Search

In the context of the energy transition, new construction materials are emerging, notably bio-based materials such as wood concrete. This paper investigates the hygrothermal performance of walls constructed with wood–cement concrete. First, the thermal properties of wooden concrete, namely thermal conductivity, effusivity, and diffusivity, are experimentally characterized in both dry and wet conditions. Second, in situ measurements are carried out on a house in Lyon, a city in France, constructed with mono-layered wood–cement walls. This involves monitoring the temperature and relative humidity levels both inside and outside the building, as well as at three distinct positions within the wood walls over a 6-month period (from 20 April 2023 to 20 October 2023). The hygrothermal analysis at the center of the wall reveals that the wood wall effectively moderates fluctuations in the external temperature and relative humidity. Following this, a numerical study is performed to check the reliability of the adopted Reduced Heat, Air, and Mass (HAM) model to reproduce the hygrothermal performance of the wood–cement wall. The results show a strong agreement between the simulated and measured data, confirming the applicability of the 'Reduced HAM' model for the prediction of the hygrothermal behavior of wood–cement walls. [ABSTRACT FROM AUTHOR]

Straw bale building construction is attracting a revived public interest because of its potential for reduced carbon footprint, hygrothermal comfort, and energy savings at an affordable price. The present paper aims to summarize the current knowledge on straw bale construction, using available data from academic, industry, and public agencies sources. The main findings on straw fibers, bales, walls, and buildings are presented. The literature shows a wide variability of results, which reflects the diversity of straw material and of straw construction techniques. It is found that the effective thermal conductivity, density, specific heat, and elastic modulus of straw bales used in construction are in the range 0.033–0.19 W/(m·K), 80–150 kg/m3, 1075–2000 J/(kg·K), and 150–350 kPa respectively. Most straw-based multilayered walls comply with fire resistance regulations, and their U-value and sound reduction index range from 0.11 to 0.28 W/m2 K and 42 to 53 dB respectively, depending on the wall layout. When compared to standard buildings, straw bale buildings do provide yearly reductions in carbon emissions and energy consumption. The reductions often match those obtained after applying energy-saving technologies in standard buildings. The paper ends by discussing the future research needed to foster the dissemination of straw bale construction. [ABSTRACT FROM AUTHOR]

• The interconnections distribution in fibers determines the heat transfer model. • The development of a thermal conductivity equation considers the radiative heat transfer. • The bale's thermal conductivity varies according to the fiber orientation. • Thermal conductivity depends on the chemical composition of the straw. Straw fibers are natural fibers that have a strong insulating property and a minimal environmental effect, making them suitable construction materials. In the construction sector, to predict the building energy consumption, the thermal conductivity of the materials composing the envelopes must be precisely known, which is not the case for the straw material. The properties of a straw bale are variable and mainly depend on its density, fibers orientation, chemical composition, temperature and relative humidity. Consequently, this study consists of determining a mathematical equation to predict the effective thermal conductivity of straw bales that can be applied to all straw types, in different circumstances. For this purpose, the size, distribution, and morphology of straw fibers are first determined from microscopic images. Second, a mathematical model for estimating the thermal conductivity is suggested using the heat transfer models of porous and fibrous materials. The numerical model is validated by an experimental study that measures the thermal conductivity of straw bales by altering their density between 80 and 120 kg/m3, their relative humidity between 15 % and 95 %, and their temperature between 15 ˚C and 55 ˚C. The experimental results show that the thermal conductivity increases from a minimum of 0.047 W/(m∙K) to a maximum of 0.09 W/(m∙K) when increasing the three altered factors. For a straw fiber having 40% cellulose content, the thermal conductivity increased from a minimum of 0.05 W/(m∙K) to a maximum of 0.0832 W/(m∙K). This behavior is found the same for the numerical findings. The comparison of numerical and experimental values shows a good agreement, with a root mean square error of 0.005 W/(m∙K) and a scatter index of 5.5 %. [ABSTRACT FROM AUTHOR]

The shift towards using materials derived from plants is considered an innovative approach to creating eco-friendly buildings and decreasing the energy expenses associated with the building sector. This study aims to provide a comprehensive analysis of these materials' hygrothermal properties to support their successful integration in both new construction and building renovation projects. It reviews the current state of research on the thermal and hydric properties of plant materials on various scales: raw aggregate/fiber, plant-based composite, wall, and building scale. The first part focuses on the physical, chemical, and hygrothermal characterizations of raw plant aggregates and fibers. The second part covers the main hygrothermal properties of plant-based composites (insulation boards and concretes) and compares their performance with conventional materials. The study then shifts its focus to the hygrothermal performance of walls integrated with plant-based materials in response to external climate conditions. Finally, a review of full-size buildings is conducted to investigate the impact of these materials on hygrothermal behavior at the building scale and to highlight their influence on the reduction of energy consumption. A lack of studies on plant-based materials was observed. There remain numerous areas that require further investigation at each scale. Consequently, the study includes discussion sections that provide guidance for future research to fill the gaps and advance the development of this type of material. • Up-to-date literature on plant-based building materials at various scales is reviewed. • The physical, chemical, and hygrothermal properties of raw plant aggregates and fibers are discussed. • The hygrothermal properties of plant-based composites, insulation boards, and concretes are discussed. • The application of plant materials at the wall scale is reviewed. • The hygrothermal comfort and energy performance of plant-based composites at the building scale are highlighted. • Future studies are proposed to fully explore the potential of plants as sustainable building materials. [ABSTRACT FROM AUTHOR]

In this study, we present a recently patented insulating rendering based on silica-aerogels. It is mainly developed for exterior thermal insulation applications. In addition to new buildings, it can be used for retrofitting existing ones since it has a high insulation performance and its application is easy, compatible with the traditional masonry facades, and using the well-known ordinary techniques. The objectives are to examine the hygrothermal performance of walls with this rendering and to compare different thermal insulation configurations. The methodology followed is developing a numerical model, then conducting an experimental set-up on a test-cell having the rendering on its south wall to validate the numerical model under real weather conditions. Different exterior wall structures are examined: no insulation, exterior insulation using this rendering, interior insulation, and interior and exterior insulation. Six assessment criteria are used: assembly water content, drying rate, mold growth, condensation risk, ASHRAE-160 criterion, and heat losses. Results show that interior thermal insulation systems can cause several moisture problems: inability to dry out over the years, condensation risk, etc. Adding the aerogel-based rendering on the exterior surface of the un-insulated or the already internally insulated walls reduces significantly or even removes the moisture risks. Also, it reduces significantly the wall heat losses. [ABSTRACT FROM AUTHOR]

• The temperature and relative humidity variations obtained by WUFI are in good agreement with the literature experimental findings. • The excessive moisture content in straw leads to bio-deterioration, mold, and decay damage in the whole structure. • The hygrothermal issues in a straw wall depend on the interior and exterior covering layers. • Hygrothermal issues can be solved by adding the straw thickness, adding a vapor retarder layer, adding an unventilated air layer, and controlling the indoor conditions. Straw is becoming a promising alternative insulation material to improve the building energy performance because of its low cost, large availability as cereal waste, its good hygrothermal properties, and its low embodied energy. The goal of this paper is to assess the hygrothermal performance of multi-layered straw walls with different boundary conditions. The study consists of evaluating five different straw-based wall assemblies, under a continental (Arkhangelsk, Russia), a tropical climate (Brasilia, Brazil), a temperate Mediterranean climate (Nice, France), and a cold desert climate Xinjiang (China). Numerical models of the heat and moisture transfer through the walls using WUFI software are developed, calibrated, and validated through experimental results from the literature. The chosen evaluation criteria are the total water content, the drying rate, the condensation risk, the mold growth, the moisture quantity, the time lag, and the decrement factor. Results show that straw walls with cement and/or wood covering can be used in tropical and temperate climates, coated straw walls with additional air layers in dry climates, while insulated straw walls are best fitted in continental climates. In the latter, the dryness rate varies between 7 and 40% with a low condensation risk of value in the range of 0–12%. It can be concluded that the straw wall's performance strongly depends on the interior and exterior added thermal insulation layers since they affect the ability of the material to dry out. [ABSTRACT FROM AUTHOR]