Search

Background/Aims: Acute pancreatitis (AP) runs a moderately severe and severe course in 20%-30% of cases. The purpose of the present study was to determine the effect of low molecular weight heparin (LMWH) for the prevention of pancreatic necrosis (PN) in moderately severe and severe AP (MSAP). Materials and Methods: A total of 100 patients with MSAP were randomized to receive either standard care (SC) or SC plus LMWH. LMWH was administered at 1 mg/kg via subcutaneous injection twice a day between days 1 and 7. The revised Atlanta criteria were used in the diagnosis of MSAP. Patients with a Harmless AP Score of ≥1 and a Balthazar computed tomography (CT) score of D and E were included in the study. Results: The mean age±SD of the patients (46 male and 54 female) was 52±19 years (range, 17-100). There were 50 patients in each group. On admission, clinical and laboratory parameters and Balthazar CT scores were similar between the groups. Initially, PN was present in one patient in the LMWH group and two in the SC group. Over the course, PN developed in 3 (6.1%) patients in the LMWH group and 11 (22.9%) in the SC group (p

Introduction The purposes of this study were to evaluate and compare the periodontal, dentoalveolar, and skeletal effects of tooth-borne and tooth-bone-borne expansion devices using cone-beam computed tomography. Methods Twenty-five patients requiring maxillary expansion were randomly allocated into 2 groups. A tooth-borne hyrax appliance was used in the first group, consisting of 13 patients (8 girls, 5 boys; mean age, 14.3 ± 2.3 years), and a tooth-bone-borne hybrid hyrax appliance was used in the second group of 12 patients (6 girls, 6 boys; mean age, 13.8 ± 2.2 years). Cone-beam computed tomography records were taken before and 3 months after expansion, and periodontal, dentoalveolar, and skeletal measurements were made on the cone-beam computed tomography images with a software program. The 2 independent-samples t test and the Mann-Whitney U test were used to evaluate treatment changes for both groups. Paired-samples t test and Wilcoxon test were used to compare the measurements at 2 time points for variables. Results Significant skeletal changes and increases in interdental distances were observed in both groups. However, the distances between the first and second premolars increased more with the hyrax appliance (7.5 ± 4.2 and 7.9 ± 3.3 mm, respectively) than with the hybrid hyrax (3.2 ± 2.6 and 4.5 ± 3.8 mm, respectively) (P

Objective: To evaluate whether buccal cortical bone inclination varies for the maxillary alveolar processes of adult patients with decreased, normal, and increased facial heights. Materials and Methods: Cone-beam computed tomography images of 135 adult patients, including 49 hypodivergent subjects (26 women, 23 men), 40 hyperdivergent subjects (24 women, 16 men), and 46 normodivergent (25 women, 21 men) were analyzed. Cortical bone inclination measurements were made relative to the occlusal plane. Cross-sectional slices of the maxilla were taken at interdental sites from the distal aspect of maxillary canine to the mesial aspect of maxillary second molar. Results: Analysis of variance indicated significant differences (P < .05) between the angles formed by the line tangent to the cortical bone and the occlusal plane among the vertical facial types for the regions between canine and first premolar and between second premolar and first molar at miniscrew insertion sites. Conclusion: The results of this study indicate that vertical facial pattern should be taken into consideration when adjusting the insertion angle of miniscrews at the maxillary buccal region.

Lasers are effective in debonding ceramic brackets. Unfortunately, while reducing the adhesive bond strength, lasers are also reported to increase pulpal temperature. The aim of this study was to evaluate the shear bond strengths and temperature increase levels after debonding ceramic brackets using an Er-YAG laser with or without water-cooling. Sixty polycrystalline upper premolar ceramic brackets were placed on the labial surface of sixty human premolar teeth which were randomly divided into three groups of twenty. A laser pulse at 5 W for 9 seconds was delivered to each bracket in both study groups either with water-cooling (water group) or without water-cooling (waterless group) using an Er-YAG laser. Debonding was performed 45 seconds after laser exposure and shear bond strengths were measured. Data comparison revealed a statistically significant difference between the groups. Mean temperature increases of 2.41°C and 4.59°C were recorded for the water and waterless laser groups, respectively. The shear bond strength value for the control group was 22.76 MPa and 10.46 and 6.36 MPa for the water and waterless laser groups, respectively. The application of Er-YAG laser with water-cooling was an efficient and safe method of debonding ceramic brackets. © 2014 Didem Nalbantgil et al.

Introduction: The purpose of this study was to determine the cortical bone thickness of the alveolar process in the maxilla and the mandible on cone-beam computed tomographs of adults with low, normal, and increased facial heights. Methods: This study was conducted on 155 images of adult patients (20-45 years old) who were assigned to the low-angle, normal, and high-angle groups. The thickness of the buccal cortical plates of the maxilla and the mandible, and the palatal cortical plates of the maxilla, were measured. Results: There was no statistically significant difference between the groups regarding mean ages, sex, and sagittal facial types. High-angle patients had significantly lower values than did low-angle patients in all mini-implant insertion sites in both the maxillary and mandibular alveolar bones. The mandibular and maxillary buccal measurements showed a similar pattern; the lowest values were for the high-angle group, followed by the normal group; the highest values were measured in the low-angle patients. Conclusions: Clinicians should be aware of the probability of thin cortical bone plates and the risk of mini-implant failures at maxillary buccal alveolar mini-implant sites in high-angle patients, and at mandibular buccal alveolar mini-implant sites between the canine and the first premolar in normal and high-angle patients. Copyright © 2013 by the American Association of Orthodontists.

Laser use is effective in the debonding of ceramic brackets. However, a standardization of the laser debonding techniques used has not yet been implemented. The purpose of this study was to evaluate the effect of the time lag elapsed between lasing and shearing on debonding of ceramic brackets. One hundred polycrystalline ceramic brackets were placed on human premolar teeth, which were randomly divided into five groups of 20. One group was assigned as the control. The Er-YAG laser was applied on each bracket in four experimental groups at 5 W for 6 s with the scanning method. Debonding was performed 1 s, 18 s, 30 s, or 60 s after laser exposure. Shear bond strengths and adhesive remnant index scores were measured. Statistically significant difference was observed between the control and experimental groups when the data for the shear bond strengths was considered (p < 0.05). Adhesive remnant index scores of the groups were not statistically different (p > 0.05). Debonding ceramic brackets after 18 s when lased 6 s using an Er-YAG laser with the scanning method is safe and also suitable for clinical use since three brackets can be debonded at a time in succession. © 2011 Springer-Verlag London Ltd.

This study was done to determine the amount of lasing time required to remove ceramic brackets safely without causing intrapulpal damage by using Er:YAG laser with the scanning method. Part 1: 80 bovine mandibular incisors with ceramic brackets were randomly assigned into four groups of 20 as one control and three study groups. In the study groups, brackets were debonded after lasing for 3, 6, and 9 s, whereas debonding was performed without lasing in the control group. Shear bond strengths and ARI scores were also measured. Part 2: 30 human premolars with ceramic brackets were randomly divided into three groups of ten, as 3, 6, and 9 s of lasing durations. Intrapulpal temperature was measured at the same lasing times by a thermocouple. Statistically significant lower shear bond strengths were found in study groups compared to the control. A negative correlation was seen between the bond strengths and ARI scores in such a way that, as the shear bond strengths decreased, the ARI scores increased. Temperature increases for all the study groups were measured below the 5.5§C benchmark. All lasing times were effective for debonding without causing enamel tear outs or bracket failures. The temperature proportionally increased with the extension of the lasing duration. Sixsecond lasing by the scanning method using Er:YAG laser was found to be the most effective and safest way of removing the ceramic brackets without causing damage to the enamel and pulpal tissues. © Springer-Verlag London Ltd 2010.