Search

Background: Amiloride hydrochloride (AM) is a potassium sparing diuretic, while hydrochlorothiazide (HCZ) is the protype of thiazide diuretics. The combining of the studied drugs exhibits a synergistic effect. Moreover, HCZ prevents the potassium depletion side effect caused by AM., Objective: Two accurate and precise simultaneous chromatographic separation methods were promoted and investigated to quantify AM, HCZ, official impurities of HCZ (cholorothiazide and salamide), and the official impurities of AM (methyl 3, 5-diamino-6-chloropyrazine-2-carboxylate)., Methods: The components of the quintuple mixture were quantified by two methods. The first method was high-performance thin layer chromatography (HPTLC), where exemplary separation was achieved on silica gel HPTLC F254 plates at the stationary phase using ethyl acetate-ethanol-ammonia solution (8 + 2 + 0.2, v/v) as a developing system. Scanning of bands at 273 nm was done. The second method was a reversed-phase chromatography (RP-HPLC) method using C18 (4.6 × 100 mm) column and mobile phase comprising 0.1% phosphoric acid solution-acetonitrile (90 + 10, v/v) with UV determination at 273 nm. Adjustment of the flow rate at 1 mL/min and pH at 3.6 was performed., Results: Regarding RP-HPLC, optimum separation of the quintuple mixture was achieved within just five minutes. According to HPTLC, symmetric and sharp peaks were separated on the resulted chromatogram. Validity of the introduced methods was investigated by applying international conference on harmonization (ICH) guidelines., Conclusions: The methods were successfully applied for assays of the studied drugs in their pure and tablet forms. No significant difference was revealed through application of statistical comparison between results of the suggested methods and those of the reported method regarding both accuracy and precision., (© AOAC INTERNATIONAL 2020. All rights reserved. For permissions, please email: journals.permissions@oup.com.)

Simple, selective and sensitive high-performance thin layer chromatographic (HPTLC) method has been developed and validated for the simultaneous determination of hydrochlorothiazide (HCZ) in the presence of its impurities (chlorothiazide (CT) and salamide (DSA)), in two quaternary mixtures with benazepril hydrochloride (BZ) or amiloride hydrochloride (AM). The separation was carried out on HPTLC silica gel 60 F254 using ethyl acetate-methanol-glacial acetic acid (85:2:0.3 v/v/v) followed by densitometric measurement of bands at 240 nm for the first mixture containing HCZ, CT, DSA, BZ and by using ethyl acetate-methanol-water-ammonia (90:10:5:3 v/v/v) followed by densitometric measurement at 278 nm for the second mixture containing HCZ, CT, DSA, AM. Calibration curves were constructed in the range of (0.2-1.8 µg/band) and (0.4-2.2 µg/band) with good accuracy for HCZ and BZ, respectively, for the first mixture and in the range of (0.6-1.8 µg/band) and (0.4-2.4 µg/band) with good accuracy for HCZ and AM, respectively, for the second mixture. The developed method was validated according to ICH guidelines and demonstrated good accuracy and precision. Moreover, the methods were successfully applied for the determination of HCZ and BZ and AM in pure form and pharmaceutical dosage forms. The results were statically compared with the reported methods with no significant difference, indicating the ability of the proposed method to be used for routine analysis of drug product., (© The Author [2014]. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.)

Partial least squares regression (PLSR) and support vector regression (SVR) are two popular chemometric models that are being subjected to a comparative study in the presented work. The comparison shows their characteristics via applying them to analyze Hydrochlorothiazide (HCZ) and Benazepril hydrochloride (BZ) in presence of HCZ impurities; Chlorothiazide (CT) and Salamide (DSA) as a case study. The analysis results prove to be valid for analysis of the two active ingredients in raw materials and pharmaceutical dosage form through handling UV spectral data in range (220-350 nm). For proper analysis a 4 factor 4 level experimental design was established resulting in a training set consisting of 16 mixtures containing different ratios of interfering species. An independent test set consisting of 8 mixtures was used to validate the prediction ability of the suggested models. The results presented indicate the ability of mentioned multivariate calibration models to analyze HCZ and BZ in presence of HCZ impurities CT and DSA with high selectivity and accuracy of mean percentage recoveries of (101.01±0.80) and (100.01±0.87) for HCZ and BZ respectively using PLSR model and of (99.78±0.80) and (99.85±1.08) for HCZ and BZ respectively using SVR model. The analysis results of the dosage form were statistically compared to the reference HPLC method with no significant differences regarding accuracy and precision. SVR model gives more accurate results compared to PLSR model and show high generalization ability, however, PLSR still keeps the advantage of being fast to optimize and implement., (Copyright © 2014 Elsevier B.V. All rights reserved.)