Search

Floating bodies are widely used in the field of offshore engineering. Existing studies show that the motion responses of a floating body in waves will change with the internal water in the cabins, and it is essential to analyze its hydrodynamic performance under various potential operating conditions. However, most of the research only considers the interaction between the floating body and the internal water in the upright position, and there has been little research on the inclined floating body caused by water partially filled in the broadside. In this study, a floating body with a plurality of longitudinal and transverse cabins was designed. The regular wave model test was carried out in a wave basin, and the numerical results were compared with the experimental results, which verified the accuracy of the model. The effects of wave direction, wave frequency, water-filling depth, and cabin division on the motion responses of the floating body are analyzed. The results show that the water inside the cabins has a significant impact on the roll motion. With the increase of the water-filling depth, the natural frequency of the roll motion decreases. Special attention should be paid to the impact on the wave direction and cabin division on the partially water-filled inclined floating body. [ABSTRACT FROM AUTHOR]

A two-dimensional (2D) simplified model of the very large floating structure (VLFS) is formulated based on Huston's interpretation of the Kane methodology. In this proposed model, the VLFS is considered as a series of discrete floating bodies connected by elastic hinges. The rotation stiffness of elastic hinges has a great influence on the dynamic responses of VLFS and its value is determined based on the vertical displacements equivalent between the simply supported beam model and the elastically hinged multiple bodies model with the same boundary conditions on a concentrated load. Reduced Kane equations are used in the actual dynamic analysis, once initial conditions and mechanical analysis of the system have been formulated. Validation of the Kane-based method and the reliability of the corresponding program developed are established by several comparative studies on a continuous structure and a hinged structure with three parts. The predictions based on the proposed method are essentially identical to the model test data and calculation results provided by related literature. [ABSTRACT FROM AUTHOR]

A two-dimensional model to estimate the hydrodynamic response of hinged multiple floating body systems in the time domain is established based on the Kane method. The reduced Kane equations applicable to the dynamic response of multi-floating body system with hinges are first deduced. The issue of hinge constraint in the system is addressed by defining the corresponding generalized speeds as zeros, while the wave actions are considered based on the potential flow theory. Then the corresponding calculation program is developed prior to undertaking the model test. Verification of the Kane-based model and the veracity of the program developed is performed through a series of contrastive analyses on a hinged floating bridge in various cases including regular waves, moving loads, and their combinations. The predictions obtained by the proposed model show satisfactory agreements with the model test measurements. The related results indicate that the motion responses of the first pontoon are greatest in a hinged floating bridge, and its motion amplitudes descend nonlinearly with the increment of wave frequency. The time-history motion responses of hinged multi-floating bodies in the middle present saddle shapes with some fluctuations as a whole under the combined effect of wave and moving loads. The Kane-based model is convenient to analyze the dynamic characteristics of a hinged multi-floating body system in regular waves, and it could be further extended to consider the effects of irregular waves, inhomogeneous sea conditions, as well as the nonlinear connections on the system. [ABSTRACT FROM AUTHOR]