Search

The diesel engine process including fuel injection, fuel spray, air and fuel mixing, ignition and combustion which influences its performance and emission characteristics. The fuel injection and fuel spray are important process as they are directly related to the quality of fuel which results into fluctuating the ignition and combustion characteristics. Ignition in a diesel engine occurs at the edge of the spray depending on the in-cylinder pressure and temperature. Experiments were conducted on a modified dual-fuel diesel engine (3.5 kW power) with fuel additives, diesel and hydrogen (gaseous fuel) at a stable speed of 1500 rpm. Spray behavior and ignition delay were analyzed to determine the impact of fuel additives in neat diesel combined with hydrogen. Additionally, for dual-fuel Cases, the ignition delay correlations provided for diesel engines have been modified as per the experimental results. The injection velocity was maximized with a 15–25% hydrogen substitution range because the fuel density was reduced to a minimum, but it was decreased with the addition of fuel additives. The SMD for hydrogen with neat diesel and diesel with fuel additives both increased up to 20% hydrogen substitution, whereas for higher hydrogen substitution, the Sauter mean diameter decreased. It was found that the addition of fuel additives in diesel resulted into an increased fuel injection velocity (3.3%) with reduced sauter mean diameter of 3.4% while with the lower substitution of H 2 (15%), a maximum increment of 32% in the injection velocity was seen as compared with neat diesel operation. With 15% hydrogen substitution, the change in pressure and density of diesel along with fuel additives accommodated the optimum spray penetration equivalent to neat diesel. In all Cases of hydrogen substitution, the experimental and theoretical values obtained for the chemical ignition delay were found to be consistent with one another except for 35% H 2 showing a maximum deviation of 0.2%. • Addition of fuel additives with higher hydrogen reduced the chemical delay. • TID reduced up to 25% hydrogen, increased with higher hydrogen substitution. • Injection velocity was found optimum in the range of 15–25% hydrogen substitution. • Spray penetration and sauter diameter increased up to 20% hydrogen substitution. [ABSTRACT FROM AUTHOR]

The present study is focused on the combustion behavior, performance and emissions of a modified diesel engine working on dual fuel mode with hydrogen as a gaseous fuel by the inclusion of tri-ethylene glycol mono methyl ether and alumina nanoparticles as fuel additives. The inclusion of tri-ethylene glycol mono methyl ether, alumina and hydrogen separately and simultaneously improved the net heat release with reduced cylinder pressure at high loads as compared with neat diesel. The brake thermal efficiency increased by 22.5% and 11.6% by the inclusion of tri-ethylene glycol mono methyl ether and hydrogen respectively at 50% load, when combined together, it was improved remarkably by 28.15%. The addition of alumina was responsible for a slight reduction in NO x formation at all loads, while it was incremented by hydrogen enrichment at the highest load as compared to pure diesel. The CO formation was incremented by the addition of alumina, while the CO 2 and HC formations were reduced up to 50% load, increased at 70% load. The CO, CO 2 , HC and smoke opacity were reduced with TGME and hydrogen enrichment, while the NO x formation was reduced up to 50% load, then increased at the higher load. • The H 2 enrichment incremented NHR by 21.7% at 356°CA. • A minimum ID of 11°CA was observed in case of D + TGME @5%. • BTE increased by 28.15% at a load of 50% for D + TGME @5% +H 2@35%. • For D + TGME @5% , combustion efficiency improved by 10.4%. • The HC formation was reduced by 21.8% for D + TGME @5% at 50% load. [ABSTRACT FROM AUTHOR]