Search

Basin-wide erosion rates can be determined through the analysis of in situ-produced cosmogenic nu- clides. In transient landscapes, and particularly in mountain catchments, erosion and transport processes are often highly variable and consequently the calculated erosion rates can be biased. This can be due to sediment pulses and poor mixing of sediment in the stream channels. The mixing of alluvial sediment is one of the principle conditions that need to be verified in order to have reliable results. In this paper we perform a field-based test of the extent of sediment mixing for a w42 km2 catchment in the Alps using concentrations of river-born 10Be. We use this technique to assess the mechanisms and the spatio- temporal scales for the mixing of sediment derived from hillslopes and tributary channels. The results show that sediment provenance and transport, and mixing processes have a substantial impact on the 10Be concentrations downstream of the confluence between streams and tributary channels. We also illustrate that the extent of mixing significantly depends on: the sizes of the catchments involved, the magnitude of the sediment delivery processes, the downstream distance of a sample site after a con- fluence, and the time since the event occurred. In particular, continuous soil creep and shallow land- sliding supply high 10Be concentration material from the hillslope, congruently increasing the 10Be concentrations in the alluvial sediment. Contrariwise, a high frequency of mass-wasting processes or the occurrence of sporadic but large-magnitude events results in the supply of low-concentration sediment that lowers the cosmogenic nuclide concentration in the channels. The predominance of mass-wasting processes in a catchment can cause a strong bias in detrital cosmogenic nuclide concentrations, and therefore calculated erosion rates may be significantly over- or underestimated. Accordingly, it is important to sample as close as possible to the return-period of large-size sediment input events. This will lead to an erosion rate representative of the “mass-wasting signal” in case of generally high-frequency events, or the “background signal” when the event is sporadic. Our results suggest that a careful con- sideration of the extent of mixing of alluvial sediment is of primary importance for the correct estimation of 10Be-based erosion rates in mountain catchments, and likewise, that erosion rates have to be inter- preted cautiously when the mixing conditions are unknown or mixing has not been achieved. Basin-wide erosion rates can be determined through the analysis of in situ-produced cosmogenic nuclides. In transient landscapes, and particularly in mountain catchments, erosion and transport processes are often highly variable and consequently the calculated erosion rates can be biased. This can be due to sediment pulses and poor mixing of sediment in the stream channels. The mixing of alluvial sediment is one of the principle conditions that need to be verified in order to have reliable results. In this paper we perform a field-based test of the extent of sediment mixing for a w42 km2 catchment in the Alps using concentrations of river-born 10Be. We use this technique to assess the mechanisms and the spatiotemporal scales for the mixing of sediment derived from hillslopes and tributary channels. The results show that sediment provenance and transport, and mixing processes have a substantial impact on the 10Be concentrations downstream of the confluence between streams and tributary channels. We also illustrate that the extent of mixing significantly depends on: the sizes of the catchments involved, the magnitude of the sediment delivery processes, the downstream distance of a sample site after a confluence, and the time since the event occurred. In particular, continuous soil creep and shallow landsliding supply high 10Be concentration material from the hillslope, congruently increasing the 10Be concentrations in the alluvial sediment. Contrariwise, a high frequency of mass-wasting processes or the occurrence of sporadic but large-magnitude events results in the supply of low-concentration sediment that lowers the cosmogenic nuclide concentration in the channels. The predominance of mass-wasting processes in a catchment can cause a strong bias in detrital cosmogenic nuclide concentrations, and therefore calculated erosion rates may be significantly over- or underestimated. Accordingly, it is important to sample as close as possible to the return-period of large-size sediment input events. This will lead to an erosion rate representative of the “mass-wasting signal” in case of generally high-frequency events, or the “background signal” when the event is sporadic. Our results suggest that a careful consideration of the extent of mixing of alluvial sediment is of primary importance for the correct estimation of 10Be-based erosion rates in mountain catchments, and likewise, that erosion rates have to be interpreted cautiously when the mixing conditions are unknown or mixing has not been achieved.

Colluvial sediment dynamics are examined using a 70-year landslide inventory in formerly glaciated mountain drainage basins of coastal British Columbia, Canada. Landslide sediment transfer is documented by identifying landslide types, and by characterizing preferential sites of landslide initiation, delivery, and storage across spatial scales. Data analysis reveals that open-slope landslides delivering material to seasonal or perennial channels and fluvial terraces are the dominant mechanisms of sediment transfer. This finding suggests high instability of the low-order channel network and its ongoing re-organization (degradation) after generalized sediment recharge occurred in the last glacial maximum. In the study period, landslide activity across the landscape has generated net degradation on planar slopes and first-order colluvial channels, whereas unchannelled valleys, higher-order colluvial channels and alluvial channels have accumulated material. The scaling relation of the landslide sediment yield appears to be controlled by the spatial arrangement of the relict glacial macro-forms. Landslide yield is highest in unchannelled topography, decreases at the scale of channel initiation (Ad~0.002 km2), and remains constant for drainage areas where length scales of cirque/valley walls and hanging valley floors overlap (0.002bAdb0.06). Injections of landslide material start declining consistently beyond areas larger than 0.6 km2 (the scale of relict glacial trough initiation), where fluvial environments become increasingly disconnected from landslide inputs. Cumulative yield indicates that colluvial sediment redistribution is limited to small basins; specifically, 90% of the colluvial load is released at scales smaller than about 0.6 km2

This paper reviews sediment transport and ch a n n e l morphology in small, forested streams in the Pacific Northwest region of North America to assess current knowledge of ch a n n e l stability and morphology relevant to riparian management practices around small streams. Small channels are defined as ones in w h i ch morphology and hydraulics may be significantly influenced by individual clasts or wood materials in the channel. Such channels are headwater channels in close proximity to sediment sources, so they reflect a mix of hillslope and channel processes. Sediment inputs are derived directly from adjacent hillslopes and from the channel banks. Morphologically significant sediments move mainly as bed load, mainly at low intensity, and there is no standard method for measurement. The larger clastic and woody elements in the channel form persistent structures that trap significant volumes of sediment, reducing sediment transport in the short term and substantially increasing channel stability. The presence of such structures makes modeling of sediment flux in these channels – a potential substitute for measurement – difficult. Channel morphology is discussed, with some emphasis on wood related features. The problem of classifying small channels is reviewed, and it is recognized that useful classifications are purpose oriented. Reach scale and channel unit scale morphologies are categorized. A “disturbance cascade” is introduced to focus attention on sediment transfers through the slope channel system and to identify management practices that affect sediment dynamics and consequent ch a n n e l m o r p h o l o g y. Gaps in knowledge, errors, and uncertainties hav e been identified for future research.

article i nfo This study examines channel-reach morphology and bedload yield dynamics in relation to landscape structure and snowmelt hydrology in headwater streams of the Columbia Mountains, Canada. Data collection relies on field surveys and geographic information systems analysis in conjunction with a nested monitoring network of water discharge and bedload transfer. The landscape is characterized by subdued, formerly- glaciated upland topography in which the geomorphic significance of landslides and debris flows is negligible and fluvial processes prevail. While the spatial organization of channel morphology is chiefly controlled by glacially imposed local slope in conjunction with wood abundance and availability of glacigenic deposits, downstream patterns of the coarse grain-size fraction, bankfull width, bankfull depth, and stream power are all insensitive to systematic changes of local slope along the typically stepped long profiles. This is an indication that these alluvial systems have adjusted to the contemporary snowmelt-driven water and sediment transport regimes, and as such are able to compensate for the glacially-imposed boundary conditions. Bedload specific yield increases with drainage area suggesting that fluvial re-mobilization of glacial and paraglacial deposits dominate the sedimentary dynamics of basins as small as 2 km 2 . Stepwise multiple regression analysis shows that annual rates of sediment transfer are mainly controlled by the number of peak events over threshold discharge. During such events, repeated destabilization of channel bed armoring and re-mobilization of sedi- ment temporarily stored behind LWD structures can generate bedload transport across the entire snowmelt season. In particular, channel morphology controls the variability of bedload response to hydrologic forcing. In the present case studies, we show that the observed spatial variability in annual bedload yield appears to be modulated by inter-basin differences in morphometric characteristics, among which slope aspect plays a critical part.

Debris flow is an efficient process of sediment transfer from slope base to piedmont depositional fans in mountain drainage basins. To advance understanding of debris-flow sediment dynamics at the regional scale, we analyze a historical (1998–2009) database of debris flows from 77 basins of Alto Adige Province, northeastern Italy. By combining information on event volumetric deposition, high-resolution digital topography, and Quaternary sediment mapping we are able to link debris-flow sediment flux to morphometry, lithologic variability, and sediment availability. We show that basin-wide specific sediment yield (SSY) scales as an inverse power function of basin area. This function is strongly controlled by the way rock type and abundance of Quaternary deposits affect the rate of downstream sediment recruitment. When sediment flux associated with each debris-flow event is subsumed across discrete spatial increments of the entire region, a complex sedimentary signature in the area-SSY space is apparent. That is, SSY increases downstream up to areas as large as 1 km2, and starts to decline beyond this scale, regardless of sediment availability. We propose that this area-SSY relation is characteristic of debris flow–dominated settings.

[1] We examine the spatial distribution of channel-reach morphologies in formerly glaciated mountain drainage basins of coastal British Columbia, Canada. Using field- and geographic information systems-derived data, we show that the local channel slope and the degree of colluvial-alluvial coupling imposed by the glacial valley morphology dictate the spatial organization of channel types. In particular, the complex, glacially induced channel long profile produces characteristic sequences of channel reaches that depart from the downstream succession (colluvial/boulder-cascade/step-pool/rapids/riffle-pool) distinctive of simple unglaciated mountain streams. Typically, the presence of one hanging valley in the river long profile produces and separates two full successions of channel types: a headmost one characterized by an ephemeral/seasonal hydrologic regime and a downstream one, where water runoff is perennial. We document that channel types are well separated in plots of slope versus shear stress, area versus shear stress, and slope versus relative roughness. In agreement with these outcomes, multivariate discriminant analyses coupled with principal component analysis of 98 study reaches yield a highly successful channel-type classification when slope, shear stress, and relative roughness are considered. Success rates, depending on whether or not boulder-cascade reaches are pooled together with step-pools, are 88% and 75%, respectively. Previous work in unglaciated settings has suggested that mountain channels have distinct bed morphology states that vary primarily with slope; our study reveals that even in formerly glaciated valleys, where slope is largely inherited from glacial times, these distinct bed states exist and vary (mostly) with slope, adding considerable strength to this empirical knowledge.

We examine the sensitivity of 10Be concentrations (and derived denudation rates), to debris‐flow and anthropogenic perturbations in steep settings of the Eastern Alps, and explore possible relations with structural geomorphic connectivity. Using cosmogenic 10Be as a tracer for functional geomorphic connectivity, we conduct sampling replications across four seasons in Gadria, Strimm and Allitz Creek. Sampling sites encompass a range of structural connectivity configurations, including the conditioning of a sackung, all assessed through a geomorphometric index (IC). By combining information on contemporary depth of erosion and sediment yield, disturbance history and post‐LGM (Last Glacial Maximum) sedimentation rates, we constrain the effects of debris‐flow disturbance on 10Be concentrations at the Gadria sites. Here, we argue that bedrock weakening imparted by the sackung promotes high depth of erosion. Consequently, debris flows recruit sediment beyond the critical depth of spallogenic production (e.g., >3 m), which in turn, episodically, due to predominantly muogenic production pathways, lowers 10Be concentration by a factor of 4, for at least 2 years. In contrast, steady erosion in Strimm Creek yields very stable 10Be concentrations through time. In Allitz Creek, we observe two‐ to fourfold seasonal fluctuations in 10Be concentrations, which we explain as the combined effects of water diversion and hydraulic structures on sediment mixing. We further show that 10Be concentration correlates inversely with the IC index, where sub‐basins characterized by high concentrations (long residence times) exhibit low IC values (structurally disconnected) and vice versa, implying that, over millennial time scales a direct relation exists between functional and structural connectivity, and that the IC index performed as a suitable metric for structural connectivity. The index performs comparably better than other metrics (i.e., mean slope and mean normalized channel steepness index) previously used to assess topographic controls on denudation rates in active unglaciated ranges. In terms of landscape evolution, we argue that the sackung, by favouring intense debris‐flow activity across the Holocene, has aided rapid postglacial reshaping of the Gadria basin, which currently exhibits a topographic signature characteristic of unglaciated debris‐flow systems. © 2020 John Wiley & Sons, Ltd. ISSN:0197-9337 ISSN:1096-9837

Landslide inventories are routinely compiled by means of aerial photo interpretation (API). When examining photo pairs, the forest canopy (notably in old-growth forest) hides a population of "not visible" landslides. In the present study, we attempt to estimate how important is the contribution of landslides not detectable from aerial photographs to the global mass of sediment production from mass failures on forested terrain of the Capilano basin, coastal British Columbia. API was coupled with intensive fieldwork for identification and measurement of all landslides. A 30-year framework was adopted. We show that "not visible" landslides can represent up to 85% of the total number of failures and account for 30% of the volume of debris mobilised. Such percentages display high sub-basin variability with rates of sediment production varying by one order of magnitude between two sub-basins of the study area. This is explained qualitatively by GIS-based analysis of slope frequency distributions, drainage density, and spatial distribution of surficial materials. Such observations find further support in the definitions of transport-limited and supply-limited basins. As a practical consideration to land managers, we envisage that supplementary fieldwork for landslide identification is mandatory in transport-limited systems only. Fieldwork has demonstrated that gully-related failures have a greater importance than one could expect from API. © 2002 Elsevier Science B.V. All rights reserved.

The impacts of logging activities on mass wasting were examined in five watersheds in the coastal mountains of British Columbia. Historical aerial photos were used to document mass wasting events, and their occurrence was related to logging activities in the study basins. Logged and forested areas were compared in terms of mass wasting magnitude and frequency, with reference to site characteristics. The recovery time of the landscape after logging was assessed. Bedrock type and basin physiography had no identifiable effect on mass wasting frequency and magnitude. Mass wasting failure was primarily controlled by slope gradient. Basin vulnerability increased, following clearcutting relative to forested areas, in that mass wasting was initiated on gentler slopes. The volume of sediment produced from logged slopes is of the same order as that from forested areas, which are steeper by as much as 10°. In both logged and forested areas, the size distribution of mass wasting events follows an exponential distribution. However, the variability in mass wasting size in forested areas is much higher than that obtained for logged areas. The recovery time after forest harvesting is over 20 years, which confirms published estimates based on vegetation reestablishment. Continuous disturbance of the basin, however, may extend the recovery time for the whole basin well beyond 20 years. © 2002 Elsevier Sciece B.V. All rights reserved.