Search

Collagen/hyaluronan hydrogels with physical properties well suited for biomedical applications are challenging to synthesize due to the formation of polyionic complexes (PICs). A systematic physicochemical study was thus performed to determine novel conditions to inhibit the formation of collagen/hyaluronan PICs and obtain composite hydrogels with high physical properties. Using a range of pH from 1 to 5.5 and the addition of NaCl, type I collagen and tyramine-substituted hyaluronic acid (THA) solutions were mixed and analyzed by cryo-scanning electron microscopy and ATR-FTIR. PIC formation was inhibited at pH 1 without salt and at pH 2.5 and 5.5 in the presence of 400 mM NaCl. Interestingly, collagen fibrils were observed in solution at pH 5.5 before mixing with THA. After collagen gelling by pH increase, a homogeneous hydrogel consisting of collagen fibrils was only observed when PICs were inhibited. Then, the THA gelling performed by photo-crosslinking increased the rheological properties by four when hydrogels were formed with collagen/THA mixtures at pH 1 or 5.5 with salt. Taken together, these results show that a pH of 5.5, close to the collagen isoelectric point, enables the formation of collagen fibrils in solution, inhibits the PICs formation, and allows the formation of homogenous collagen/THA composite hydrogels compatible with cell survival.

Despite the crucial role of the extracellular matrix (ECM) in the organotypic organization and function of skeletal muscles, most 3D models do not mimic its specific characteristics, namely its biochemical composition, stiffness, anisotropy, and porosity. Here, a novel 3D in vitro model of muscle ECM was developed reproducing these four crucial characteristics of the native ECM. An anisotropic hydrogel mimicking the muscle fascia was obtained thanks to unidirectional 3D printing of dense collagen with aligned collagen fibrils. The space between the different layers was tuned to generate an intrinsic network of pores (100 μm) suitable for nutrient and oxygen diffusion. By modulating the gelling conditions, the mechanical properties of the construct reached those measured in the physiological muscle ECM. This artificial matrix was thus evaluated for myoblast differentiation. The addition of large channels (600 μm) by molding permitted to create a second range of porosity suitable for cell colonization without altering the physical properties of the hydrogel. Skeletal myoblasts embedded in Matrigel®, seeded within the channels, organized in 3D, and differentiated into multinucleated myotubes. These results show that porous and anisotropic dense collagen hydrogels are promising biomaterials to model skeletal muscle ECM., Competing Interests: Declaration of competing interest The authors declare no conflict of interests relevant to this work., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Associating collagen with biodegradable hydrophobic polyesters constitutes a promising method for the design of medicated biomaterials. Current collagen-polyester composite hydrogels consisting of pre-formed polymeric particles encapsulated within a low concentrated collagen hydrogel suffer from poor physical properties and low drug loading. Herein, an amphiphilic composite platform associating dense collagen hydrogels and up to 50 wt% polyesters with different hydrophobicity and chain length is developed. An original method of fabrication is disclosed based on in situ nanoprecipitation of polyesters impregnated in a pre-formed 3D dense collagen network. Composites made of poly(lactic- co -glycolic acid) (PLGA) and poly(lactic acid) (PLA) but not polycaprolactone (PCL) exhibit improved mechanical properties compared to those of pure collagen dense hydrogels while keeping a high degree of hydration. Release kinetics of spironolactone, a lipophilic steroid used as a drug model, can be tuned over one month. No cytotoxicity of the composites is observed on fibroblasts and keratinocytes. Unlike the incorporation of pre-formed particles, the new process allows for both improved physical properties of collagen hydrogels and controlled drug delivery. The ease of fabrication, wide range of accessible compositions, and positive preliminary safety evaluations of these collagen-polyesters will favor their translation into clinics in wide areas such as drug delivery and tissue engineering., Competing Interests: The authors declare no conflict of interest., (© 2021 The Authors. Advanced Science published by Wiley‐VCH GmbH.)

A platform of enzymatically-crosslinked Collagen/Tyramine hyaluronan derivative (Col/HA-Tyr) hydrogels with tunable compositions and gelation conditions was developed to evaluate the impact of the preparation conditions on their physical, chemical and biological properties. At low HA-Tyr content, hydrogels exhibited a fibrillar structure, with lower mechanical properties compared to pure Col hydrogels. At high HA-Tyr and Horse Radish Peroxydase (HRP) content, a microfibrillar network was formed beside the banded Col fibrils and a synergistic effect of the hybrid structure on mechanical properties was observed. These hydrogels were highly resistant against enzymatic degradation while keeping a high degree of hydration. Unlike HA-Tyr hydrogels, encapsulation of human dermal fibroblasts within Col/HA-Tyr hydrogels allowed for high cell viability. These results showed that high HA-Tyr and HRP concentrations are required to positively impact the physical properties of hydrogels while preserving collagen fibrils. Those Col/HA-Tyr hydrogels appear promising for novel tissue engineering applications following a biomimetic approach., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

The controlled delivery of multiple drugs from biomaterials is a timely challenge. In particular the nanocomposite approach offers a unique opportunity to combine the scaffold-forming ability and biocompatibility of hydrogels with the versatile and tunable drug release properties of micro- or nano-carriers. Here, we show that collagen-silica nanocomposites allowing for the prolonged release of two topical antibiotics are promising medicated dressings to prevent infection in wounds. For this purpose, core-shell silica particles loaded with gentamicin sulfate and sodium rifamycin were combined with concentrated collagen type I hydrogels. A dense fibrillar network of collagen exhibiting its typical periodic banding pattern and a homogenous particle distribution were observed by scanning electron microscopy. Antibiotics release from nanocomposites allowed a sustained antibacterial effect against Staphylococcus aureus over 10 days in vitro. The acute dermal irritation test performed on albino rabbit skin showed no sign of severe inflammation. The antibacterial efficiency of nanocomposites was evaluated in vivo in a model of cutaneous infection, showing a 2 log steps decrease in bacterial population when loaded systems were used. In parallel, the histological examination indicated the absence of M1 inflammatory macrophages in the wound bed after treatment. Taken together, these results illustrate the potentialities of the nanocomposite approach to develop collagen-based biomaterials with controlled dual drug delivery to prevent infection and promote cutaneous wound repair., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Hybrid and nanocomposite silica-collagen materials derived from concentrated collagen hydrogels were evaluated in vitro and in vivo to establish their potentialities for biological dressings. Silicification significantly improved the mechanical and thermal stability of the collagen network within the hybrid systems. Nanocomposites were found to favor the metabolic activity of immobilized human dermal fibroblasts while decreasing the hydrogel contraction. Cell adhesion experiments suggested that in vitro cell behavior was dictated by mechanical properties and surface structure of the scaffold. First-to-date in vivo implantation of bulk hydrogels in subcutaneous sites of rats was performed over the vascular inflammatory period. These materials were colonized and vascularized without inducing strong inflammatory response. These data raise reasonable hope for the future application of silica-collagen biomaterials as biological dressings., (© 2011 American Chemical Society)

Silica-collagen bionanocomposite hydrogels were obtained by addition of silica nanoparticles to a protein suspension followed by neutralization. Electron microscopy studies indicated that larger silica nanoparticles (80 nm) do not interact strongly with collagen, whereas smaller ones (12 nm) form rosaries along the protein fibers. However, the composite network structurally evolved with time due to the contraction of the cells and the dissolution of the silica nanoparticles. When compared to classical collagen hydrogels, these bionanocomposite materials showed lower surface contraction in the short term (1 week) and higher viability of entrapped cells in the long term (3 weeks). A low level of gelatinase MMP2 enzyme expression was also found after this period. Several proteins involved in the catabolic and anabolic activity of the cells could also be observed by immunodetection techniques. All these data suggest that the bionanocomposite matrices constitute a suitable environment for fibroblast adhesion, proliferation and biological activity and therefore constitute an original three-dimensional environment for in vitro cell culture and in vivo applications, in particular as biological dressings., (2010 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

Since their first description nearly 20 years ago, dense collagen hydrogels obtained by plastic compression have become popular scaffolds in tissue engineering. In particular, when seeded with dental pulp stem cells, they have demonstrated a great in vivo potential in cranial bone repair. Here, we investigated how physico-chemical and cell-seeding conditions could influence the formation and in vitro mineralization of these cellularized scaffolds. A qualitative assessment demonstrated that the gel stability before and after compression was highly sensitive to the conditions of fibrillogenesis, especially initial acid acetic and buffer concentrations. Gels with similar rheological properties but different fibrillar structures that exhibited different stabilities when used for the 3D culture of Stem cells from Human Exfoliated Deciduous teeth (SHEDs) could be prepared. Finally, in our optimal physico-chemical conditions, mineralization could be achieved only using human dental pulp stem cells (hDPSCs) at a high cell density. These results highlight the key role of fibrillogenic conditions and cell type/density on the bone repair potential of cell-laden plastically compressed collagen hydrogels. [ABSTRACT FROM AUTHOR]

Dense collagen hydrogels are promising biomaterials for several tissue-engineering applications. They exhibit high mechanical properties, similar to physiological extracellular matrices, and do not shrink under cellular activity. However, they suffer from several drawbacks, such as weak nutrient and O2 diffusion, impacting cell survival. Here, we report a novel strategy to create a perfusion system within dense and thick collagen hydrogels to promote cell viability. The 3D printing of a thermoplastic filament (high-impact polystyrene, HIPS) with a three-wave shape is used to produce an appropriate sacrificial matrix. The HIPS thermoplastic polymer allows for good shape fidelity of the filament and does not collapse under the mechanical load of the collagen solution. After the collagen gels around the filament and dissolves, a channel is generated, allowing for adequate and rapid hydrogel perfusion. The dissolution process does not alter the collagen hydrogel's physical or chemical properties, and the perfusion is associated with an increased fibroblast survival. Here, we report the novel utilization of thermoplastics to generate a perfusion network within biomimetic collagen hydrogels. [ABSTRACT FROM AUTHOR]