Search

The monitoring of runway surfaces, for the detection of ice formation or presence of water, is an important issue for reducing maintenance costs and improving traffic safety. An innovative sensor was developed to detect the presence of ice or water on its surface, and its repeatability, stability and reliability were assessed in different simulations and experiments, performed both in laboratory and in the field. Three sensors were embedded in the runway of the Turin-Caselle airport, in the north-west of Italy, to check the state of its surface. Each sensor was connected to a GPRS modem to send the collected data to a common database. The entire system was installed about three years ago, and up to now it shows correct work and automatic reactivation after malfunctions without any external help. The state of the runway surface is virtual represented in an internet website, using the Internet of Things features and opening new scenarios. [ABSTRACT FROM AUTHOR]

The reliable detection of water and ice over road surfaces is an important issue in improving the traffic safety and in reducing the costs for maintenance, particularly during winter. A low-cost capacitive sensor for the estimation of road conditions is studied. A simulation model was developed to investigate the capacitance of the sensor when air, water, or ice is covering its surface and to assess the effect of the variation of an environmental temperature or of the thickness of water or ice. An algorithm for the estimation of the state of the sensor (dry, wet, or icy) was developed based on the results of the simulations, which indicated that the time derivative of the estimated capacitance provided optimal information. The accuracy and reliability of the estimates provided by the sensor were assessed in laboratory experiments, placing more sensors in a climatic chamber and investigating the estimated state of the sensors and the timing of the identification of wet-icy or icy-wet transitions. Reliable estimates were obtained by all the sensors, with a dispersion of the transition times on the order of a few minutes. The sensor was also investigated in the field. Two sensors (one of which was bituminized) were embedded in a road pavement to monitor continuously the road surface condition for a month. Both sensors provided indications in line with the environmental conditions, identifying properly the icy condition and indicating the wet state of the road during both rain and fog. Thus, the sensor is suggested as a feasible tool for monitoring the road conditions to support information systems improving the security and efficient maintenance of roads during winter. [ABSTRACT FROM AUTHOR]