third of the diaphysis, and then all the fractures were classified according to the AO/OTA classification system. The trend of incidence of PORNP was investigated. All the operations were performed by a single surgeon. The recovery time of PORNP was also recorded. RESULTS There were 13 cases of proximal third, 67 cases of middle third, and 38 cases of distal third fracture. Based on AO/OTA classification, there were 29 cases of A1-type, 23 cases of A2-type, 42 cases of A3-type, 17 cases of B2-type, 3 cases of B3-type, and 4 cases of C2-type fracture. The overall incidence of PORNP was 11% (13 cases). All the PORNP cases fully recovered within 10.3 ± 10.4 weeks (range = 1 - 44) with conservative treatment. Incidence of PORNP significantly decreased with increase in surgical experience (P = 0.009). The incidence of radial nerve palsy was not significantly related to the level of the fracture (P = 0.199). The incidence of radial nerve palsy was not significantly related with the fracture pattern according to AO/OTA classification (P = 0.659). CONCLUSION Evidence from this study has shown that the incidence of PORNP following the posterior triceps splitting approach for the treatment of humeral shaft fractures is significantly associated with the surgeon's experience. LEVEL OF EVIDENCE Level IV, Therapeutic Study.

We carried out a prospective randomized study to compare the clinical and radiological results of metacarpal diaphyseal fractures treated with retrograde intramedullary headless cannulated screws (IHCS) and plates. Fractures were fixed with IHCS in 34 patients (37 metacarpals) and locked miniplates in 35 patients (40 metacarpals). The mean age was 33 years (range 18–61) in the IHCS group and 32 years (range 17–68) in plate group. All patients were followed up for 1 year. All fractures in the IHCS group united but there was one nonunion in the plate group. At final follow-up, there was no significant difference between the groups in total active movement, visual analogue pain score, Disabilities of the Arm, Shoulder, and Hand score and grip strength, although the study was not sufficiently powered to exclude differences with certainty. IHCS is a safe and fast technique that is a good alternative to plate fixation in metacarpal diaphyseal fractures. Level of evidence: I

Objectives Measure and systematically evaluate the distribution of microhardness in the human skeleton. Methods Three fresh corpses were obtained, aged 62 (male), 45 (female), and 58 years (male). Soft tissues were removed, and all axial and unilateral appendicular bones were freshly harvested. All three skeletons were examined by X‐ray and computed tomography (CT) to exclude skeletal pathology. Only bones from donors with no known skeletal pathology were included in the study. Axial and unilateral appendicular skeleton bones from each of the three donors were obtained, except for ear ossicles, hyoid bone, tailbone, and 14 phalanges of the foot, for which samples were difficult to obtain. Precision bone specimens with a thickness of 3 mm, which were cut with a Buehler IsoMet 11‐1280‐250 low‐speed diamond saw (Buehler, USA), were obtained from all important anatomic sites in a direction perpendicular to the mechanical axis of each bone. Micro‐indentation (the Vickers hardness test) was performed on the surface of each specimen using a microhardness tester with a diamond indenter. Hardness value (HV) was computed for each indentation. Each bone specimen was divided into several regions of interest. Indentations were carefully made and computed. Then we analyzed the data to identify hardness distribution rules at different anatomic sites. Results In total, 5360 indentations were made in 1072 regions of interest in each donor. Hardness of the axial and appendicular bones were all inhomogeneous depending on the anatomic sites, but the distribution of microhardness followed certain rules. The mean hardness value ranged from 24.46 HV (HV = hardness value, kgf/mm2) for the sacrum to 53.20 HV for the shaft of the tibia. The diaphysis was harder than the metaphysis, and the proximal and distal epiphysis had lower values (8.85%– 40.39%) than the diaphysis. Among the long bone diaphyses, the tibia cortical bone (51.20 HV) was the hardest, harder than the humerus (47.25 HV), the ulna (43.26 HV), the radius (42.54 HV), and the femur (47.53 HV). However, in some anatomic sites such as the lumbar vertebra (cortical bone 32.86 HV, cancellous bone 31.25 HV), the cortical shells were sometimes not harder than the internal cancellous bones. The lumbar vertebra (32.86 HV) was harder than the cervical vertebra (28.51 HV) and the thoracic vertebra (29.01 HV). Conclusions The distribution of microhardness in the human skeleton follows certain rules. These distribution rules could be used to predict the mechanical properties of bone and progress in this field could provide data for the basis of a new three‐dimensional printing technique, which may lead to new perspectives for custom‐made implants., The data of bone microhardness, which represents bone material mechanical properties, is inhomogeneous among anatomical regions, but the distribution of microhardness follows certain rules. Hardness values could be used to predict the mechanical properties of bone; if the region has a higher hardness value it may provide better support and anchorage force for the physiological load or implants. Progress in this field could provide data for the basis of a new three‐dimensional printing technique and may lead to new perspectives for custom‐made implants.

Background This study aimed to identify the characteristic radiological signs for the diagnosis of Langerhans cell histiocytosis (LCH) of the bone. Methods We retrospectively studied 82 cases of LCH with bone lesions confirmed by pathology. Clinical and radiological features of the patients were analyzed. Results A total of 64 and 18 patients had single and multiple bone lesions, respectively. With regard to LCH with single bone lesions, 37.5% (24/64) of lesions were located in the skull and presented as bone destruction with or without soft tissue mass. The correct diagnosis rate of these lesions was 60.0% (9/15) in children and adolescents, but was only 22.2% (2/9) in adults. A total of 26.5% (17/64) of the solitary lesions were found in the spine. Of these, 88.2% (15/17) were located in the vertebral body and appeared to have different degrees of collapse, and 66.7% (10/15) of these lesions were correctly diagnosed. Of the unifocal lesions, 21.8% (14/64) were located in other flat and irregular bones and manifested as osteolysis. Only 21.4% (3/14) of these cases were correctly diagnosed. In total, 14.1% (9/64) of the isolated bone LCH lesions were located in the long bones. Of these, 77.8% (7/9) were located in the diaphysis and presented as central bone destruction with or without fusiform periosteal reaction and extensive peripheral edema, of which 42.9% (3/7) were correctly diagnosed before surgery or biopsy. With regard to LCH with multiple bony destructive lesions, 71.4% (10/14) of cases in children and adolescents were correctly diagnosed; however, all four cases among adults were misdiagnosed. Conclusion In all age groups, isolated diaphyseal destruction of the long bone with fusiform periosteal reaction and extensive peripheral edema, vertebra plana of the spine, and bevelled edge of skull defects accompanied by soft tissue masses strongly suggest LCH diagnosis. Moreover, the multiple bone osteolytic destruction in children and adolescents strongly suggests LCH diagnosis. Familiarity with these typical radiological signs of LCH is necessary to decrease misdiagnoses.

Bone adapts to unaccustomed, high-impact loading but loses mechanosensitivity quickly. Short periods of military training (≤12 weeks) increase the density and size of the tibia in women. The effect of longer periods of military training, where the incidence of stress fracture is high, on tibial macrostructure and microarchitecture in women is unknown. This observational study recruited 51 women (age 19 to 30 years) at the start of 44 weeks of British Army Officer training. Tibial volumetric bone mineral density (vBMD), geometry, and microarchitecture were measured by high-resolution peripheral quantitative computed tomography (HRpQCT). Scans of the right tibial metaphysis (4% site) and diaphysis (30% site) were performed at weeks 1, 14, 28, and 44. Measures of whole-body areal bone mineral density (aBMD) were obtained using dual-energy X-ray absorptiometry (DXA). Blood samples were taken at weeks 1, 28, and 44, and were analyzed for markers of bone formation and resorption. Trabecular vBMD increased from week 1 to 44 at the 4% site (3.0%, p < .001). Cortical vBMD decreased from week 1 to 14 at the 30% site (-0.3%, p < .001). Trabecular area decreased at the 4% site (-0.4%); trabecular bone volume fraction (3.5%), cortical area (4.8%), and cortical thickness (4.0%) increased at the 4% site; and, cortical perimeter increased at the 30% site (0.5%) from week 1 to 44 (p ≤ .005). Trabecular number (3.5%) and thickness (2.1%) increased, and trabecular separation decreased (-3.1%), at the 4% site from week 1 to 44 (p < .001). Training increased failure load at the 30% site from week 1 to 44 (2.5%, p < .001). Training had no effect on aBMD or markers of bone formation or resorption. Tibial macrostructure and microarchitecture continued to adapt across 44 weeks of military training in young women. Temporal decreases in cortical density support a role of intracortical remodeling in the pathogenesis of stress fracture. © 2021 Crown copyright. Journal of Bone and Mineral Research © 2021 American Society for Bone and Mineral Research (ASBMR). This article is published with the permission of the Controller of HMSO and the Queen's Printer for Scotland.

We report the peculiar case of a parosteal osteosarcoma arising beneath the periosteum in a 12-year-old boy. He complained of difficulty in left knee flexion. Plain radiography showed a uniformly dense mineralized mass in the bone cortex and parosteal ossified nodules at the metaphysis and diaphysis of the left distal femur. Periosteal reaction was not evident. Uniquely, plain radiography had a smooth outline and revealed gradually thickening mass toward the center. Histologically, the tumor showed a proliferation of spindle-shaped cells with parallel-oriented dense bone trabeculae and hyaline cartilaginous tissue disclosing mild atypia. The periosteum was inverted along the polypoid mass, but there was no periosteum at the top. Immunohistochemically, the spindle cells, including those at the top of the polypoid mass, and cartilaginous cells were positive for MDM2 and CDK4. MDM2 gene amplification was detected in these cells by fluorescence in situ hybridization. Despite the peculiar feature of plain radiography, the lesion was diagnosed as parosteal osteosarcoma. This case report presents a case of parosteal osteosarcoma arising beneath the periosteum, although it is postulated to arise in the outer layer of the periosteum. The unique radiographic findings in this case suggest an association of parosteal osteosarcoma with vigorous bone growth before closure of the growth plate.

Midshaft clavicle fractures represent about 4% of all fractures in the emergency department. Non-operative treatment of displaced midshaft clavicle fractures (DMCF) can result in a relatively high non-union rate. Several operative techniques, including intramedullary fixation (IMF) using elastic stable intramedullary nailing (ESIN), have therefore been established. IMF through the medial approach is less suitable for fractures of the lateral diaphysis. IMF of DMCF of the lateral diaphysis through a lateral approach can be an alternative approach for these fractures. The aim of this study is to describe the technique of IMF from the lateral side and to present the functional outcome and complications. A retrospective cohort study was performed. All patients with a traumatic DMCF treated with IMF using ESIN through a lateral approach between 2014 and 2019 were included. Endpoints were the functional outcome (QuickDASH, Subjective Shoulder Value (SSV)), pain (numeric rating scale (NRS)), daily impairment (activities of daily living (ADL)), complications and implant removal. Forty out of 43 patients were available for follow-up. Mean follow-up was 37 months. Mean age was 24 years (range 13–70). The median QuickDASH score was 0 (IQR 0.0–0.0) and the median SSV was 100 (95–100). The median ADL score was 1 (1–4) and the median NRS was 0 (0–0). No non-union occurred. Implant related irritation occurred in 11 patients (27.5%). Implants were removed in a total of 38 (95%) patients; in 10 cases due to irritation, in 28 cases routinely or on patient’s request. IMF of DMCF of the lateral diaphysis through a lateral approach leads to excellent functional results and seems to be a suitable option for internal fixation. However, as with IMF from the medial side, it is not without complications and implant-related irritation.

DNA analysis of Second World War skeletal remains is challenging because of the limited yield of DNA that is usually recovered. Recent forensic research has focused on determining which skeletal elements are superior in their preservation of DNA, and little focus has been placed on measuring intra-bone variability. Metatarsals and metacarpals outperformed all the other bones in DNA yield when analyzing all representative skeletal elements of three Second World War victims, and intra-bone variability was not studied. Soft-tissue remnants were found to contribute to higher DNA yield in trabecular bone tissue. Because metatarsals and metacarpals are composed of trabecular epiphyses and a dense diaphysis, the goal of this study was to explore intra-bone variability in DNA content by measuring nuclear DNA quantity and quality using the PowerQuant System (Promega). A total of 193 bones from a single Second World War mass grave were examined. From each bone, DNA was extracted from the compact diaphysis and from both spongy epiphyses combined. This study confirms higher DNA quantity in epiphyses than diaphyses among all the bones analyzed, and more DNA was obtained from metacarpal epiphyses than from metatarsal epiphyses. Therefore, whenever the possibility for sampling both metacarpals and metatarsals from skeletal remains exists, collecting metacarpals is recommended. In cases in which the hands are missing, metatarsals should be sampled. In any case, epiphyses are a richer source of DNA than diaphyses.

OBJECTIVE This study investigates bilateral asymmetry in the humerus of modern human populations with differing activity patterns to assess the relative plasticity of different bone regions in response to environmental influences, particularly the biomechanical demands of handedness. METHODS External breadths, cross-sectional properties, and centroid sizes were used to quantify directional and absolute asymmetry of humeral diaphyseal, distal periarticular, and articular regions in six populations with differing subsistence strategies (total n = 244). Geometric section properties were measured using computed tomography at six locations along the distal humerus, while centroid sizes of the distal articular and periarticular regions, as well as eight segments of the diaphysis, were extracted from external landmark data. Bilateral asymmetries were compared between populations and sexes. Each property was also tested for correlation with bilateral asymmetry at 40% of bone length, which has been shown to correlate with handedness. RESULTS Asymmetry is highest in the diaphysis, but significant through all distal bone regions. Asymmetry increases in the region of the deltoid tuberosity, and progressively declines distally through the shaft and distal periarticular region. Articular asymmetry is higher than periarticular asymmetry, approaching levels seen just proximal to the olecranon fossa, and is weakly but significantly correlated with diaphyseal asymmetry. Hunter-gatherers from Indian Knoll have significantly higher levels of asymmetry than other groups and are more sexually dimorphic, particularly in cross-sectional properties of the diaphysis. CONCLUSIONS Humeral dimensions throughout the diaphysis, including regions currently used in taxonomic assignments of fossil hominins, likely respond to in vivo use, including population and sex-specific behaviors.

DNA testing of human bones is performed for identification when there is no remaining soft tissue, which often means the samples are old or environmentally compromised. Under these circumstances, it can be difficult to obtain a STR DNA profile. It is important to recover the highest quantity and quality of DNA for STR typing. This study compared the DNA recovery and STR profiles from five anatomical locations in five femora and five tibiae. These locations include the proximal metaphysis, proximal diaphysis, mid-diaphysis, distal diaphysis, and distal metaphysis. Twenty-five femur samples and 25 tibia samples were analyzed using the Qiagen Investigator Quantiplex Pro RGQ Kit for quantitating the extracted DNA and the Qiagen Investigator 24plex QS Kit for STR DNA typing. The highest DNA recovery of the five regions tested in both the femur and the tibia was from the midshaft diaphysis. The femur samples resulted in a significantly higher DNA recovery than the tibia samples as analyzed using a Kruskal-Wallis test (P = 0.002103). The midshaft diaphysis and distal diaphysis yielded the most complete STR DNA profiles in the femora, while the distal and proximal diaphysis yielded the most complete STR DNA profiles in the tibiae. There was no correlation between the amount of DNA recovered and the completeness of the STR DNA profile produced with low template extracts in this study.

OBJECTIVE Disrupted blood supply has been proposed as an underlying cause for delayed union in tibial shaft fractures (OTA/AO 42). Although tibial blood supply has been qualitatively evaluated, quantitative studies are lacking. The purpose of this project was to quantify the relative contribution of the endosteal supply to the tibial diaphysis. METHODS The superficial femoral artery of 8 fresh frozen cadaveric matched pair lower extremities was cannulated. The nutrient artery was ligated at its proximal branch point in experimental limbs. Pregadolinium and postgadolinium enhanced magnetic resonance imaging was performed with high resolution fat-suppressed ultrashort echo time magnetic resonance imaging sequences. Perfusion was assessed in 3 zones (outer, central, and inner cortex) for the proximal, middle, and distal diaphysis, respectively, using custom software to quantify and compare signal intensity between experimental and control limbs. RESULTS On average, the endosteal system supplied 91.4% (±3.9%) of the cortex and was the predominant blood supply for the inner, central, and outer thirds. The dominance of the endosteal contribution was most pronounced in the inner two-third of the cortex, with more than 97% loss of perfusion. Disruption of the nutrient artery also resulted in 76.3% (±11.2%) loss of perfusion of the outer one-third of the cortex. CONCLUSION This quantitative study revealed a predominance of endosteal blood supply to all areas (inner, middle, and outer thirds) of the tibial diaphyseal cortex. To prevent delayed bone healing, surgeons should take care to preserve the remaining periosteal vascular network in fracture patterns in which the nutrient artery has likely been disrupted.

Metastatic disease is the most common pathologic cause of bone destruction, and the upper extremity is frequently involved. This location presents many surgical challenges, but there have been several recent implant and technique-related advances that have improved outcomes. Patients can be treated nonsurgically, with radiation or with surgery, depending on patient characteristics, signs/symptoms, primary diagnosis, location, and extent of bone destruction. Most locations in the upper extremity besides the humerus can be treated nonsurgically or with radiation. This is also true of the humerus, but when surgery is indicated, plate fixation is acceptable when adequate proximal and distal cortical bone is present for screw purchase. Intramedullary nailing is used frequently in metastatic humeral disease as well, especially in the diaphysis. When extensive destruction or disease progression precludes internal fixation, a resection with endoprosthetic reconstruction can be considered. Oncologic hemiarthroplasty endoprosthetics still have a role, but reverse shoulder designs are beginning to show improved function. Humeral prosthesis designs are continuing to improve, and are becoming more modular, with custom implants still playing a role in certain challenging scenarios.

Cortical bone and its microstructure are crucial for bone strength, especially at the long bone diaphysis. However, it is still not well‐defined how imaging procedures can be used as predictive tools for mechanical bone properties. This study evaluated the capability of several high‐resolution imaging techniques to capture cortical bone morphology and assessed the correlation with the bone's mechanical properties. The microstructural properties (cortical thickness [Ct.Th], porosity [Ct.Po], area [Ct.Ar]) of 11 female tibial diaphysis (40–90 years) were evaluated by dual‐energy X‐ray absorptiometry (DXA), high‐resolution peripheral‐quantitative‐computed‐tomography (HR‐pQCT), micro‐CT (μCT) and histomorphometry. Stiffness and maximal torque to failure were determined by mechanical testing. T‐Scores determined by DXA ranged from 0.6 to −5.6 and a lower T‐Score was associated with a decrease in Ct.Th (p ≤ 0.001) while the Ct.Po (p ≤ 0.007) increased, and this relationship was independent of the imaging method. With decreasing T‐Score, histology showed an increase in Ct.Po from the endosteal to the periosteal side (p = 0.001) and an exponential increase in the ratio of osteons at rest to those after remodelling. However, compared to histomorphometry, HR‐pQCT and μCT underestimated Ct.Po and Ct.Th. A lower T‐Score was also associated with significantly reduced stiffness (p = 0.031) and maximal torque (p = 0.006). Improving the accuracy of Ct.Po and Ct.Th did not improve prediction of the mechanical properties, which was most closely related to geometry (Ct.Ar). The ex‐vivo evaluation of mechanical properties correlated with all imaging modalities, with Ct.Th and Ct.Po highly correlated with the T‐Score of the tibial diaphysis. Cortical microstructural changes were underestimated with the lower resolution of HR‐pQCT and μCT compared to the histological ‘gold standard’. The increased accuracy did not result in an improved prediction for local bone strength in this study, which however might be related to the limited number of specimens and thus needs to be evaluated in a larger collective., Cortical bone loss has been identified as a main source of osteoporotic and age‐related bone substance loss and fracture risk. In this study, we evaluated the cortical microstructural properties of tibias with different imaging modalities (dual‐energy X‐ray absorptiometry [DXA], high‐resolution peripheral‐quantitative‐computed‐tomography [HR‐pQCT], micro‐CT [μCT] and histomorphometry) and directly compared them to their biomechanical properties. Notably, cortical parameters and especially Cortical Porosity (Co.Po) were underestimated with high‐resolution imaging CT compared to the ‘gold standard’ histology which in turn also allowed evaluation of osteonal remodeling activity. However, the improved analysis of cortical thickness and porosity did not result in an improvement in bone strength prediction. Cortical area still translated better into local bone strength indicating size and shape in a single parameter due to the simplicity of the geometry at this skeletal site.

Reduction in cortical bone mineral density at diaphysis of metacarpal bones of the hand, evaluated by dual X-ray radiogrammetry, has a bad prognostic value in patients with early arthritis. Nevertheless, this technique is hardly accessible in clinical practice. By contrast, evaluation of cortical bone mineral density at that location has not been previously assessed by conventional dual X-ray absorptiometry. The aim of this study is to evaluate the reproducibility of bone mineral density measurements at diaphysis of metacarpal bones using conventional dual X-ray densitometry in a population of healthy volunteers and patients with early arthritis. Nondominant hand dual X-ray densitometry was performed at three consecutive times with complete hand replacement in 27 subjects: 10 early arthritis and 17 healthy volunteers. Three different evaluators analyzed the 3 measurements of second to fourth metacarpal bones. To assess the reproducibility and accuracy of the measurements, intra- and interobserver agreement degrees, intra- and interclass correlation coefficients, smallest difference detectable assessment, and Bland Altman graphs were calculated. The coefficients of variation obtained for the different metacarpal evaluations were 2.25%, 2.91%, 2.85%, and 2.07% for metacarpal-2, metacarpal-3, metacarpal-4, and mean metacarpal-second to fourth, respectively, with a smallest difference detectable of 0.028, 0.034, 0.028, and 0.03 g/cm2, respectively. The mean intra- and interobserver correlation coefficients between of metacarpal second to fourth were 0.990 (95% confidence interval [CI]: 0.982–0.995) and 0.995 (95% CI: 0.991–0.997), respectively. As expected, women had lower bone mineral density at metacarpal bones, especially after menopause. The results obtained in this study show an excellent reproducibility of bone mineral density measurements at diaphysis of metacarpal bones of the hand, measured by conventional dual X-ray densitometry, in a mixed population of healthy subjects and patients with early arthritis. This is of great interest for longitudinal studies in patients with early arthritis.

The aim of this study was to evaluate the neuromuscular structures at risk during modified anterior minimally invasive plating osteosynthesis technique (Belangero–Livani) for humeral shaft fractures. Eight fresh-frozen human specimens ranging from 38 to 82 years old were used. Specimens were positioned supine with the shoulder in 70° abduction and the forearm in full supination. Anterior minimally invasive plating osteosynthesis technique according to Belangero–Livani technique was performed in each specimen. Under radioscopic control, the plate was introduced in retrograde fashion through the subbrachialis path. Anatomical structures were inspected and different anatomical parameters were measured after dissection at the end of the surgical procedures. Measurements were performed using a high digital caliper. Statistical analysis was performed using the Pearson’s correlation coefficient test. A p value of

Bone resorption caused by stress shielding and insufficient bone-implant contact continues to be problematic for orthopedic endoprostheses that utilize osseointegration (OI) for skeletal fixation. Morphologic analyses have helped combat this issue by defining anatomic parameters to optimize endoprosthesis loading by maximizing bone-implant contact. These studies have not typically included diaphyseal medullary morphology, as this region is not pertinent to total joint replacement. To the contrary, percutaneous OI endoprostheses for prosthetic limb attachment are placed in the diaphysis of the long bone. This study examined the cortical and medullary morphology of 116 fresh-frozen human cadaveric tibia using computed tomography. Anatomic landmarks were selected and custom MATLAB scripts were used to analyze the cross-sectional cortical and medullary morphology normalized to biomechanical length (BML). BML measured the distance between the tibial plateau and the tibial plafond. Properties such as cortical thickness, medullary diameter, and circularity of the medullary canal were quantified. We tested the influence of sex and laterality on morphology, and examined variations along the length of the bone. Results showed that while both sex and laterality impacted the location of anatomic landmarks, only sex influenced cross-sectional morphology. Overall, morphology significantly affected shape along the length of the bone for all examined properties except medullary circularity. This analysis found that distal to 35% BML, the canal is conducive to a circular implant, with medullary diameter ranging from 13 to 32 mm between 20 and 80% BML. A large size range is necessary for sufficient implant contact in order to accommodate residual limb length after amputation.

Severe infant osteogenesis imperfecta requires osteosynthesis. Intramedullary tibia's osteosynthesis is a technical challenge given the deformity and the medullar canal's narrowness. We describe an extramedullary technique: 'In-Out-In' K-wires sliding. We performed an anteromedial diaphysis approach. The periosteum was released while preserving its posterior vascular attachments. To obtain a straight leg, we did numerous osteotomies as many times as necessary. K-wires ('In') were introduced into the proximal epiphysis, and the medial malleolus ('Out') bordered the cortical and ('In') reach their opposite metaphysis. K-wires were cut, curved and impacted at their respective epiphysis ends to allow a telescopic effect. All tibial fragments are strapped on K-wires, and the periosteum was sutured over it. Our inclusion criteria were children with osteogenesis imperfecta operated before 6 years old whose verticalization was impossible. Seven patients (11 tibias) are included (2006-2016) with a mean surgery's age of 3.3 ± 1.1 years old. All patients received intravenous bisphosphonates preoperatively. The follow-up was 6.1 ± 2.7 years. All patients could stand up with supports, and the flexion deformity correction was 46.7 ± 14.2°. Osteosynthesis was changed in nine tibias for the arrest of telescoping with flexion deformity recurrence and meantime first session-revision was 3.8 ± 1.7 years. At revision, K-wires overlap had decreased by 55 ± 23%. Including all surgeries, three distal K-wires migrations were observed, and the number of surgical procedures was 2.5/tibia. No growth arrest and other complications reported. 'In-Out-In' K-wires sliding can be considered in select cases where the absence of a medullary canal prevents the insertion of intramedullary rod or as a salvage or alternative procedure mode of fixation. It can perform in severe infant osteogenesis imperfecta under 6 years old with few complications and good survival time.

Background To reproduce anatomical reduction and appropriate implant placement/choices during osteosynthesis for elbow fractures, we developed a 3D preoperative planning system. To assess the utility of 3D digital preoperative planning for the osteosynthesis of distal humerus fractures, we evaluated the reproducibility of implant reduction shapes and placements in patients with distal humerus fractures. Methods Twelve patients with distal humerus fractures who underwent osteosynthesis using 3D preoperative planning were evaluated. Reduction shapes were evaluated by the angle between the diaphysis axis and a line connecting the vertices of the medial epicondyle and the lateral epicondyle (epicondyle angle), and the angle between the diaphysis axis and the articular surface (joint angle) in the coronal plane, and the distance between the anterior diaphysis and the anterior articular surface in the sagittal plane (anterior distance) based on 3D images of the distal humerus. In addition, the implant positions were evaluated by the positions of the proximal and posterior edge of the plate, and the angle of the plate to the epicondyle line. The reproducibility was evaluated by intra-class correlation coefficients of the parameters between pre- and postoperative images. Results The intra-class correlation coefficients were 0.545, 0.802, and 0.372 for the epicondyle angle, joint angle, and anterior distance, respectively. The differences in the measurements between the preoperative plan and postoperative reduction were 2.1 ± 2.1 degrees, 2.3 ± 1.8 degrees, and 2.8 ± 2.0 mm, for the epicondyle angle, joint angle, and anterior distance, respectively. The intra-class correlation coefficients were 0.983, 0.661, and 0.653 for the proximal and posterior plate positions, and the angle to the epicondyle, respectively. The differences in the measurements between the preoperative plan and postoperative reduction were 3.3 ± 2.1 mm, 2.7 ± 1.7 mm and 9.7 ± 9.8 degrees, for the plate positions of proximal and posterior edge, and the angle of the plate to the epicondyle line, respectively. There were significant correlations for the epicondyle angle, joint angle, and plate positions. Conclusions 3D preoperative planning for osteosynthesis of distal humerus fracture was reproducible for the reduction shape of the coronal view and the plate positions. It may be helpful for acquiring practical images of osteosynthesis in distal humerus fractures. Level of evidence Level III, a case–control study.

Background Percutaneous osseointegrated (OI) docking of prosthetic limbs returns loading directly to the residual bone of individuals with amputations. Lower limb diaphyseal biomechanics have not been studied during the wide range of daily activities performed by individuals with lower extremity amputations; therefore, little is known about the loads experienced at the bone-endoprosthetic interface of a percutaneous OI device. Research question Does residual limb length and/or gender influence loading magnitudes in the diaphysis of the femur or tibia during daily activities? Methods This observational study used motion capture data from 40 non-amputee volunteers performing nine activities ranging from low to high demand, to virtually simulate residual limbs of amputees. To simulate diaphyseal bone loading in individuals with lower limb amputations, virtual joints were defined during post-processing at 25, 50, and 75 % of residual limb length of both the femur and the tibia, representing six clinically relevant residual limb lengths for OI device placement. Peak axial distractive and compressive forces, torsional moments, and bending moments were calculated for each activity. Comparisons were made between genders and between different levels of the simulated residual limb. Results For simulated above and below knee amputations, short residual limbs showed the highest average bending, torsion, and axial distractive loads, while axial compressive loads were highest for long residual limbs. Absolute maxima for all subjects showed this same trend, except in below knee torsion, where 75 % residual tibia length showed the maximum. The highest demand activities yielding peaks in all directions were cutting with right leg planted, jump, run, and fall. Significance Overall, individuals with shorter residual limbs experienced higher diaphyseal forces. This should be taken into consideration during surgical implantation of percutaneous OI devices where residual limb length can potentially be shortened, and during rehabilitation of percutaneous OI patients.

The early diagnosis of osteoporosis through bone quality assessment is a major public health challenge. Research in axial transmission using ultrasonic guided waves has shown the method to be sensitive to the geometrical and mechanical properties of the cortical layer in long bones. However, because of the asymmetric nature of cortical bone, the introduction of a more elaborate numerical model than the analytical plate and cylinder models, as well as its inversion, continues to be challenging. The aim of this article is, therefore, to implement a bone-like geometry using semianalytical finite-element (SAFE) modeling to perform the inverse characterization of ex vivo radii at low frequencies (< 60 kHz). Five cadaveric radiuses were taken from donors aged between 53 and 88 and tested using a typical axial transmission configuration at the middle of the diaphysis. The dispersion curves of the propagating modes were measured experimentally and then systematically compared with the solutions obtained with the SAFE method. For each sample, four parameters were estimated using a parameter identification procedure: 1) the bulk density; 2) the thickness; 3) the outer diameter; and 4) a shape factor (SF). The results showed a moderate agreement between the predicted bulk density and the average voxel value calculated from X-ray computed tomography images. Furthermore, a good agreement was observed between the geometrical parameters (thickness, outer diameter, and SF) and the reference images.

Purpose Repeat intervention for pediatric forearm fractures after closed manipulation is as high as 46% with flexed elbow (FE) long-arm casts. Casting with the elbow extended (EE) has been advocated as an alternative technique. We documented outcomes of patients treated with closed manipulation and casting with EE long-arm casts for displaced, diaphyseal both-bone forearm fractures. Methods We retrospectively reviewed charts for patients who had sedated manipulations and casting for closed, diaphyseal forearm fractures. Open fractures, immediate surgical intervention, metabolic bone disease, recurrent fractures, and Monteggia injuries were excluded. Closed manipulations were performed by orthopaedic residents assisted by cast technicians, with sedation provided by emergency department physicians. Radiographic angulation and displacement of the radius and ulna on immediate postreduction radiographs and all follow-up radiographs were recorded. Patients requiring repeat intervention were compared with those who did not by using the Mann-Whitney U and Fisher exact tests. Results Of 86 patients (7.2±2.8 y) available for analysis, 82 (95.3%) completed treatment after a single-sedated manipulation and placement of an EE long-arm cast. There were no malunions or nonunions. The average follow-up was 50 days. Four (4.7%) patients required repeat interventions (2 had surgery, 1 had a repeat sedated manipulation, and 1 had a nonsedated manipulation). There were no statistically significant differences in age, sex, laterality, fracture position in the diaphysis, or immediate postreduction angulation of the radius or ulna. A literature review showed average repeat intervention rates of 14.9% (range, 0% to 45.9%) for FE casts and 3.3% (range, 0% to 15%) for EE casts. Conclusions There was a low rate of repeat interventions (4.7%) in patients with EE casts compared with historical rates for FE casts. Improving the quality of health care involves identifying and implementing practices that provide the best outcomes at the lowest costs. The use of EE long-arm casts following closed manipulation of pediatric forearm fractures may decrease the rate of repeat manipulation or surgery compared with conventional FE casts. Level of evidence Level IV-case series.

IntroductionFractures of the diaphysis of the clavicle are common; however, treatment guidelines for this condition are lacking. Surgery is associated with a lower risk of non-union and better functional outcomes but a higher risk of complications. Open reduction and internal fixation with plates and screws are the most commonly performed techniques, but they are associated with paraesthesia in the areas of incisions, extensive surgical exposure and high rates of implant removal. Minimally invasive techniques for treating these fractures have a lower rate of complications. The aim of this study is to evaluate which surgical treatment option (minimally invasive osteosynthesis or open reduction and internal fixation) has better prognosis in terms of complications and reoperations.Methods and analysisThe study proposed is a multicentric, pragmatic, randomised, open-label, superiority clinical trial between minimally invasive osteosynthesis and open reduction and internal fixation for surgical treatment of patients with displaced fractures of the clavicle shaft. In the proposed study, 190 individuals with displaced midshaft clavicle fractures, who require surgery as treatment, will be randomised. The assessment will occur at 2, 6, 12, 24 and 48 weeks, respectively. The primary outcome of the study will be the number of complications and reoperations. For sample size calculation, a moderate effective size between the techniques was considered in a two-tailed test, with 95% confidence and 90% power. Complications include cases of infection, hypertrophic scarring, non-union, refracture, implant failure, hypoesthesia, skin irritation and shoulder pain. Reoperations are defined as the number of surgeries for pseudoarthrosis, implant failure, infection and elective removal of the implant.Ethics and disseminationStudy approved by the institutional ethics committee (number 34249120.9.0000.5505—V.3). The results will be disseminated by publications in peer-reviewed journals and presentations in medical meetings.Trial registration numberRBR-3czz68)/UTN U1111-1257-8953.

Femoral neck fractures are a massive personal and health programme burden. Methods to study femoral neck strength, across its combined trabecular and cortical components are therefore essential. Rodent ovariectomy-induced osteoporosis models are commonly coupled with ex vivo 3-/4-point bending methods to measure changes in femoral cortical diaphysis. The loading direction used to assess these properties are often non-physiologic and, moreover, these ovariectomy models are linked to marked weight gain that can influence the biomechanical properties. Herein, we explore whether more physiological axial ex vivo loading protocols applied to femoral neck samples of ovariectomised (OVX) rodents provide anatomically-relevant models for the assessment of strength. We examine the use of mouse and rat femurs, loaded in constrained and unconstrained configuration, respectively, and explore whether weight-correction increases their utility. Accordingly, the mid-shaft of the proximal half of femurs from OVX and sham-operated (Sham) mice was methacrylate-anchored and the head loaded parallel to the diaphysis (constrained). Alternatively, femurs from OVX and Sham rats were isolated intact and axially-loaded through hip and knee joint articular surfaces (unconstrained). Yield displacement, stiffness, maximum load and resilience were measured and fracture pattern classified; effects of body weight-correction via a linear regression method or simple division were assessed. Our data reveal significant deficiencies in biomechanical properties in OVX mouse femurs loaded in constrained configuration, only after weight-correction by linear regression. In addition, evaluation of rat femur biomechanics in unconstrained loading demonstrated greater variation and that weight-correction by simple division improved scope to reveal significant OVX impact. We conclude that greater femoral neck fracture susceptibility can indeed be measured in OVX rodents as long as multiple biomechanical parameters are reported, care is taken in choosing the method for assessing load-bearing strength and weight-correction applied. These studies advance the establishment of more relevant rodent models for the study of femoral neck fracture.

» Fractures of the proximal fifth metatarsal (PFMT) are one of the most common foot injuries, accounting for 61% to 78% of all foot fractures, but full consensus on their classification, diagnosis, and treatment has not yet been reached. » The most commonly accepted classification is that of Lawrence and Botte, who divided the location of PFMT fractures into 3 zones with respect to their healing potential. » Avulsion fractures of the tuberosity of the base (zone 1) generally heal well, and nonoperative treatment is commonly recommended. » Internal fixation may be considered for displaced fractures that extend into the fourth-fifth intermetatarsal joint (zone 2) as well as for nondisplaced fractures in athletes or high-demand patients, with the aims of reducing the healing time and expediting return to sport or work. » Stress fractures of the proximal diaphysis (zone 3) are preferably treated operatively, particularly in the presence of signs of delayed union. With nonoperative treatment, supportive measures such as ultrasonography or external/extracorporeal shockwave therapy have been demonstrated to have limited potential for the enhancement of fracture-healing.

Background The implantation of screws is a standard procedure in musculoskeletal surgery. Heat can induce thermal osteonecrosis, damage the bone and lead to secondary problems like implant loosening and secondary fractures. The aim of this study was to investigate whether screw insertion generates temperatures that can cause osteonecrosis. Methods We measured the temperature of twenty human femur diaphysis in a total of 120 measurements, while screws of different material (stainless steel and titanium alloy) and different design (locking and cortex screw) were inserted in three different screwing modes (manual vs. machine screwing at full and reduced rotational speed) with 6 thermocouples (3 cis and 3 trans cortex). Each was placed at a depth of 2 mm with a distance of 1.5 mm from the outer surface of the screw. Results The screw design (cortical > locking), the site of measurement (trans-cortex > cis-cortex) and the type of screw insertion (hand insertion > machine insertion) have an influence on the increase in bone temperature. The screw material (steel > titanium), the site of measurement (trans-cortex > cis-cortex) and the type of screw insertion (machine insertion > hand insertion) have an influence on the time needed to cool below critical temperature values. The combination of the two parameters (maximum temperature and cooling time), which is particularly critical for osteonecrosis, is found only at the trans-cortex. Conclusion Inserting a screw hast the potential to increase the temperature of the surrounding bone tissue above critical values and therefore can induce osteonecrosis. The trans-cortex is the critical area for the development of temperatures above the osteonecrosis threshold, making effective cooling by irrigation difficult. It would be conceivable to cool the borehole with cold saline solution before inserting the screw or to cool the screw in cold saline solution. If possible, insertion by hand should be considered.

Background External snapping hip syndrome (ESH) is postulated to be one of the causes of greater trochanteric pain syndrome, which also includes greater trochanteric bursitis and tendinopathy or tears of the hip abductor mechanism. However, it was not yet described what kind of bony morphology can cause the snapping and whether symptomatic and asymptomatic individuals have different imaging features. Purpose It was the purpose of this study to look for predisposing morphological factors for ESH and to differentiate between painful and asymptomatic snapping. Methods A consecutive cohort with ESH and available magnetic resonance imaging (MRI) between 2014 and 2019 was identified. The control group consisted of patients that underwent corrective osteotomies around the knee for mechanical axis correction and never complained of hip symptoms nor had undergone previous hip procedures. The following parameters were blindly assessed for determination of risk factors for ESH: CCD (corpus collum diaphysis) angle; femoral and global offset; femoral antetorsion; functional femoral antetorsion; translation of the greater trochanter (GT); posterior tilt of the GT; pelvic width/anterior pelvic length; intertrochanteric width. Hip and pelvic offset indexes were calculated as ratios of femoral/global offset and intertrochanteric/pelvic width, respectively. For the comparison of symptomatic and asymptomatic snapping, the following soft-tissue signs were investigated: presence of trochanteric bursitis or gluteal tendinopathy; presence of surface bony irregularities on trochanter major and ITB (Iliotibial band) thickness. Results A total of 31 hips with ESH were identified. The control group (n = 29) consisted of patients matched on both age (± 1) and gender. Multiple regression analysis determined an increased hip offset index to be independent predictor of ESH (r = + 0.283, p = 0.025), most likely due to the higher femoral offset in the ESH group (p = 0.031). Pearson correlation analysis could not identify any significant secondary factors. No differences were found between painful and asymptomatic snapping on MRI. Conclusions A high hip offset index was found as an independent predictor for external snapping hip in our cohort, mainly due to increased femoral offset. No imaging soft-tissue related differences could be outlined between symptomatic and asymptomatic external snapping. Level of evidence III This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00590.

Purpose Atypical ulnar fracture (AUF) related to prolonged bisphosphonate therapy is a rare complication. We propose diagnostic criteria of AUFs and present a treatment algorithm. Methods Twelve AUFs in 10 patients were studied. The diagnosis of AUF was based on the case definition of atypical femoral fracture (AFF). We investigated clinical and radiographic characteristics of AUFs according to major and minor features of AFFs, and modified the case definition of an AFF to fit the characteristics of AUFs. All AUFs were treated surgically. The radiographic union of fractures was investigated, and delayed fracture healing was defined as a delay of 6 months or more. Results The average point at which AUFs occurred was at a point 35.1% along the proximal diaphysis of the total ulnar length. All major features of AFFs were identified in the 12 AUFs. Among the minor features, generalized cortical thickening was observed in 6 AUFs, prodromal symptoms in 2 AUFs, bilateral involvement in 2 patients, and delayed fracture healing in 10 AUFs (5 delayed union, 5 nonunion). Initially, 11 of 12 AUFs were treated with plating, and 1 was treated with intramedullary nailing . Two nonunions were revised with sclerotic bone resections , bone grafts , and plate fixation . Finally, union was achieved in 9 AUFs. Conclusions The case definition of AFFs can be used for the diagnosis of AUFs, although some modifications must be included in the case definition. Plating is useful in managing AUFs, although sclerotic bone resections and bone grafts may be required. Atypical ulnar fractures occurred in patients who took bisphosphonates longer than AFFs or those whose bisphosphonates were discontinued a few years earlier. Therefore, physicians should be aware of AUFs in those patients and, if necessary, perform a screening test to look for atypical fractures in other bones. Type of study/level of evidence Diagnostic V.

Glucocorticoids are currently used to improve muscle strength and prolong ambulation in boys with DMD although the effect on bone health is still unclear. The aim of this study was to compare bone strength in healthy children and boys with DMD and investigate the interaction between diminished muscle function, loss of ambulation and high dose oral steroids, over a two year time frame. Fifty children were studied, 14 healthy boys (HB), 13 boys with DMD who remained ambulant (DMD-RA) and 23 boys with DMD who lost ambulation (DMD-LA). All boys with DMD had taken oral glucocorticoids. Peripheral quantitative computed tomography was used to measure bone geometry, density, strength and muscle mass of the non-dominant tibia and radius. Measurements were made at baseline, 12 and 24 months at the distal metaphysis and mid diaphysis sites. Differences between the three groups were evaluated using ANOVA and a repeated measures model. There were no significant differences in age between the groups: mean age was 9.4, 8.7 and 8.8 years for HB, DMD-RA and DMD-LA, respectively. There was no significant difference in steroid exposure between the DMD groups. However, boys who lost ambulation had significantly lower muscle function at baseline (North Star Ambulatory Assessment DMD-RA 23.6 vs. DMD-LA 18.8; p

Background Nonunion following treatment of supracondylar femur fractures with lateral locked plates (LLP) has been reported to be as high as 21 %. Implant related and surgeon-controlled variables have been postulated to contribute to nonunion by modulating fracture-fixation construct stiffness. The purpose of this study is to evaluate the effect of surgeon-controlled factors on stiffness when treating supracondylar femur fractures with LLPs: Does plate length affect construct stiffness given the same plate material, fracture working length and type of screws? Does screw type (bicortical locking versus bicortical nonlocking or unicortical locking) and number of screws affect construct stiffness given the same material, fracture working length, and plate length? Does fracture working length affect construct stiffness given the same plate material, length and type of screws? Does plate material (titanium versus stainless steel) affect construct stiffness given the same fracture working length, plate length, type and number of screws? Methods Mechanical study of simulated supracondylar femur fractures treated with LLPs of varying lengths, screw types, fractureworking lenghts, and plate/screw material. Overall construct stiffness was evaluated using an Instron hydraulic testing apparatus. Results Stiffness was 15 % higher comparing 13-hole to the 5-hole plates (995 N/mm849N vs. /mm, p = 0.003). The use of bicortical nonlocking screws decreased overall construct stiffness by 18 % compared to bicortical locking screws (808 N/mm vs. 995 N/mm, p = 0.0001). The type of screw (unicortical locking vs. bicortical locking) and the number of screws in the diaphysis (3 vs. 10) did not appear to significantly influence construct stiffness (p = 0.76, p = 0.24). Similarly, fracture working length (5.4 cm vs. 9.4 cm, p = 0.24), and implant type (titanium vs. stainless steel, p = 0.12) did also not appear to effect stiffness. Discussion Using shorter plates and using bicortical nonlocking screws (vs. bicortical locking screws) reduced overall construct stiffness. Using more screws, using unicortical locking screws, increasing fracture working length and varying plate material (titanium vs. stainless steel) does not appear to significantly alter construct stiffness. Surgeons can adjust plate length and screw types to affect overall fracture-fixation construct stiffness; however, the optimal stiffness to promote healing remains unknown.

BackgroundThe purpose of this study was to review retrospectively the primary total hip arthroplasties operated upon with the cementless Wagner Self-Locking stem in patients with type C femoral bone.MethodsTwenty-eight total hip arthroplasties were performed in 25 patients aged ≥ 60 years using a cementless Wagner Self-Locking femoral component between 2006 and 2011. According to Dorr’s criteria, all 28 femora were classified as type C bone. All patients were treated with THA using a cementless Wagner cone prosthesis. Clinical and radiologic evaluations were performed on all patients.ResultsMean follow-up period was 125 ± 10.5 months (range 96 to 156 months). Average Harris hip score pre-operatively was 46 ± 9 (range 39 to 62) and at the last follow-up was 90 ± 9 (range 83 to 98). The stem to canal fill is calculated as percentages on the operative side at three distinct levels: just below the lesser trochanter, at midstem, and 1 cm above the tip of the component on anteroposterior radiograph. The mean proximal stem-to-canal fill percentages were 97% ± 2.1%, 95% ± 3.5%, and 88% ± 2.6%, respectively (anteroposterior view) and 92% ± 2.2%, 86% ± 1.9%, and 83% ± 2.5%, respectively (lateral view). Radiographic evaluation demonstrated good osteointegration of the implants in the follow-up.ConclusionsBased on the long-straight cylindrical tapered stem design, the cementless Wagner SL stem can achieve reliable stability by close apposition of the stem and wide stovepipe femoral canal from metaphysis to diaphysis in type C bone.

The purpose of this study was to develop a technique allowing a faster return to previous activities after surgical treatment of short transverse and oblique fractures of the diaphysis of the fifth metacarpal. It consisted of an anterograde and retrograde centromedullary double pinning connected. Our series included 40 patients of average age 25 years including 2 women. In 20 cases (group I), an anterograde centromedullary pinning with a 1.6- or 2-mm pin was performed followed by a 6-week orthosis and then 2-week self-education. In 20 cases (group II), an anterograde and retrograde centromedullary double pinning was performed using 2 1.5-mm pins connected by a connector (MetaHUS®, Arex™). A first pin was introduced into the canal antegrade, then the second retrograde. The 2 externalized pins were connected, and self-rehabilitation was encouraged. Mean tourniquet time was 14.75 min (group I) and 15.8 min (group II), respectively. At the last follow-up, the average pain was 0.35/10 and 0.2/10, the Quick DASH 0.68/100 and 0.57/100, the strength of the hand 94.65% and 94.35%, the active flexion MCP 98.5% and 99%, respectively. MCP active extension was 98.5% and 98.75%; the sick leave was 8.4 and 6.3 weeks. All fractures healed without recovery with 3 complications: 2 infections on pins, in each group, 1 CRPS1 (group I). Our results seem to show that the technique of anterograde and retrograde centromedullary double pinning connected in the treatment of short transverse and oblique fractures of the diaphysis of the fifth metacarpal gives results at least as good as the reference technique with a non-negligible socioeconomic advantage, a less time off work.

Background Various options exist for implant fixation in revision total knee arthroplasty. One of it is direct cementless metaphyseal sleeve fixation with stems, which has shown excellent short-term and midterm results. Stemless fixation of sleeves is another fixation option for the treatment of specific bone defects; however, so far no data in larger series exist. The objective of this study was, therefore, to analyze the midterm (3-6.5 years) results of stemless sleeve fixation in a larger revision total knee arthroplasty series. Methods In this prospective study, 85 patients with 109 stemless sleeves have been assessed with a mean follow-up of 58.2 (36-78) months. An exclusion criterion was uncontained type II and type III defects. Analysis included clinical and radiographic assessment. Results The results showed a survival rate of sleeves in 96% of the tibia (27/28) and 100% of the femur (81/81). This results in an overall survival rate of sleeves of 99% (108/109). So far, 10 patients (11.8%) underwent rerevision during the follow-up period. The main reason for failure was infection (4/85; 4.7%). Range of motion, Oxford Knee Score, Knee Society Score, and Functional Score improved significantly. Mechanical leg alignment was within the 3° corridor in all patients. Conclusions In cases with type I and contained type II defects, sleeves without stems are a promising option, with a survival rate of sleeves of 99% after 5 years. Also, the clinical improvement and reconstruction of leg alignment showed excellent results. In uncontained defects and type III defects, however, we do recommend using stems for additional fixation in the diaphysis. Although the midterm results are very promising, long-term data are needed.

The use of bisphosphonates for osteoporosis patients has markedly decreased the incidence of femoral neck or trochanteric fractures. However, anti-osteoporosis drugs have been reported to increase the incidence of atypical femoral fractures, which involve stress fractures in the subtrochanteric region or the proximal diaphysis. In this study, the morphological characteristics of the cortical bone in human femoral diaphysis samples were analyzed from individuals who lived before bisphosphonate drugs were available in Japan. A total of 90 right femoral bones were arbitrarily selected (46 males and 44 females) from modern Japanese skeletal specimens. Full-length images of these femurs were acquired using a computed tomography scanner. An image processing method for binarization was used to calculate the threshold values of individual bones for determining their contours. The range between the lower end of the lesser trochanter and the adductor tubercle of each femur was divided at regular intervals to obtain 10 planes. The mean value of cortical bone thickness, periosteal border length, and the cortical cross-sectional area was evaluated for all planes. Moreover, the ratio of the area of the cortical bone to the total area of cross-section at the mid-diaphysis was calculated. A comparison between males and females demonstrated that most females had lower cortical bone area ratios at the mid-diaphysis. The femoral outer shape did not differ markedly according to age or sex; however, substantial individual differences were observed in the shape of the inner surface of the cortical bone. The cortical bone thickness and the cross-sectional area decreased with age in the femoral diaphysis; furthermore, in females, the decrease was higher for the former than for the latter. This may be due to a compensatory increase in the circumference of the femoral diaphysis. In addition, in about half of the subjects there was a discrepancy between the region with maximal value of the cortical bone thickness and that of the total cross-sectional area. Biological responses to mechanical stresses to the femoral diaphysis are thought not to be uniform. Bisphosphonates inhibit bone resorption and may promote non-physiological bone remodeling. Thus, a nonhomogeneous decrease in cortical thickness may be related to the fracture occurrence in the femoral diaphysis in some cases. Thus, long-term administration of bisphosphonates in patients with morphological vulnerability in the femoral cortical bones may increase the occurrence of atypical femoral fractures., Journal of Anatomy, 235(5), pp.892-902; 2019

Non-randomized open-label clinical trial of oral alendronate after teriparatide therapy in people with spinal cord injury (SCI) and low bone mineral density (BMD). To determine if alendronate would prevent bone loss after discontinuation of teriparatide. Outpatient research clinic at Northwestern University Feinberg School of Medicine. Seventeen participants with chronic SCI who recently completed 12–24 months of teriparatide treatment received oral alendronate 70 mg once weekly for 12 months. Participants were evaluated at baseline, 6 months and 12 months. Bone was assessed by: DXA at the spine and hip, CT at the distal femur/proximal tibia, serum collected for bone markers, and bone strength determined by finite element (FE) analysis of the proximal tibia. Areal BMD showed no significant change from baseline at the total hip or femoral neck, where mean change (SD) was 1.3% (4.7) and 0.54% (5.0), respectively. However, areal BMD increased significantly at the spine by 2.5% (4.6). CT demonstrated significant increases in bone mineral content at the femoral epiphysis, metaphysis, and diaphysis, 15% (18), 7.7% (12), and 3.0% (3.5), respectively. Measurements at the tibia illustrated improvements and reductions, but no changes to FE-predicted strength were observed. Biomarkers illustrated inhibition of bone formation and resorption, with P1NP and CTX decreasing by 52% (82) and 62% (74), respectively. Twelve months of alendronate after discontinuation of teriparatide in people with SCI can prevent bone loss and may increase bone mass and preserve bone strength at the spine, hip, and some sites of the knee.

Stress fractures are common overuse injuries caused by repetitive bone loading. These fractures are of particular concern for military recruits and athletes resulting in attrition in up to 60% of recruits that sustain a fracture. Army and Navy recruits supplemented with daily calcium and vitamin D (Ca + D) demonstrated improved bone strength and reduced stress fractures. The aim of the current study was to evaluate whether Ca + D supplementation improves measures of bone health in recruits undergoing United States Marine Corps initial military training (IMT), and whether the effect of supplementation on indices of bone health varied by season. One-hundred ninety-seven Marine recruits (n = 107 males, n = 90 females, mean age = 18.9 ± 1.6 y) were randomized to receive either Ca + D fortified snack bars (2000 mg Ca and 1000 IU vitamin D per day) or placebo divided into twice daily doses during 12 weeks of IMT. Anthropometrics, fasted blood samples, and peripheral quantitative computed tomography (pQCT) scans of the tibial metaphysis and diaphysis were collected upon entrance to- and post-training (12 weeks later). Half of the volunteers entered training in July and the other half started in February. Time-by-group interactions were observed for vitamin D status (25OHD) and the bone turnover markers, BAP, TRAP and OCN. 25OHD increased and BAP, TRAP and OCN all decreased in the Ca + D group (p .05). Training increased distal tibia volumetric BMD (+1.9 ± 2.8%), BMC (+2.0 ± 3.1%), and bone strength index (BSI; +4.0 ± 4.0%) and diaphyseal BMC (+1.0 ± 2.2%) and polar stress strain index (SSIp; +0.7 ± 2.1%) independent of Ca + D supplementation (p .05 for all). When analyzed by season, change in BSI was greater in the Ca + D group as compared to placebo in the summer iteration only (T*G; p .05). No other effects of supplementation on bone tissue were observed. When categorized by tertile of percent change in BSI, recruits demonstrating the greatest changes in BSI and 25OHD entered training with the lowest levels of 25OHD (p .05). Over all, these results suggest that Ca + D supplementation reduced some markers of bone formation and resorption and the decline in 25OHD over training in volunteers that started training in the summer was prevented by supplementation. Baseline 25OHD and trajectory may impact bone responses to IMT, but little effect of Ca + D supplementation was observed at the investigated doses.

Since stress fractures are common among adolescent athletes, it is important to identify bone assessment tools that accurately identify risk. We investigated the discriminative ability of two imaging technologies to classify at-risk athletes. Findings suggested that peripheral quantitative computed tomography (pQCT) has the ability to distinguish differences in bone structure in injured vs. uninjured limbs. Given the high stress fracture (SFX) prevalence among adolescent girls, an understanding of the most informative assessment tools to identify SFX risks are required. We investigated the discriminative ability of pQCT vs. dual-energy X-ray absorptiometry (DXA) to classify athletes with or without SFX. Twelve adolescent athletes diagnosed with a lower-extremity SFX were compared with 12 matched controls. DXA measured areal bone mineral density (aBMD) and content of the total body, and lumbar spine. Bilateral tibiae were assessed with pQCT. At the metaphysis (3%), total density (ToD), trabecular density (TrD), trabecular area (TrA), and estimated bone strength in compression (BSIc), and at the diaphysis (38% and 66%), total bone area (ToA), cortical density (CoD), cortical area (CoA), estimated bone strength in torsion (SSIp), and peri- and endocortical and muscle area (MuA) were obtained. Cortical bone mass/density around the center of mass and marrow density (estimate of adiposity) were calculated using ImageJ software. General estimated equations adjusting for multiple comparisons (Holm-Bonferroni method) were used to compare means between (1) injured limb of the case athletes vs. uninjured limb of the control athletes and (2) uninjured limb of the case athletes vs. uninjured limbs of the controls and injured vs. uninjured limb of case athletes with a SFX. aBMD and content showed no significant differences between cases and controls. When comparing the injured vs. uninjured leg in the case athletes by pQCT at the 3% tibia, unadjusted TrD, total density, and BSIc were significantly lower (p

Objective: The introduction of a stemless prosthesis in shoulder arthroplasty represents a novel design whereby the proximal humerus is restored anatomically, while leaving the diaphysis of the humerus untouched. The aim of this study was to present the mid-term results of total evolutive shoulder system (TESS; Biomet®), a stemless shoulder prosthesis. Methods: The study included 38 consecutive patients (18 men and 20 women; mean age: 66 years; range: 55-81 years) treated with shoulder arthroplasty between 2009 and 2011 with TESS for primary glenohumeral arthritis. Total shoulder arthroplasty (TSA) was performed in 28 cases (74%), hemi-shoulder arthroplasty (HSA) in 10 (26%). Constant score, active range of motion, patient satisfaction rate, and radiological assessment were analyzed. Mean time of follow-up was 37 months. Results: Constant score improved from 21.8 points (28.6 adjusted for age) preoperatively to 74.1 points (86.6 adjusted for age) postoperatively. Active range of motion increased significantly from the pre- to postoperative status. Eighty-nine percent were very satisfied or satisfied with shoulder replacement surgery. One cemented glenoid was revised due to aseptic loosening. None of the components were found to be loose at the final follow-up. No signs of stress shielding were seen. Conclusions: This study shows promising results of this implant concept in the short- to mid-term. These results are comparable with the results achieved with long-established arthroplasty designs. Level of Evidence: Level IV, Therapeutic Study. Keywords: Stemless shoulder arthroplasty, Glenohumeral osteoarthritis, T.E.S.S., Primary shoulder osteoarthritis, Total shoulder arthroplasty

Introduction The incidence of periprosthetic fractures after total knee arthroplasty (TKA) is rising due to an increasing number of TKAs performed annually and the growing elderly population. Like periprosthetic fractures of the distal femur, periprosthetic tibia fractures are primarily treated with operative fixation; however, there is limited scientific literature that has reported outcomes of periprosthetic tibia fractures treated with modern plating techniques. To our knowledge, this is the largest series of non-intraoperative periprosthetic tibia fractures treated with open reduction internal fixation (ORIF) ever reported. Methods Retrospective chart review of 4557 operatively treated tibia fractures with ORIF over a 16-year period at two Level 1 Trauma Centers. Results 38 patients with an average follow-up of 15.3 months (range 3–24) were identified. 11 (28.9%) fractures were in the proximal tibia (four with extension into the plateau (Felix 1A) and seven adjacent to the tibial stem (Felix 2A)), six (15.8%) in the midshaft/diaphysis (Felix 3A), and 21 (55.3%) in the distal 1/3rd (metaphysis, Felix 3A). 76.3% (29/38) of fractures united by 6 months following the index procedure, leaving 9 nonunions. The overall re-operation rate was 31.6% (12/38). There were no significant differences in rates of union (p = 1.00), reoperation (p = 0.66), superficial infection (p = 0.66), or deep infection (p = 0.31) in patients treated with single versus dual plating. Conclusion Periprosthetic tibia fractures are difficult to treat and have a high risk of nonunion and reoperation even with modern plating techniques. Most patients can be treated to union with operative fixation and do not require revision arthroplasty, if the components are stable initially. We recommend dual plating for fractures in the proximal third, and either single plating or nailing for fractures in the middle and distal thirds depending on bone quality, implant positioning, and fracture morphology.

The proximal humerus is a common, yet understudied site for osteoporotic fracture. The current study explored the impact of prolonged physical activity on proximal humerus bone health by comparing bone properties between the throwing and nonthrowing arms within professional baseball players. The proximal humerus in throwing arms had 28.1% (95% CI, 17.8 to 38.3%) greater bone mass compared to nonthrowing arms, as assessed using dual-energy x-ray absorptiometry. At the level of the surgical neck, computed tomography revealed 12.0% (95% CI, 8.2 to 15.8%) greater total cross-sectional area and 31.0% (95% CI, 17.8 to 44.2%) greater cortical thickness within throwing arms, which contributed to 56.8% (95% CI, 44.9 to 68.8%) greater polar moment of inertia (i.e., estimated ability to resist torsional forces) compared to nonthrowing arms. Within the humeral head and greater tubercle regions, throwing arms had 3.1% (95% CI, 1.1 to 5.1%) more trabecular bone, as assessed using high-resolution magnetic resonance imaging. Three-dimensional mapping of voxel- and vertex-wise differences between arms using statistical parametric mapping techniques revealed throwing arms had adaptation within much of the proximal diaphysis, especially the posterolateral cortex. The pattern of proximal diaphysis adaptation approximated the pattern of strain energy distribution within the proximal humerus during a fastball pitch derived from a musculoskeletal and finite element model in a representative player. These data demonstrate the adaptive ability of the proximal humerus to physical activity-related mechanical loads. It remains to be established how they translate to exercise prescription to improve bone health within the proximal humerus, however, they provide unique insight into the relationship between prolonged loading and skeletal adaptation at a clinically relevant osteoporotic site.

Rapid declines in bone mineral density (BMD) at the knee after spinal cord injury (SCI) are associated with an increased risk of fracture. Evaluation of bone quality using the trabecular bone score (TBS) may provide a complimentary measure to BMD assessment to examine bone health and fracture risk after SCI. The purpose of this study was to assess bone mineral density (BMD) and trabecular bone score (TBS) at the knee in individuals with and without SCI. Nine individuals with complete SCI (mean time since SCI 2.9 ± 3.8 yr) and 9 non-SCI controls received dual-energy X-ray absorptiometry scans of the right knee using the lumbar spine protocol. BMD and TBS were quantified at epiphyseal, metaphyseal, diaphyseal, and total bone regions of the distal femur and proximal tibia. Individuals with SCI illustrated significantly lower total BMD at the distal femur (23%; p = 0.029) and proximal tibia (19%; p = 0.02) when compared with non-SCI controls. Despite these marked differences in BMD from both locations, significant differences in total TBS were observed at the distal femur only (6%; p = 0.023). The observed differences in total BMD and TBS could be attributed to reductions in epiphyseal rather than metaphyseal or diaphysis measurements. The relationship between TBS and duration of SCI was well explained by a logarithmic trend at the distal femoral epiphysis (r2 = 0.54, p = 0.025). The logarithmic trend would predict that after 3 yr of SCI, TBS would be approximately 6% lower than the non-SCI controls. Further evaluation is needed to determine if TBS measures at the knee provide important information about bone quality that is not captured by traditional BMD.

Objective To investigate the bone hardness of different anatomical regions of the human radius and its impact on the pullout strength of screws. Methods Fresh radius bones were obtained from three donated cadavers. They were divided into three parts: proximal metaphysis, shaft, and distal metaphysis. The proximal metaphysis contains the head, neck, and radial tuberosity. The distal metaphysis includes the palmaris radius and the styloid process. The shaft of the radius was divided into nine segments of equal length. The bone hardness of three radiuses, one from each cadaver, was measured by Vickers microindentation hardness tests, and the screw pullout strength was examined in the other three radiuses using a materials testing machine. The trend between radius hardness and pullout strength was analyzed by using an analysis of variance randomized block design. Pearson correlation analysis was performed to evaluate the linear correlation between the bone hardness and the pullout strength of the human radius. Results The mean hardness ranged from 33.30 HV (the head) to 43.82 HV (the diaphysis). The hardest part of the radius was the shaft, with a value of 42.54 ± 5.59 HV. The proximal metaphysis had a hardness value of 34.15 ± 6.48 HV, and the distal metaphysis hardness value was 35.24 ± 5.17 HV. The shaft was 23.5% harder than the proximal metaphysis and 20% harder than the distal metaphysis. The microhardness test demonstrated that the bone hardness value of the diaphysis was significantly higher than those of both the proximal and distal metaphysis of the radius (both P < 0.05). The mean pullout strength values ranged from 552 N (the distal metaphysis) to 2296 N (the diaphysis). The greatest pullout strength of the radius was observed for the shaft, with a pullout strength of 1727.96 ± 111.44 N. The pullout strength of the proximal metaphysis was 726.33 ± 236.39 N, and the pullout strength of the distal metaphysis was 590.67 ± 36.30 N. The pullout strength of the shaft was 138% greater than that of the proximal metaphysis and 190% greater than that of the distal metaphysis. The pullout strength was also higher in the diaphysis than at both ends of the radius (both P < 0.05). A positive correlation was found between bone hardness and pullout strength (R = 0.927, P < 0.001). Conclusions Bone hardness and screw pullout strength are higher in the diaphysis of the radius than at either end. The pullout strength is positively related to bone hardness in the human radius.

We aimed to investigate the incidence of proximal fibula fractures in patients with tibial plateau fractures and to identify risk factors for such combined injuries. From January 2011 to December 2015, 354 patients with tibial plateau fractures who had been admitted to a level 1 trauma center were retrospectively evaluated by an orthopaedic trauma surgeon and two skeletal radiologists. Anteroposterior plain radiography and computed tomography (CT) were used to characterize the injuries, and the incidence of associated proximal fibula fractures was determined. The tibial plateau fractures were classified according to the Schatzker's and three-column classifications. Associated proximal fibula fractures were simultaneously classified with a new fibula fracture classification system. Finally, we determined whether there were statistically significant associations between the presence of a proximal fibula fracture and different types of tibial plateau fractures, as well as sex and age. Proximal fibula fractures were detected in 192 (54.24%) patients using plain radiography and in 215 (60.73%) patients using CT. Logistic regression analysis indicated an increasing trend in the incidence of fibula fractures detected by the CT-based three-column classification system as follows: “age × sex > three columns > age > single posterior column > lateral column + posterior column > medial column + posterior column > medial column + lateral column > single lateral column > single medial column.” Proximal fibula fracture associated with tibial plateau fracture is a common phenomenon worthy of attention. In women, age increases the likelihood of complex tibial plateau fractures, particularly those involving the posterolateral articular surface and diaphysis, as well as the likelihood of developing proximal fibula fractures. This s Level IV diagnostic study.

Background Peri-implant fractures occur in association with an implant used to treat a previous injury and that is still attached to the bone. Peri-implant fractures are considered to be relatively "new" fractures and they lack any classification system that is accepted in practice. Generally, the fracture classification systems currently used in our clinical practice were not developed or validated using rigorous scientific evaluation methods. Aim To provide data for a proposed classification of peri-implant femoral fractures. Methods This is an international and multicentre study (12 centres) based on a cohort of consecutive peri-implant fractures with the criterion being: a fracture in any segment of the femur in association with previously-used osteosynthesis material, whether a nail, plate or screws. A proposed system for the classification was tested, based on a topographical classification using alphanumeric coding, following a similar nomenclature to that explained in the "Vancouver-Classification-for-Total-Hip-Arthroplasty-Periprosthetic-Fractures", and classified according to whether the implant is a nail, a screw or a plate, and the location of the fracture in relation to the original implant and the affected femoral segment. The study coordinator performed the first classification exercise, which was discussed subsequently for the study coordinator group to reach a consensus. A descriptive analysis of the fractures was produced. The proportion of peri-implant femoral fractures was estimated, and 95% confidence interval (95%CI) was calculated. Results Between January 2013 and December 2016, data on a total of 143 peri-implant femoral fractures were collected. Only 5 (3.5%) fractures had to be discussed to reach a consensus. The most common peri-implant femoral fractures were located at the diaphyseal segment (#32) and associated with nails or plates: 51%, 73/143, 95%CI:43-59%; at the proximal segment (#31): 39%, 56/143, 95%CI:32-47%; and at the distal femoral segment (#33): 10%, 14/143, 95%CI:6-16%. The highest proportion of peri-implant femoral fractures corresponded to #31-AN (trochanteric and neck area) and #32-CNP (diaphysis fractures distant from the implant, often distal and spiral). Conclusion The proposed classification for peri-implant femoral fractures appears to be useful and easy to accomplish. Future studies will be necessary to validate it and demonstrate the effectiveness of its application in clinical practice.

Awareness of risk factors associated with impending fracture and its radiologic appearance allows early diagnosis, supports prophylactic surgical treatment, and prevents the multiple complications of a pathologic fracture. Because the femur is the most common long bone affected by metastatic bone lesions, we address this clinically relevant site in this review. The key to early detection of risky bone lesions is familiarity with the possible clinical presentation, biomechanical effects of the anatomical site (femoral head and neck, intertrochanteric zone, proximal diaphysis), and the lesion types (lytic, blastic, or mixed). Awareness of the possible treatment strategies depending on the characteristics just listed allows high-quality targeted reporting.

Automatic segmentation of ulna and radius (UR) in forearm radiographs is a necessary step for single X-ray absorptiometry bone mineral density measurement and diagnosis of osteoporosis. Accurate and robust segmentation of UR is difficult, given the variation in forearms between patients and the nonuniformity intensity in forearm radiographs. In this work, we proposed a practical automatic UR segmentation method through the dynamic programming (DP) algorithm to trace UR contours. Four seed points along four UR diaphysis edges are automatically located in the preprocessed radiographs. Then, the minimum cost paths in a cost map are traced from the seed points through the DP algorithm as UR edges and are merged as the UR contours. The proposed method is quantitatively evaluated using 37 forearm radiographs with manual segmentation results, including 22 normal-exposure and 15 low-exposure radiographs. The average Dice similarity coefficient of our method reached 0.945. The average mean absolute distance between the contours extracted by our method and a radiologist is only 5.04 pixels. The segmentation performance of our method between the normal- and low-exposure radiographs was insignificantly different. Our method was also validated on 105 forearm radiographs acquired under various imaging conditions from several hospitals. The results demonstrated that our method was fairly robust for forearm radiographs of various qualities.