Search

A novel bidirectional dc–dc converter having high voltage gain capability with high efficiency is proposed in this paper for interfacing storage in a range of applications. The proposed converter steps up (boost) the voltage in one direction while stepping it down (buck) in the other direction of operation. An attractive feature of the proposed converter is the symmetry of its operating modes. It also has inherent soft-switching capability during turn on of the switches, enabling high switching frequency operation. This, coupled with the fact that the proposed converter uses only one coupled inductor for both boost and buck modes, leads to a compact system. A clamped capacitor network is used to recover the leakage energy. Circuit description, design, and loss calculations for both buck and boost modes are explained. The bidirectional converter is designed for a voltage gain of 10 and (1/10) in the boost and buck modes, respectively. A 500 W laboratory prototype of the proposed converter has been developed and tested under rated conditions. Even for a large voltage gain of 10, a peak efficiency in excess of 94% is achieved, which is not possible with conventional converters. All the results of this work are included. [ABSTRACT FROM AUTHOR]

Usually, the high-gain high-efficiency dc–dc converters consist of many passive components, which increases the order of the system. As the order increases, system modeling and control become more complex. Thus, there is a need for the simplification of the small signal modeling process of such converters. This paper presents a generalized small signal model and equivalent circuit for an $n$ th-order coupled-inductor-based high-voltage gain converters (CIHVGC) that can be conveniently used for the control design. The state variable representation of a generalized coupled inductor with p windings is included. A simplified step by step procedure to obtain small signal model using visual inspection is presented. Analysis is included and verified using simulations and experiments for the output voltage regulation of high-voltage gain converters. The usefulness and versatility of the proposed model is verified with three examples of high gain converters belonging to the CIHVGC family. All the analytical, simulation, and experimental details of this paper are presented. [ABSTRACT FROM AUTHOR]

Renewable sources like solar photovoltaic (PV) and fuel cell stack are preferred to be operated at low voltages. For applications such as grid-tied systems, this necessitates high voltage boosting resulting in efficiency reduction. To handle this issue, this paper proposes a novel high voltage gain, high-efficiency dc–dc converter based on coupled inductor, intermediate capacitor, and leakage energy recovery scheme. The input energy acquired from the source is first stored in the magnetic field of coupled inductor and intermediate capacitor in a lossless manner. In subsequent stages, it is passed on to the output section for load consumption. A passive clamp network around the primary inductor ensures the recovery of energy trapped in the leakage inductance, leading to drastic improvement in the voltage gain and efficiency of the system. Exorbitant duty cycle values are not required for high voltage gain, which prevents problems such as diode reverse recovery. Presence of a passive clamp network causes reduced voltage stress on the switch. This enables the use of low voltage rating switch (with low “on-state” resistance), improving the overall efficiency of the system. Analytical details of the proposed converter and its hardware results are included. [ABSTRACT FROM PUBLISHER]

This paper proposes a novel 3 $\phi$ stand-alone solar photovoltaic (PV) system configuration that uses high-gain high-efficiency $(\approx\! 96\%)$ dc–dc converters both in the forward power stage and the bidirectional battery interface. The high-voltage-gain converters enable the use of low-voltage PV and battery sources. This results in minimization of partial shading and parasitic capacitance effects on the PV source. Series connection of a large number of battery modules is obviated, preventing the overcharging and deep discharging issues that reduce the battery life. In addition, the proposed configuration facilitates “required power tracking (RPT)” of the PV source as per the load requirements, eliminating the use of expensive and “difficult to manage” dump loads. High-performance inverter operation is achieved through $abc$ to $dq$ reference frame transformation, which helps in generating precise information about the load's active power component for RPT, regulation of ac output voltage, and minimization of control complexity. Inverter output voltage is regulated by controlling the modulation index of sinusoidal pulsewidth modulation, resulting in a stable and reliable system operation. The active power demand is controlled by regulating the dc link voltage. All the analytical, simulation, and experimental results of this work are presented. [ABSTRACT FROM PUBLISHER]