Search

The pathogenesis and progression of several lung disorders is propagated by inflammatory and oxidative processes, which can be controlled by adjunctive inhaled therapies. The present study aimed to develop an inhalable dry powder formulation consisting of co-spray-dried urea-crosslinked hyaluronic acid and sodium ascorbyl phosphate (SD HA-CL-SAP), a novel combination which was recently shown to possess anti-inflammatory, antioxidant, and wound healing properties. Native HA and SAP were co-spray dried (SD HA-SAP) and evaluated as control formulation. Yield (Y%) and encapsulation efficiency (EE%) were 67.0 ± 4.8% and 75.5 ± 7.2% for SD HA-SAP, 70.0 ± 1.5% and 66.5 ± 5.7% for SD HA-CL-SAP, respectively. Both formulations were shown to be suitable for lung delivery in terms of morphology, particle size (median volumetric diameter ∼ 3.4 μm), physical and thermal stability, in vitro aerosol performance - respirable fraction: 30.5 ± 0.7% for SD HA-SAP and 35.3 ± 0.3% for SD HA-CL-SAP. SAP release was investigated using Franz cells and air-interface Calu-3 cell model (>90% of SAP transported within 4 h). The innovative SD HA-CL-SAP formulation holds potential as inhalable dry powder for the treatment of inflammatory lung disorders., (Copyright © 2019 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.)

An innovative lyophilized dry powder formulation consisting of urea-crosslinked hyaluronic acid (HA-CL) and sodium ascorbyl phosphate (SAP) - LYO HA-CL - SAP- was prepared and characterized in vitro for physico-chemical and biological properties. The aim was to understand if LYO HA-CL - SAP could be used as adjuvant treatment for nasal inflammatory diseases. LYO HA-CL - SAP was suitable for nasal delivery and showed to be not toxic on human nasal septum carcinoma-derived cells (RPMI 2650 cells) at the investigated concentrations. It displayed porous, polygonal particles with unimodal, narrow size distribution, mean geometric diameter of 328.3 ± 27.5 µm, that is appropriate for nasal deposition with no respirable fraction and 88.7% of particles with aerodynamic diameter >14.1 µm. Additionally, the formulation showed wound healing ability on RPMI 2650 cells, and reduced interleukin-8 (IL-8) level in primary nasal epithelial cells pre-induced with lipopolysaccharide (LPS). Transport study across RPMI 2650 cells showed that HA-CL could act not only as carrier for SAP and active ingredient itself, but potentially also as mucoadhesive agent. In conclusion, these results suggest that HA-CL and SAP had anti-inflammatory activity and acted in combination to accelerate wound healing. Therefore, LYO HA-CL - SAP could be a potential adjuvant in nasal anti-inflammatory formulations., (Crown Copyright © 2019. Published by Elsevier B.V. All rights reserved.)

This in vitro study evaluated, for the first time, the safety and the biological activity of a novel urea-crosslinked hyaluronic acid component and sodium ascorbyl phosphate (HA-CL - SAP), singularly and/or in combination, intended for the treatment of inflammatory lung diseases. The aim was to understand if the combination HA-CL - SAP had an enhanced activity with respect to the combination native hyaluronic acid (HA) - SAP and the single SAP, HA and HA-CL components. Sample solutions displayed pH, osmolality and viscosity values suitable for lung delivery and showed to be not toxic on epithelial Calu-3 cells at the concentrations used in this study. The HA-CL - SAP displayed the most significant reduction in interleukin-6 (IL-6) and reactive oxygen species (ROS) levels, due to the combined action of HA-CL and SAP. Moreover, this combination showed improved cellular healing (wound closure) with respect to HA - SAP, SAP and HA, although at a lower rate than HA-CL alone. These preliminary results showed that the combination HA-CL - SAP could be suitable to reduce inflammation and oxidative stress in lung disorders like acute respiratory distress syndrome, asthma, emphysema and chronic obstructive pulmonary disease, where inflammation is prominent., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Dry eye syndrome is a common disease which can damage the corneal epithelium. It is treated with eye drops to stimulate tear production and hydrate the corneal surface. The most prescribed artificial tear remedies contain hyaluronic acid (HA), which enhances epithelial wound healing, improving tissue health. To the best of our knowledge, only a few recent studies have investigated cross-linked HA (HA-CL) in eye drops for human applications. This work consists in an in vitro evaluation of the re-epithelialization ability of two different preparations containing a recently synthetized HA cross-linked with urea: 0.02% ( w / v ) HA-CL (solution 1, S1), and 0.4% ( w / v ) HA-CL (solution 2, S2). The study was conducted on both 2D human corneal cells (HCEpiC) and 3D reconstructed tissues of human corneal epithelium (HCE). Viability by 3(4,5-dimethylthiazol-2)2,5-diphenyltetrazolium bromide (MTT) test, pro-inflammatory cytokine release (interleukin-8, IL-8) by ELISA, and morphology by hematoxylin and eosin (HE) staining were evaluated. In addition, to understand the molecular basis of the re-epithelialization properties, cyclin D1 levels were assessed by western blot. The results showed no cellular toxicity, a slight decrease in IL-8 release, and restoration of epithelium integrity when the wounded 3D model was treated with S1 and S2. In parallel, cyclin D1 levels increased in cells treated with both S1 and S2., Competing Interests: The authors declare no conflict of interest. The founding sponsors had no role in the design of the study; in the collection, analyses, or interpretation of data; in the writing of the manuscript, and in the decision to publish the results.

Over the last years, hyaluronic acid (HA) injectable dermal fillers (DFs) have become the most popular agents for soft tissue contouring and volumizing. HA fillers are characterized by most of the properties that an ideal DF should have, due to HA unique chemical-physical properties, biocompatibility, biodegradability, and versatility. Therefore, HA DFs have revolutionized the filler market with a high number of products, which differ in terms of HA source, cross-linkage (agent and degree), HA concentration, hardness, cohesivity, consistency, inclusion or lack of anesthetic, indication, and longevity of correction. The article first provides a general introduction to DF world, and an overview of the different materials is available for fillers. Second, it describes the characteristics and the peculiarities of HA fillers, their differences from the other available materials, and therefore the reasons at the base of their success. Moreover, an update regarding the main Food and Drug Administration (FDA) approved fillers is presented., (Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.)

Hyaluronic acid (HA) is a polymer with unique biological properties that has gained in interest over the years, with applications in pharmaceutical, cosmetic, and biomedical fields; however, its widespread use has been limited by its short half-life. Therefore, a new cross-linked hyaluronic acid was designed and characterized using a natural and safe cross-linking agent, such as arginine methyl ester, which provided improved resistance to enzymatic action, as compared to the corresponding linear polymer. The antibacterial profile of the new derivative was shown to be effective against S. aureus and P. acnes, making it a promising candidate for use in cosmetic formulations and skin applications. Its effect on S. pneumoniae, combined with its excellent tolerability profile on lung cells, also makes this new product suitable for applications involving the respiratory tract. [ABSTRACT FROM AUTHOR]

Hyaluronic acid (HA), an excellent biomaterial with unique bio properties, is currently one of the most interesting polymers for many biomedical and cosmetic applications. However, several of its potential benefits are limited as it is rapidly degraded by hyaluronidase enzymes. To improve the half-life and consequently increase performance, native HA has been modified through cross-linking reactions with a natural and biocompatible amino acid, Ornithine, to overcome the potential toxicity commonly associated with traditional linkers. 2-chloro-dimethoxy-1,3,5-triazine/4-methylmorpholine (CDMT/NMM) was used as an activating agent. The new product (HA–Orn) was extensively characterized to confirm the chemical modification, and rheological analysis showed a gel-like profile. In vitro degradation experiments showed an improved resistance profile against enzymatic digestions. Furthermore, in vitro cytotoxicity studies were performed on lung cell lines (Calu-3 and H441), which showed no cytotoxicity. [ABSTRACT FROM AUTHOR]

Since its first isolation in 1934, hyaluronic acid (HA) has been studied across a variety of research areas. This unbranched glycosaminoglycan consisting of repeating disaccharide units of N-acetyl-d-glucosamine and d-glucuronic acid is almost ubiquitous in humans and in other vertebrates. HA is involved in many key processes, including cell signaling, wound reparation, tissue regeneration, morphogenesis, matrix organization and pathobiology, and has unique physico-chemical properties, such as biocompatibility, biodegradability, mucoadhesivity, hygroscopicity and viscoelasticity. For these reasons, exogenous HA has been investigated as a drug delivery system and treatment in cancer, ophthalmology, arthrology, pneumology, rhinology, urology, aesthetic medicine and cosmetics. To improve and customize its properties and applications, HA can be subjected to chemical modifications: conjugation and crosslinking. The present review gives an overview regarding HA, describing its history, physico-chemical, structural and hydrodynamic properties and biology (occurrence, biosynthesis (by hyaluronan synthases), degradation (by hyaluronidases and oxidative stress), roles, mechanisms of action and receptors). Furthermore, both conventional and recently emerging methods developed for the industrial production of HA and its chemical derivatization are presented. Finally, the medical, pharmaceutical and cosmetic applications of HA and its derivatives are reviewed, reporting examples of HA-based products that currently are on the market or are undergoing further investigations. [ABSTRACT FROM AUTHOR]