Search

In a three-phase three-level grid-connected inverter, the ac output current ripple actually fluctuates four times per switching period with each fluctuation generating some core loss. However, only the two larger fluctuations are considered in most loss estimation methods, resulting in a smaller core loss evaluation. In this letter, an alternative method has, hence, been proposed, beginning with the deduction of fundamental and ripple equivalent circuits from the inverter. These circuits permit current ripple to be calculated, from which its four fluctuations are all considered for forming the dual current-ripple envelopes (DCREs). These DCREs, together with the fundamental current and a selected core loss model, can then be solved to give the estimated fundamental and ripple core loss values. The nonlinear characteristic of the filter inductor has also been considered in the calculation of the DCREs and the core loss. The estimated values have eventually been verified through testing with a 10-kW three-phase T-type three-level grid-connected inverter. [ABSTRACT FROM AUTHOR]

The adoption of silicon carbide (SiC) MOSFETs and SiC Schottky diodes in power converters promises a further improvement of the attainable power density and system efficiency, while it is restricted by several issues caused by the ultrafast switching, such as phase-leg shoot-through (“crosstalk” effect), high turn-on losses, electromagnetic interference (EMI), etc. This paper presents a split output converter, which can overcome the limitations of the standard two-level voltage source converters when employing the fast-switching SiC devices. A mathematical model of the split output converter has been proposed to reveal how the split inductors can mitigate the crosstalk effect caused by the high switching speed. The improved switching performance (e.g., lower turn-on losses) and EMI benefit have been demonstrated experimentally. The current freewheeling problem, the current pulses and voltage spikes of the split inductors, and the disappeared synchronous rectification are explained in detail both experimentally and analytically. The results show that the split output converter can have lower power device losses compared with the standard two-level converter at high switching frequencies. However, the extra losses in the split inductors may impair the efficiency of the split output converter, which is verified by experiments in the continuous operating mode. A 95.91% efficiency has been achieved by the split output converter at the switching frequency of 100 kHz with suppressed crosstalk, lower turn-on losses, and reduced EMI. [ABSTRACT FROM AUTHOR]