Search

For a dual five-level inverter-fed induction motor (IM) drive, effects of dc-neutral currents on dc-link capacitor voltage fluctuations are analyzed in this paper. Operating limitations in achieving the dual task of common-mode voltage elimination and dc-link capacitor voltage balancing with a single dc power supply are further investigated for the proposed drive. In this paper, an open-loop control scheme, which uses only the availability of redundant switching states for the inverter control, is presented. Limitation of proposed open-loop control to take corrective action for any existing unbalance in capacitor voltages calls for a closed-loop control scheme, which is presented in Part II of this paper. [ABSTRACT FROM AUTHOR]

A current error space phasor based simple hysteresis controller is proposed in this paper to control the switching frequency variation in two-level pulsewidth-modulation (PWM) inverter-fed induction motor (IM) drives. A parabolic boundary for the current error space phasor is suggested for the first time to obtain the switching frequency spectrum for output voltage with hysteresis controller similar to the constant switching frequency voltage-controlled space vector PWM-based IM drive. A novel concept of online variation of this parabolic boundary, which depends on the operating speed of motor, is presented. A generalized technique that determines the set of unique parabolic boundaries for a two-level inverter feeding any given induction motor is described. The sector change logic is self-adaptive and is capable of taking the drive up to the six-step mode if needed. Steady-state and transient performance of proposed controller is experimentally verified on a 3.7-kW IM drive in the entire speed range. Close resemblance of the simulation and experimental results is shown. [ABSTRACT FROM AUTHOR]

In this paper, a 12-sided polygonal voltage space vector generation with common-mode voltage elimination (CME) is proposed for an induction motor drive. An open-end winding configuration is used for the motor. The proposed multilevel structure is achieved by cascading only the conventional two-level inverters with asymmetrical dc link voltages. By appropriately selecting the voltage vectors with identical common-mode voltage from the opposite ends, a pulsewidth modulation (PWM) strategy with zero common-mode voltage variation can be achieved for the entire modulation range with a common dc link requirement for both the inverter systems. Along with the CME, the proposed 12-sided polygonal space vector based multilevel inverter structure has increased modulation range with the absence of 5th, 7th, 17th, 19th, etc., harmonics up to 12-step operation. The bandwidth problems associated with conventional hexagonal voltage space vector structure current controllers due to the presence of 5th and 7th harmonics in the overmodulation region are absent in the present 12-sided structure. So a simple PWM voltage control with linear voltage control up to 12-step operation is possible from the present 12-sided scheme with less current control complexity. [ABSTRACT FROM AUTHOR]

The simultaneous elimination of common-mode voltage and DC-link capacitor voltage imbalance is achieved in a five-level inverter scheme for an induction motor drive throughout its operating range. A dual five-level inverter-fed open-end-winding induction motor structure is used for the proposed drive. Initially, the operating limitations of achieving this dual task for the five-level inverter configuration are investigated for a single DC power supply. Subsequently, a switching strategy for a five-level inverter topology with two DC power supplies is proposed to achieve the dual task over the entire speed range of the drive. The proposed drive offers a simple power-bus structure with more redundant switching combinations for inverter voltage vectors, and requires a lower voltage-blocking capacity of the power devices as compared with the conventional single five-level inverter-fed drive. As only the availability of redundant switching combinations for inverter voltage vectors is exploited, the dual task is achieved without disturbing the fundamental component of the inverter output voltage and the scheme does not need any extra control circuit hardware. Experimental verification of the proposed scheme is done on a 1.5 kW induction motor drive in the linear as well as overmodulation range. [ABSTRACT FROM AUTHOR]